The cost of a Bath Fitter conversion from tub to shower will depend on many factors, such as the size of the existing space, the strength and condition of the walls, the type of materials being used, and the complexity of the job.
Generally, a basic installation of a Bath Fitter shower system can cost anywhere between around $3,000 and $5,000. This cost can be higher if additional customizations or upgrades are made to the system, such as a heated towel rack, a hand shower, or a built-in bench.
When taking into consideration all of the factors, the average cost of a Bath Fitter conversion from a tub to a shower is approximately $4,500.
Table of Contents
Is it worth it to convert tub to shower?
It depends on your lifestyle and preferences, as well as whether you have the resources to make the conversion. If you use the tub regularly for bathing, and you have the financial and physical resources, it may be worth it to convert your tub to a shower.
Showers are much more convenient and efficient when bathing, and they often use up less water than a tub. They also open up the potential for more creative design options and easier cleaning. On the other hand, if you aren’t someone who uses the tub often and you wouldn’t take advantage of the design possibilities or water conservation benefits, then it may not be worth converting your tub to a shower.
Ultimately, it is up to you to decide if the conversion is worth it.
Is it cheaper to replace tub or convert to shower?
When it comes to deciding whether to replace a bathtub or convert it to a shower, there are a few factors that need to be considered: cost, time, and the existing plumbing setup in the bathroom. Replacing a bathtub is typically more expensive than converting a bathtub to a shower.
However, the amount of time required depends on the type of tub and style of shower desired. If the existing plumbing setup is adequate for a shower, the conversion process generally involves replacing the tub with a shower base, adding a shower valve, a shower head, and shower doors or a shower curtain.
Additionally, any necessary wall and floor tile, wallboard, and other fixtures will need to be replaced. On the other hand, replacing the bathtub almost always requires replacing the existing plumbing due to the larger drain and water supply lines needed, as well as replacing any necessary wall and floor tile, wallboard, and other fixtures.
Depending on the situation, conversions may take one to five days while a replacement may take four to fourteen days. Ultimately, the decision should be based on practical considerations and the budget available.
Does converting tub to shower hurt resale value?
It generally depends on the market, home type, and the extent of the renovation. It likely won’t negatively impact the overall value of the home; however, converting a tub to a shower may not bring a return on investment.
While a tub to shower conversion could offer more convenience, some buyers may still prefer a remodeled tub/shower combo.
If you’re hoping to get a return on investment out of the conversion, a full bathroom remodel may be beneficial. When done right, a full bathroom remodel or upgrade would potentially increase the resale value and make it easier to list the house in the future.
Other features that could be considered when renovating a bathroom include heated floors, high-end tile, and upgraded water fixtures.
When considering a tub to shower conversion for resale value, it’s important to take into account the needs of potential buyers. A well-designed shower can certainly be appealing; however, depending on the market, some home buyers may still want a tub.
It’s important to consider potential buyers’ opinions and interests before making any decisions.
How long does bath fitter last?
The durability and longevity of a bath fitter will depend on how often it is used and how well it is maintained. Generally speaking, a bath fitter will last anywhere from 10-25 years if it is given regular care and maintenance.
With the right maintenance practices, such as replacing the seals and components when needed, the bath fitter can last even longer. Additionally, using a high-quality material when constructing the bath fitter can increase its lifespan.
As always, it’s important to consult a contractor for the best recommendations on product construction and maintenance practices with regards to bath fitters.
Does Bath Fitter remove old tub?
Yes, Bath Fitter does remove old tubs. As part of the Bath Fitter process, a qualified team will come to your home to precisely measure your current bathroom and determine the best solution for your needs.
They will then carefully remove the old tub and replace it with a customized Bath Fitter product that is designed to fit the exact space and application. This custom product is crafted with eco-friendly materials, and the installation is completed in as little as one day while avoiding the hassle of a full renovation.
Is BathFitters guaranteed for life?
Yes, BathFitter products are guaranteed for life. The company stands behind the quality of its products and offers a lifetime warranty on all materials, labor, and installation. This means that customers are not responsible for any repair or replacement costs related to the products or installation, as long as the damage was not caused by customer negligence.
As part of the guarantee, customers are given the option of free repair or replacement if the product fails to perform due to defects in material or workmanship. In addition, some products come with a more comprehensive lifetime limited warranty that provides repair or replacement services even if damage is caused through customer negligence.
What is the alternative to Bath Fitter?
The alternative to Bath Fitter is traditional bathroom renovation. This can be done by either hiring a contractor or DIY-ing the project. DIY-ing will require some time, tooling and materials, but can be very budget friendly.
It includes steps such as removing the existing fixtures, creating a design plan for the new configuration, ordering new fixtures that fit the space, and then installing all the pieces. Alternatively, a contractor can come in, assess the space, work with you to develop a plan, order the supplies, handle the plumbing, and professionally install the new features.
