Victaulic fittings are engineered with a specific pressure class rating designed to meet the demands of each building application. Rated pressure classes are determined by pipe size, temperature and pressure.
Victaulic fittings are available in a variety of pressure ratings to meet variety of industry standards, including ANSI/ASME B31. 1, ANSI/ASME B31. 3, ASTM A-53, ASTM A-135, ASTM A-795 and FM Code.
The pressure rating for Victaulic fittings can range from Low Pressure (LP), Medium Pressure (MP) and High Pressure (HP) depending on the size, temperature and pressure of the desired application. For example, for a Victaulic grooved joint pipe ranging in sizes of 2 – 6 inch, the LP pressure rating is 175 psi / 1207 kPa, the MP pressure rating is 350 psi / 2413 kPa, and the HP pressure rating is 1000 psi / 6894 kPa.
It is important to note that the pressure ratings of Victaulic fittings may vary depending on the specific fitting being used, the application in which it is being used and the pressure class. Therefore, it is important that the correct pressure rating is selected to ensure the Victaulic fittings are able to withstand the desired application pressure.
As such, it is important to consult with a Victaulic representative when selecting Victaulic fittings to ensure you select the correct pressure rated connection.
Table of Contents
Can you use Victaulic on compressed air?
Yes, you can use Victaulic on compressed air. Victaulic is a piping system that uses a special system of bolts and grooves to interlock pipes and fittings, allowing for the transfer of fluids and gases such as steam and compressed air.
It has been used extensively in many industries for many years and is highly valued for its high pressure ratings and quick and easy installation. Victaulic products feature innovative designs such as flexible couplings, valves, and fittings that enable air and other gases to be safely transported at varying pressure levels.
The use of Victaulic in compressed air systems allows for much greater control over air pressure levels and more efficient utilization of space in a compressed air system, making it an ideal choice.
Do Victaulic fittings leak?
Victaulic fittings are designed so as not to leak. They are mechanical couplings with self-forming grooves that provide secure connections by eliminating the need for gaskets, threading, and welds. Victaulic fittings are produced with precision and engineered for secure connections that resist leaking.
Victaulic fittings are certified to industry standards and are tested for several burst pressures and temperature cycles to ensure they are safe. They are also tested for vibration, tension, and endurance.
Therefore, in most cases, Victaulic fittings do not leak. However, proper installation and system maintenance are necessary to ensure they are air and gas tight and that they properly resist any potential leaks or pressure drops, so it is imperative to understand the best practices for proper installation, usage, and maintenance of the fitting to ensure a leak-free system.
Is Victaulic rated for steam?
Yes, Victaulic products are designed to be used in a variety of steam applications. Victaulic offers a full line of products for steam, including piping components, fittings, and valves. Victaulic products are designed for efficient, safe, and reliable coupling of piping in steam systems.
The products are engineered specifically for use with steam, and meet industry standards of pressure and temperature ratings. Victaulic products also have the ability to withstand high vibration and shock without compromising their integrity.
Victaulic products are designed with tight joints, which provide exceptional consistency in steam system operation. Additionally, the properties of the materials used in Victaulic products are optimized to reduce the impact of thermal shock and provide superior system performance and longevity.
What is IPS Victaulic?
IPS Victaulic is a pipe joining system that is designed for use in industrial piping applications. This system uses a patented “grooved method” of joining pipe together without having to weld or use flanges.
This method utilizes a split-sleeve that is mechanically fastened onto the outside of the pipe, and a gasket to create a secure, reliable seal. The Victaulic system is designed for use on both wet and dry systems and can accommodate a wide range of temperatures.
It provides a leak-proof alternative for joining pipes instead of using traditional welding and flanging. The system is also designed to reduce installation time and labor costs and comes in both rigid and flexible styles.
Additionally, it requires little maintenance due to its corrosion resistant properties. Ultimately, the Victaulic system provides an efficient way to join pipes of varying sizes and materials, while also reducing labor costs.
What are Victaulic couplings used for?
Victaulic couplings are often used in commercial construction, fire protection, and HVAC piping systems, among other industrial applications. These couplings are quick-connect fittings that allow pipes to be connected and disconnected with minimal tools and labor.
