Robertson Unit (RBU) is a unit of measurement commonly used by oil and gas companies to measure commodities, such as crude oil and natural gas. It is most commonly used in North America and is similar to a barrel of oil.
A Robertson Unit is equal to 42 U. S. gallons in volume, which is equal to approximately 159 liters. This unit can be used to measure both liquids and gases, and is often used to track production, consumption, and pricing of commodities.
Furthermore, compared to other measures such as cubic feet, RBUs are easier to calculate due to their standardized unit size. It is possible to convert from other forms of measurements such as cubic feet to RBUs using a simple equation.
Table of Contents
Is Robertson unit a maximum-security?
Yes, the Robertson Unit is classified as a maximum-security prison. Located in Abilene, Texas, the Robertson Unit is administered and operated by the Texas Department of Criminal Justice. It is one of the oldest operating prisons in the state, having opened in 1889.
Inmate security at the Robertson Unit is separated into three custody levels: Administrative Segregation, Trusty Custody, and General Population. The majority of inmates at Robertson are classified as maximum security, with the rest held in intermediate and minimum security housing.
All inmates are closely monitored by corrections officers and are subject to frequent security checks. Inmates held at the Robertson Unit are subjected to highly secure practices, including cell checks, restricted access, electronic monitoring, and solitary confinement for serious offenses.
Which TDCJ units are transfer units?
The Texas Department of Criminal Justice (TDCJ) operates nearly 100 correctional facilities across the state of Texas. Of these facilities, eight are designated as transfer units – meaning they are used to receive offenders from other locations, process them, and transfer them to other long-term units.
The eight units are:
• Allred Unit (Iowa Park): A secure adult male facility for the confinement of both pre-sentence and sentenced offenders classified for transfer
• Formby Unit (Plainview): A secure adult male facility for the confinement of both pre-sentence and sentenced offenders classified for transfer
• Beto Unit (Tennessee Colony): A secure adult male facility for the confinement of both pre-sentence and sentenced offenders classified for transfer
• Middleton Transfer Facility (Abilene): An administrative administrative prison for housing adult males awaiting transfer to other units
• Briscoe Unit (Dilley): A secure adult male prison transitional unit for transfer of sentenced and paroled male offenders
• Collins Unit (Archer City): A secure adult male facility for the confinement of both pre-sentence and sentenced offenders classified for transfer
• Crain Unit (Archer City): A secure adult male facility for the confinement of both pre-sentence and sentenced offenders classified for transfer
• Sanchez Unit (El Paso): A secure adult male facility for the confinement of both pre-sentence and sentenced offenders classified for transfer
The list of transfer units may change due to population fluctuations or changes in facility designations. In addition, while some transfer units may provide certain programs and services, these may vary from unit to unit and any offender who is transferred to one of these units will be assigned to the unit that best meets their individual needs.
What is the biggest TDCJ unit in Texas?
The largest unit of the Texas Department of Criminal Justice (TDCJ) is officially the Allred Unit in Iowa Park, Texas. With an estimated 5,438 acres of land, the Allred Unit is the largest unit in the TDCJ system.
Other large units include the Estelle Unit in Huntsville (3,854 acres) and the Michael Unit in Tennessee Colony (3,403 acres). These three units are the biggest of the 109 TDCJ-operated units in the state of Texas.
The Allred Unit houses inmates involved in work, academic, vocational, and treatment programs. Additionally, the unit has a three-story infirmary, a multi-level security dormitory housing unit, a food preparation and distribution center, and two administrative office buildings.
The TDCJ system has grown by nearly 1000% over the past 30 years, rising to over 149,000 inmates in the state of Texas. While Allred is the biggest unit of the 109 operated by the TDCJ, it is not the most populated.
The McConnell Unit in Beeville holds the distinction of being the most populous of the TDCJ-operated units, with an estimated 9,410 inmates.
What kind of prisoners are kept at the maximum security section?
Maximum security prisons are designed to protect the public from dangerous and/or violent prisoners. These prisoners are typically those who have committed serious offenses, including violent crimes such as murder, kidnapping and armed robbery, as well as those who have escaped from other penal facilities.
These prisoners may also include those labeled as “maximum security risks” by the justice system, individuals who are considered high risk for flight, those judged to be dangerous, or those deemed to pose a threat to others.
Most prisons are organized into various levels of security, such as minimum, medium, and maximum. Maximum security prisoners are housed in a section of the prison designed with numerous safety precautions and security measures.