Both of these options will generally take more time to complete and cost more than a Bath Fitter solution but can provide the desired amount of customization and streamline the installation process.
How often does a bath need resealing?
Generally speaking, a bath should be resealed every 12 to 18 months to help keep it free from mould, mildew, and discolorisation. That said, this timeframe can vary depending on the type of sealant used and the product’s quality.
The best way to determine when your bath needs to be resealed is to check regularly for any signs of mould or mildew, and if any is spotted, reseal the bath immediately. The resealing process can be completed fairly quickly and easily with the help of a bath sealant, which can be purchased from most major hardware retailers.
It is important to follow the instructions for the sealant carefully in order to properly reseal and protect against water damage.
Does Bath Fitter go over existing tile?
Yes, Bath Fitter can go over your existing tile. With their innovative technology, they specialize in installations that involve overlaying the existing surface. This means they can install their customized wall systems, shower bases and tubs on top of existing tile, which eliminates the need for messy and expensive demolition of the existing tile surface.
With this process, you can maintain the same tile look without having to actually remove and replace the tile. Furthermore, a unique blend of materials is used to ensure a long-lasting and secure seal to provide a worry-free installation for years to come.
How much does it cost to Recaulk a bathtub?
The cost to recaulk a bathtub can vary greatly depending on the type of caulking material used, the complexity of the job, and the labor rate of the professional you hire to do it. Generally speaking, a standard recaulking job takes about two to four hours to complete and can cost anywhere from $150 to $500.
For a high-end recaulking job using specialized materials and professional services, that can rise to more than $1,000. If you choose to do the recaulking yourself, you can save a lot of money, but you will need to buy the necessary materials and follow the instructions very carefully.
It’s usually wise to spend the extra money and hire a professional to do it right.
Can I reseal my bath myself?
Yes, you can reseal your bath yourself, but there are some things that you should consider before doing so. First and foremost, you should make sure that you have the right tools and materials for the job.
Without the right tools and materials, it is difficult or impossible to achieve the desired sealing results. Make sure you have a caulking gun, a quality silicon sealant, a putty knife, a damp cloth and a caulk cleaner.
Additionally, you should have a steady hand and some patience to carry out the job.
If you are confident that you have everything you need, you should start the process by removing the existing sealant to create a clean surface. Do this by using a putty knife and be sure to get as much of the existing sealant out as possible.
Then, use a damp cloth to wipe down the area to get rid of any dust and debris. Next, use a caulk cleaner to make sure the area is free from dirt and grime for better adhesion.
Once you have created a clean surface with no grit, you can start applying the sealant. Cut the nozzle of the silicon sealant to the desired size and start squeezing it into the gap between the bath and the surrounding area.
Try to create a nice and even sealant line and make sure there are no gaps or air bubbles. Once finished, allow the sealant to dry and cure before using your bath.
How often should you caulk tub?
It is recommended to caulk around a tub once a year for optimal protection against water damage. During this annual checkup, you should look for any signs of cracking or peeling in the existing seal and make sure there are not any gaps or gaps that need to be filled.
If the caulk is showing signs of wear, you should replace it to replace the expiring seal. When applying the caulk, make sure to use a mildew-resistant caulk in order to prevent harmful bacteria or mold growth.
Additionally, make sure to use a damp cloth to clean the area around the tub before applying the caulk and to smooth the caulk into a curve when applying it. This will ensure a more secure and effective seal.
What is the difference between Re-Bath and Bath Fitter?
Re-Bath and Bath Fitter are both companies that provide bath remodeling services, but there are some key differences. Re-Bath provides a wide range of services, from tub and shower replacements to wall surrounds to ADA-compliant upgrades to complete bathroom remodels.
Bath Fitter focuses on tub and shower replacements, offering acrylic wall surrounds and custom-fitted bath and shower liners that fit over existing fixtures. Re-Bath products are manufactured in the USA using durable, high-quality materials, while Bath Fitter products are made in Canada.
Re-Bath provides an industry-leading lifetime warranty on its products, while Bath Fitter offers warranties lasting up to 10 years. Finally, Re-Bath requires an in-home consultation by an experienced professional with a design proposal, while Bath Fitter provides an online virtual design tool and consultation and does not require a home visit.
What can I use to cover my bathtub?
To cover your bathtub, there are a variety of materials you can use. Some of the most popular options include tile, vinyl, and acrylic. Tile is a great option, as there are a variety of colors, sizes, and shapes available, so you can mix and match to create a unique and attractive design.
Vinyl is another great option, as it is more affordable than tile, but still creates a finished look. Lastly, acrylic is a popular choice, as it is durable, waterproof, and easy to clean. All of these materials are available at most home improvement stores for relatively low prices and easy installation.