Victaulic couplings are designed to connect quickly and effectively and provide the necessary reliability and security for pipes carrying fluids, steam, gases, and solids. They are widely used in plumbing, industrial piping, fire protection, and HVAC systems.
Victaulic couplings offer several advantages over other types of pipe fittings, such as their fast and easy installation, simple setup, and long life. They are very secure and are often used to join pipes when high vibration and shock loads are expected.
Victaulic couplings are also used in the protection of water lines and plumbing lines from damage due to seismic events or improper construction. In addition, Victaulic couplings are often used to join metal pipes, plastic pipes, and other materials, providing a secure connection and allowing for more creative piping configurations.
What is the difference between Victaulic 920 and 920N?
The Victaulic 920 and 920N are two different types of couplings used in mechanical piping systems. Both couplings are made to provide a secure, leak-proof connection between two adjoining pipes. The main difference between these two couplings is the type of internal locking grooves they use to secure a connection.
The Victaulic 920 has two symmetrical O-ring grooves, while the Victaulic 920N has a single non-symmetrical groove.
The Victaulic 920 provides a stronger connection than the 920N, since the two symmetrical grooves indent into each adjoining pipe and sit directly next to each other. With the 920N, the single groove requires a thinner cut out of the pipe in order to fit a single groove into the cut out.
This can lead to a weaker connection than what is provided with the 920.
Additionally, the Victaulic 920 is available in larger sizes than the 920N. Therefore, the Victaulic 920 is often the preferred option for larger piping systems, as its thicker grooves provide a stronger connection.
However, for smaller pipes, the Victaulic 920N is usually the preferred option due to its thinner, single groove.
What is not advisable when using compressed air?
It is important to exercise caution when using compressed air. The following are some things that are not advisable when using compressed air:
– Never point the air nozzle at yourself or others – the high pressure air stream can cause injury.
– Never use compressed air to clean your skin or any part of your body – the pressure of the air can cause serious injury.
– Never use compressed air to clean dust or debris from your eyes – the air stream can cause serious injury including blindness.
– Never use compressed air to clean delicate objects like expensive jewelry – the pressure of the air may damage the object.
– Never use a pressure level greater than 30 PSI unless the air nozzle is designed to handle higher pressures.
– Never modify the air nozzle or alter the regulator settings – these modifications may lead to an unsafe condition.
– Never use plastic or rubber tubing to extend the reach of the air nozzle – this can cause an explosion which can cause significant property damage and bodily harm.
– Never use compressed air to clean up combustible materials – the pressure of the air can cause explosions.
What kind of pipe do you use for compressed air?
When selecting a pipe for compressed air systems, you need to consider factors such as pressure rating, corrosion resistance, temperature, chemical resistance, and type of application. Galvanized steel pipe, and ductile iron pipe.
Black steel pipe is typically used in applications where the air pressure does not exceed 150psi. Galvanized steel pipe is more resistant to corrosion and is a better choice in applications where the air pressure exceeds 150psi.
Ductile iron pipe is even more resistant to corrosion than galvanized steel pipe and is the best choice for applications where the air pressure exceeds 150psi. It should, however, be noted that ductile iron pipe is more expensive than black steel or galvanized steel pipe.
All pipes must be sized and selected according to the system pressure, flow rate, and types of joints used. Pipes also must be welded and sealed properly.
Can Press fittings be used on compressed air?
Yes, press fittings can be used with compressed air. The press fitting system is the most common pipe joining method used in compressed air systems. This system allows for repeatable, secure and fast assembly of pipe joints without the use of additional sealant or thread tape.
Press fittings are also easy to install and require minimal special tools. They are reliable when the assembly is done properly and can withstand higher operating pressures than threaded fittings. When it comes to compressed air, press fittings can be used with aluminum, brass, and stainless steel pipe.
However, it is important to ensure that the correct press tool is used and that the fittings are regularly inspected to preserve the integrity of the system.
What should be done to a grooved pipe before you install the Victaulic clamp?