Facilities typically have multiple layers of fencing, motion detectors, video surveillance, and guard towers. Staff are usually well-trained and equipped with the necessary resources to handle dangerous and potentially violent situations at the prison.
What is a supermax unit?
A supermax unit, also known as a super-maximum security unit or an administrative-maximum unit, is a type of prison or correctional facility that houses inmates who are considered to be the most dangerous and/or require the highest level of security.
These units typically have a very high staff-to-inmate ratio and include enhanced security features such as restricted movement, controlled access, and greater scrutiny of visitors. Inmates typically spend their time in their cells 23 hours a day and are allowed out for one hour of exercise each day.
Visitation is often more restricted than in traditional prison settings and inmates are usually prevented from speaking with other inmates. Supermax units are seen as the last resort when other correctional strategies have failed.
While some argue that supermax units help protect inmates and prison staff from violence, others believe that the prolonged solitary confinement imposed on inmates can lead to serious psychological problems.
What is a maximum security level?
Maximum security level is the highest level of security applied to a facility or to protect individuals or information from theft, assault, vandalism, and other potential threats. It is typically applied to situations or objects that experience or contain highly sensitive or valuable information, or present a high level of risk and danger.
At its most basic level, maximum security may require physical measures such as locks, bars, and doors to restrict the movement of those unauthorized to enter an area or to gain access to confidential information.
Additionally, more extensive measures may include guards, surveillance cameras, and alarm systems. Maximum security solutions may also include more sophisticated measures such as biometrics (fingerprint or retinal scanning) to verify individuals’ identities and permissions to access sensitive information or certain areas.
Regarding facilities, maximum security levels may apply for prisons, military or government buildings, or laboratories. In some cases, secure transport such as armored cars is also needed to protect valuable goods or individuals in transit.
In the business world, maximum security may also refer to the highest level of encryption software available to protect sensitive data.
Overall, maximum security is designed to provide the highest levels of protection against theft, assault, sabotage, and other potential threats.
What division is maximum security in Cook County Jail?
The maximum security division of Cook County Jail is Division 10. It is located in the main building of the Cook County Jail complex located at 2700 S. California Avenue in Chicago, Illinois. It is one of the largest single-site county jails in the country and holds over 8,000 inmates on any given day.
Division 10 is the most secure and heavily monitored of the 11 divisions within the complex. Security measures in place include an advanced security system that requires every inmate to wear an individualized ID badge and to be scanned entering and exiting any of the divisions, as well as two layers of steel-barred security doors throughout the building.
The area is guarded 24 hours a day and is equipped with state-of-the-art surveillance technology. Inmates are held in single or double cells, each equipped with its own sanitary and toilet facilities.
There is also a dedicated medical facility at Division 10 where inmates can receive medical care if needed or during confinement.
What TDCJ units are closing?
The Texas Department of Criminal Justice (TDCJ) has announced plans to close several of its prison units due to budget cuts and a decrease in the inmate population. The units that are slated to close are Ferguson Unit, Cleveland Unit, Fort Stockton Unit, Bradshaw Unit, Mineral Wells Pre-Release Unit, and Allred Unit.
The closure of these six units is expected to save the TDCJ an estimated $67 million.
The TDCJ also announced plans to relocate inmates from the closing units to various other facilities, with some facilities receiving as few as two inmates and others receiving as many as several hundred.
In addition to transferring inmates, the TDCJ plans to transfer certain staff to other prisons in order to prevent layoffs. This includes transferring security personnel, medical staff, food service personnel, and other support staff.
The TDCJ has not yet announced the exact date of the closures, but they have stated that they plan to close the units by the end of the current fiscal year. Consequently, the closures are expected to take place between September 1, 2019 and August 31, 2020.
What does f1 2 mean in TDCJ?
F1 2 in TDCJ stands for “First Offender-Two Year Sentence”, referring to the length and type of criminal sentence a person has been given. It is a criminal justice term used in the Texas Department of Criminal Justice, which is the agency responsible for the state’s corrections operations, including parole and probation.
This type of sentence is usually given to offenders found to be guilty of a crime but who have no previous criminal record. First offenders are usually given proportionally short sentences and are supervised closely by the correctional authority.
In practice, this means that the offender stays in prison for two years, and then comes out under the supervision of a parole officer for the remainder of the term. The offender must also adhere to certain conditions of parole during this time and must not violate any of these conditions if they wish to avoid having their sentence extended.
