Unfortunately, the iPhone 12 is not waterproof or water-resistant and should not be put underwater. Even with all the advancements in modern technology, it is still not advisable to submerge electronic devices in water, as it can cause lasting damage.
Doing so can potentially create short-circuits in the device, causing it to permanently malfunction. In severe cases, the iPhone 12 could be completely destroyed and rendered unusable.
It is important to note that placing your iPhone 12 even in shallow water such as a sink or puddle can also cause lasting damage and should be avoided. Even if the phone appears to be working, the internal circuit and other components could sustain long-term damage and stop working once the phone is dried out.
In short, unless your iPhone 12 is designed to be waterproof, it is best to keep it away from water and moisture.
Table of Contents
Can the iPhone 12 survive underwater?
No, the iPhone 12 is not designed to withstand water or any other liquids, so submerging it in water is not recommended. The iPhone 12 is rated with an IP68 water-resistance rating, which means it is protected from the occasional splash of water and can withstand a certain amount of water pressure.
However, immersion beyond the specified IP68 standard can damage the device and invalidate the warranty. If your iPhone 12 does get wet, it is best to dry it off as soon as possible with a lint-free cloth and to avoid charging it until it is completely dry.
Can you take your iPhone underwater to take pictures?
No, you should not take your iPhone underwater to take pictures. While the majority of modern iPhones are designed to be water-resistant and can handle splashes and light rain, they aren’t designed to be fully submerged.
iPhones have a water-resistance rating of IP67, which means they can handle being submerged in one meter or three feet of water for up to 30 minutes, but beyond that is not recommended. Additionally, the water-resistance of iPhones can deteriorate over time and is affected by small debris such as sand and dirt, so risks of damage to the device increase with regular exposure to the water.
Waterproof cases are the best and most reliable way to protect your device while taking pictures underwater.
Can a iPhone 12 go in a pool?
No, a iPhone 12 should not be taken into a pool. The iPhone 12 is not designed to be water-resistant or waterproof. Water damage caused by intentional or accidental exposure to liquid can be expensive and difficult to repair.
Additionally, water damage could cause permanent internal damage and reduce the life expectancy of your iPhone 12. If you must take your iPhone into a pool area, it is best to keep it away from any direct contact with water and cover it with a waterproof case.
Should I put my iPhone 12 in the pool?
No, you should not put your iPhone 12 in the pool. Water and electronics do not mix, and iPhones are not waterproof. Water can cause irreversible damage to iPhone 12 internals, which means that putting it in the pool can completely ruin it.
Even if the iPhone is rated for water resistance, it does not mean that it is safe to be submerged in the pool for extended periods of time. Furthermore, if you drop your iPhone 12 in the pool, it can be hard to retrieve it if you don’t have the right equipment to do so.
Additionally, pool water contains chemicals, so your phone can be damaged by these as well. For these reasons, it is best to keep your iPhone 12 safe from pools and other bodies of water.
How long should an iPhone 12 be in water?
The iPhone 12 should not be in water for any amount of time. Apple does not make any claims about water resistance for the iPhone 12, though it is splash, water and dust resistant. It is not recommended to submerge your iPhone 12 in water or any other liquid as liquid damage is not covered by the warranty.
Even if your iPhone 12 is under a warranty, any water damage can void the warranty. If your iPhone 12 has been submerged in water, it is best to power off the device and take it to an Apple Store or certified technician.
Which iPhone works underwater?
None of the iPhones currently works underwater. iPhones are not waterproof or designed to be taken underwater. Submersion in water or other liquids can cause irreparable damage. The iPhone is designed to be splash and water resistant, but not actually waterproof.
Although Apple advertises its iPhones as being water-resistant and lists specific water-resistance ratings for certain models, it does not guarantee that its products will be safe if submerged for a prolonged period of time.
Therefore, using an iPhone underwater is not recommended and may void the device’s warranty.
How long does it take for water to dry in iPhone 12?