Before installing a Victaulic clamp onto a grooved pipe, it is necessary to clean and inspect the pipe and all components of the clamp. First, any debris should be cleared away from the groove and the outside of the pipe.
Next, inspect the pipe and the clamp for any defects or damage and replace any components if necessary. Then, the clamp should be placed in position over the grooved end of the pipe and the pipe should be gently tapped with a rubber mallet if it is needed to ensure a snug fit.
Finally, a lubricant should be applied to the external surfaces of the clamp and within the grooves to ensure a good seal.
Is Victaulic a mechanical joint?
Yes, Victaulic is a mechanical joint. It is a type of grooved fitting used to join pipes together in a system, such as for plumbing and irrigation systems. It was invented in 1925 by Victor von Ingersleben, and the name “Victaulic” is derived from his name.
Victaulic mechanical joints are unique from other mechanical joint types because they connect two different pipes without a welding process. This allows pipes to be connected quickly and easily, instead of requiring welders and specialized equipment.
Instead of welding, Victaulic joints use a type of coupler that grabs the grooves of the pipes, creating a mechanical connection. They are designed to prevent leakage, and can handle temperatures and pressures up to 1000psi.
Victaulic is the leading manufacturer of mechanical piping systems, and their products are used in hundreds of applications around the world.
How does Victaulic work?
Victaulic is a type of mechanical coupling used to join pipes and fittings, created by the Victaulic company. The Victaulic system works by utilizing a special type of coupling-grip joint, which is a combination of a grooved mechanical joint and a sealing element.
This combination creates a secure connection that is both air-tight and water-tight, providing a secure and long-term joint for both metal and plastic piping.
The Victaulic coupling-grip joint works by first cutting grooves into the ends of the pipes and fittings. These grooves are then fitted with an elastomeric gasket, which is then tightened with a specialized tool called a “crimping tool”.
This crimping tool pushes the gasket material into the grooves as it tightens, creating a seal that tightly binds the two pipes together without providing any crevices or openings for gases or liquids to escape.
Victaulic is a commonly used solution in the fire safety industry, where the combination of a secure join and the ability to quickly attach additional sections of piping are both crucial for quelling any fires that may occur.
Victaulic is also a popular choice for other industrial applications such as clean rooms, food-processing plants and corrosive fluid-handling applications, due to its reliability and ability to provide a secure connection.
As compared to welding and other traditional joining methods, the Victaulic system provides greater reliability, cost savings, and it can be quickly taken apart and re-attached with minimal effort.
How did Victaulic get its name?
Victaulic is a leader in mechanical pipe joining systems and is one of the most recognized and trusted brands in the industry. The company was founded in 1919 in Easton, Pennsylvania by George Kress, who named the company after his son, Victor Kress.
At the time, the company manufactured valves, stands and parts for motor vehicles and wrenches to assemble them.
Victor was an engineer and tinkerer, and he was the driving force behind the inventions that made Victaulic the successful company it is today. In 1925, he invented a new way to join pipes that offered an alternative to standard methods like flanged, welded, or threaded connections.
This revolutionary system allowed for flexible yet reliable pipe joining, and with Victor’s invention, Victaulic became an industry leader.
Victor’s innovation continues to influence Victaulic’s products. The company has become the go-to resource for pipe joining solutions in a variety of industries, offering products for everything from oil and gas to plumbing and fire protection systems.
Every day, Victaulic products are used to safely and effectively join pipes in commercial and residential buildings all over the world.
Who invented Victaulic?
Victaulic was founded in 1921 by engineer Edward E. Kirkpatrick in Easton, Pennsylvania. Kirkpatrick sought to create a new kind of metal pipe joint, one that did not require solder or welding. Thus he developed the earliest versions of what are now known as grooved-end pipe fittings and couplings, a technology that revolutionized the way fire sprinkler systems, industrial HVAC systems, and other piping installations are designed and employed.
Kirkpatrick went on to file several other patents and create other subsidiary companies related to Victaulic over the following decades. The company continues to innovate and develop new technologies within the field of pipe fittings, making Victaulic a household name and essential player in the plumbing and construction industries.
