The cost to re-felt a pool table will vary depending on factors such as the size of the pool table, the type of felt you are wanting to use, as well as how much labor is required to complete the task.
Generally speaking, it will usually cost between $100 – $400 to re-felt an average-sized pool table with a basic felt, with the price increasing to $200 – $500+ for more intricate felt patterns. The labor required will also add to the total cost, as the process of re-felting a pool table can vary greatly in difficulty depending on the specific table, and the quality of the felt used.
Additionally, if any repairs are needed to the table itself, the cost can increase significantly as well. As such, it is advisable to get multiple quotes from different pool table specialists to ensure you are getting the best value for your money.
Table of Contents
Is it hard to replace pool table felt?
Replacing pool table felt can be a difficult task, depending on the type of pool table you own and how much experience you have with DIY projects. The most important factor to consider when replacing your table felt is finding a replacement that is the same size as the existing cloth.
Measuring your pool table properly is essential in ensuring that you get the right size of replacement felt. Additionally, you’ll need to take into account factors such as the level of your pool table, elasticity, and accuracy when selecting the new felt.
In addition to selecting the proper size, it is also important to properly stretch and apply the new felt so that it lies flat and without any bubbles or wrinkles. To do this, you’ll likely need to use a heat gun and a special adhesive.
You may also find it necessary to use a roller to ensure that the felt is properly in place.
This entire process can take several hours or even days, depending on your experience level. If you’re not confident in taking on such a project, it may be a good idea to hire a professional to take care of the job.
How often should felt be replaced on pool table?
The frequency of felt replacement on a pool table depends largely on the amount of use the table receives. Generally, felt should be replaced every 1-3 years if the table is used regularly. If the table is only used occasionally, every 3-5 years may be suitable.
Additionally, felt should be changed sooner if it is showing signs of wear or if the cloth has become wrinkled or matted.
When replacing the felt, it is important to carefully clean the bed and rails of the pool table. A vacuum and brush should be used to clean any accumulated dust and debris, and any spots on the bed should be cleaned with a damp cloth.
If the table is old, it may need to be stripped and refinished before new felt can be added. Once the new felt is applied, pool balls should also be replaced due to the wear that has been caused over time.
Overall, the frequency at which felt should be replaced on a pool table depends on the amount of use and the condition of the felt. Keeping the bed and rails of the table clean in between replacements can help prolong the felt life, and replacing the balls frequently can help to avoid excessive wear.
How Long Does felt on a pool table last?
The lifespan of felt on a pool table depends heavily on many factors such as the type of felt, the amount of play, and the degree of maintenance it receives. As a general rule, pool table felt should be replaced every two to three years if it is not properly cared for or after heavy and frequent play.
Poor maintenance and improper cleaning and storing of the pool table can shorten its lifespan greatly.
High-grade wool cloth will last considerably longer than low-grade felt, as it’s more durable and water resistant. Professional pool tables tend to use woolen cloth, as it boasts a level of quality that generally lasts for up to 10 years even with frequent play.
On the other hand, nylon, woolen-blend, and cheap felt cloth tends to last from two to three years, depending on how the table has been treated and taken care of.
It’s important to ensure proper maintenance, frequent cleaning and a properly sealed table so that your felt lasts as long as possible; this involves checking the cloth for signs of wear, dusting the table with a dry cloth, and batting store dust balls every so often.
Make sure to once in a while check the leveling of the table, vacuum out the pockets and vacuum underneath your table as well. Applying a felt protector should also be done at least twice year to further preserve the cloth.
Can you vacuum the felt on a pool table?
Yes, you can vacuum the felt on a pool table, but it’s important to be very careful. Vacuuming is a great way to keep your pool table clean, but it can easily damage the felt if you’re not careful. Start by vacuuming the pool table with the soft brush attachment from the vacuum.
This will help pick up any debris that’s on the felt. You can also use a handheld vacuum to reach in between the cushions and the slate. Be sure to avoid the pockets, as the suction from the vacuum can cause damage to them.
Another option is to use a microfiber cloth or a vacuum suction pad for the corners, crevices, and sides. After vacuuming, you can use a pool table brush to remove any remaining dirt or debris. If you have any stubborn dirt spots, dampen the cloth with a small amount of water and spot clean the felt.
When you’re finished be sure to let the cloth dry completely before covering the table.
How do I know if my pool table felt needs replacing?
Checking if your pool table felt needs replacing can be done by inspecting it and seeing if it has any rips, tears, or holes. Charring or burning may also be present, and these are all signs that a replacement for your pool table felt is needed.
You can also see if there is any discoloration or reflective of pool table felt. If the felt is looking tired, flat, outworn or dull, then it is likely that your current felt needs to be replaced. Look for signs of damage caused by humidity, moisture, or direct sunlight, as these can also indicate that it’s time for a replacement.
Additionally, feel the surface of the felt to see if it’s soft, plush, or tacky. If it’s hard or has stiffened, then your pool table felt likely needs to be replaced, as it won’t be able to provide the necessary level of playability, accuracy and spin required for a good game.
Finally, if it’s been more than a few years since you’ve changed your pool table felt, consider replacing it to ensure a smooth and consistent gaming experience.
Can you move a pool table without removing the felt?
It is possible to move a pool table without removing the felt, although there is some risk of damage to the felt during the move. This can be prevented by taking extra care when handling the table. The table should be lifted from underneath, using the hand hole, so as to not cause any strain on the felt.
Ideally, four or more people should lift the table, one at each corner. Once the table is in the air, the felt can be protected with blankets or moving blankets. Once the table is in place, the felt should be checked for any rips or snags to ensure it is still in good condition.
Do you have to Refelt a pool table after moving it?
Yes, you should refelt a pool table after you move it. The slate of a pool table is especially susceptible to shifting when moved since it is so heavy. This can cause the pockets to become loose and the cushions to flatten out, completely throwing off the accuracy of the game.
When refelting a pool table, the process involves removing the old felt, cleaning the slate and railings, and then finally putting the new felt on the table. It helps to have someone with experience do this job, as it is a precise process that requires a delicate touch.
All in all, refelting a pool table after a move will ensure that your pool table continues to perform and play as it was intended.