In most cases, if a first-offender successfully completes the two-year sentence as well as the parole term, the crime itself will be erased from the public record, thus protecting their future opportunities.
What is a transfer facility in TDCJ?
A transfer facility in the Texas Department of Criminal Justice (TDCJ) is a facility deemed by the Correctional Institutions Division to be capable of holding inmates for no more than 30 days prior to their being transferred to other TDCJ facilities, or to other jurisdictions, as part of the “Bulk Transfer Program”.
Transfer facilities are usually larger and typically more secure than traditional TDCJ facilities, and local jails. They provide a common point for the Texas Department of Criminal Justice to bring in and process inmates transferring to a new facility or jurisdiction.
Transfer facilities include the Powledge Unit in Palestine, the Connally Unit in Kenedy, and the Joe F. Gurney Transfer Facility in Anderson County.
Is J Middleton a transfer facility?
No, J Middleton is not a transfer facility. It is a logistics and transportation company. The primary focus of the company is to provide reliable, cost-effective transportation, warehousing, and logistics services for businesses across the US.
Their services include truckload, less-than-truckload, local and regional delivery, warehousing and distribution, full-scale logistics services, and other related services. All of their services are designed to meet the needs of their customers and provide a cost-effective solution.
They also specialize in customized supply chain needs, such as just-in-time delivery and returns management.
Where are TDCJ inmates released?
Texas Department of Criminal Justice (TDCJ) inmates are released from several different facilities throughout the state. All inmates follow a discharge process that includes an evaluation of the inmate’s home plan, housing, employment, and supervision plan prior to release.
After serving their time in a TDCJ facility, inmates are released either through direct parole or through a halfway house.
Direct parole means that an inmate is released directly from custody without being transferred to another facility, such as a halfway house. Prior to release, parole officers often contact family members, co-workers, and other supervisors of the inmate’s prospective home or employment to discuss the inmate’s home plan, housing and supervision plan.
The parole officer also informs the inmate of his or her parole conditions, including curfews, travel restrictions, drug testing, and reporting requirements.
In some cases, inmates may be released from a TDCJ facility to a halfway house, which provides a transitional period before release back into the community. Halfway houses provide programs and services to promote successful re-entry into the community, such as substance abuse treatment, counseling, and employment assistance.
They also provide work opportunities and community service activities and help with the development of a parole plan.
Inmates must comply with the conditions of parole or community supervision, including reporting to their parole officers, complying with a curfew, obtaining permission to travel outside their geographic area, and maintaining employment.
Failure to comply with parole conditions can result in a parole violation, and a return to a TDCJ facility.
How long does it take to be released from TDCJ?
It depends on when an inmate’s release date arrives and what factors, if any, may hinder the release. Generally, an inmate must serve their entire sentence, meaning the sentence length established by their judge upon sentencing.
Having certain conditions, such as community supervision or parole, in place can also affect release dates.
Inmates may receive sentence reductions or parole for good behavior, worktime credit, participating in programs, or being accepted into a specialty court program. Depending on the situation, the time frame for release can be shorter or longer than the actual sentence.
At the Texas Department of Criminal Justice (TDCJ), the regular release process begins approximately two days prior to their discharge date. This is when the inmate is referred to the Institutional Parole Officer (IPO) and their eligibility for early release through parole or mandatory supervision is determined.
It usually takes up to two days to process the information, make sure all criteria are met, and prepare the documents needed for release.
Once this is complete, the inmate is transported to the closest parole office where they will be assigned an assigned Parole Officer and approved for release. The release process from TDCJ can take anywhere from two days to four weeks depending on the circumstances.
How do you find out when an inmate will be released in Texas?
If you are looking to find out when an inmate in Texas will be released, a good place to start is the Texas Department of Criminal Justice website. You can look up information on inmates by searching their last name, state ID, or TDCJ number.
Once you have found the inmate you are looking for, you can click on the “Offender Release Status” page of their profile, which will list their projected release date. This information is updated periodically, so it is important to keep checking regularly.
You can also contact the prison facility directly to confirm an inmate’s release date. Additionally, in some counties, you may be able to access information about an inmate’s release date from the county Sheriff’s website.
Additionally, if you are a family member or the attorney for someone incarcerated in the Texas Department of Criminal Justice, you can contact their Parole Officer for more information about their release date.