It typically takes about 1-3 hours for water to dry in an iPhone 12. However, exact drying times can vary depending on factors such as how much water has come into contact with the phone, the air temperature, the humidity level, and how much time the device has been left out in open air.
If your iPhone 12 has been exposed to a significant amount of water, it is best to leave the device out in open air for at least 24 hours to allow the water to properly evaporate. It is also important to ensure the device is not exposed to direct heat sources, such as a heater, to prevent any further damage.
Additionally, checking for any visible water in the ports and avoiding any attempts to power on the phone, until it has been dried out, can help prevent any further damage.
How do I know if my iPhone 12 has water damage?
If your iPhone 12 has been exposed to water, you may be able to tell if it has water damage by looking for signs of corrosion or water inside the device. Visually inspecting the connectors and ports for any apparent signs of rusting or residue is a good place to start.
You can also check for a Liquid Contact Indicator (LCI) located inside the SIM tray slot which will change from a white to a pink or red if it has come into contact with water or another liquid. If the LCI has changed color, or if you can see signs of water or residue inside the device, then it is likely that it has water damage.
Testing the device to make sure that all the parts are functioning correctly is also a good way to check for water damage. If your device does have water damage, it is important to have it repaired as soon as possible to prevent further damage.
How do I dry my iPhone 12?
If your iPhone 12 has gotten wet, it’s important to dry it as soon as possible to avoid damage. First, turn your device off immediately and unplug any accessories that may still be connected. Then, use a soft, lint-free cloth to pat the iPhone dry, especially around any openings and ports.
Avoid rubbing the device too harshly because it may cause more damage. Do not use a hair dryer or any other heating device, as this may destroy the device. Once it is as dry as possible, place the iPhone in a container with uncooked rice.
The rice will absorb any remaining moisture from your device. It’s beneficial to leave the phone in the rice for at least 24 hours. Doing so will remove any last traces of moisture and help your device come back to life.
After that, take the iPhone out of the rice and set it on a metal cooling rack for a few hours if necessary. Finally, power on the device and see if it’s working properly. If it is not working or has serious damage, contact Apple Support or an authorized service provider for help.
Can Apple tell if iPhone has water damage?
Yes, Apple can tell if an iPhone has water damage. Its technicians visually inspect the iPhone and use a Liquid Contact Indicator (LCI) to detect if any water has come in contact with the device. The LCI is usually located in the headphone jack, charging port, and SIM card tray, and will become colored if moisture has been detected.
Apple technicians also use specialized software to detect any corrosion inside the device, which further indicates water damage. Ultimately, it’s up to Apple technicians to determine if a device has been damaged by water, and they can provide owners with an estimate for repair afterwards.
Where is the water damage indicator on my iPhone?
The water damage indicator on an iPhone can be found in the SIM card tray on the right side of the phone. The indicator will be a white or red dot next to the SIM card. If the dot is white, it means the device is not water damaged.
If the indicator is red, it means the device has damage from coming into contact with water. It is important to note that the water damage indicator does not always accurately reflect the amount of water that has come into contact with the device.
Water damage can occur even if the indicator does not read red, and can also occur if a device has not been submerged in liquid but has simply been exposed to high humidity. If the indicator is red, it is recommended to take the device to an Apple Store for a comprehensive water damage assessment.
What are signs of water damage on a phone?
Signs of water damage on a phone may include corrosion or discoloration on the phone’s exterior, visible condensation or discoloration between the glass and display, fogging of the camera lens, water stains around the edges of the phone or on the buttons, speaker malfunction, erratic touchscreen behavior, trouble connecting to cellular or Wi-Fi networks, echoes or static when speaking on calls, and loss of battery life.
Additionally, the phone may not power up or stay powered on or may shut off or restart on its own. Even if there isn’t visible damage, corrosion may occur inside the phone due to the presence of air and moisture.
It is important to act quickly to dry and repair the phone if any of these signs are found to prevent further water damage to the phone.
