The exact cost of a Yamaha 200 will depend on the make and model, as well as where you choose to purchase it. Generally, Yamaha 200 models range in price from around $1000 to upwards of $6000. At the lower end of the spectrum are models such as the Yamaha YZF-R200, which retails for around $1000.
On the higher end, special edition models such as the Yamaha YXZ 1000R SS could cost upwards of $6000. A good middle-of-the-road option is the Yamaha XSR900, which has a retail price of around $4800.
Additionally, used Yamaha 200 models can often be found for cheaper prices.
Table of Contents
How much is a 200 Yamaha 4stroke?
The exact cost of a 200 Yamaha 4stroke will vary depending on specific features and packages, as well as dealer costs associated with the purchase. Generally, you can expect to pay around $14,000-$17,000 for a new 200 4stroke Yamaha outboard, depending on the model and options.
Packages can add significantly to the cost of motor. Be sure to check with multiple different dealers to get the best deal. Additionally, you may be able to find gently used or refurbished motors for a much lower price.
Your best bet is to shop around and compare specs and prices.
How fast will a Yamaha 200 outboard go?
The speed of a Yamaha 200 outboard will depend on the size of the boat it is mounted on, the weight added to the boat, and how many passengers are present. Generally speaking, a Yamaha 200 outboard has the capability of going up to 60 mph, however, the average top speed with a boat capacity of 4 people or less and minimal weight added is between 35 mph to 40 mph.
With the Yamaha 200 outboard, you can also expect to reach speeds of approximately 25 mph to 30 mph with a boat capacity of 5 people or more and other weight added, such as fishing gear.
How much horsepower does a Yamaha 200 have?
The Yamaha 200 horsepower outboard motor model has a rating of 200 horsepower at the prop shaft. This model also has a displacement of phasing 2. 6 liters, a two-cylinder configuration and can be fueled with either regular or premium unleaded gasoline.
An inline 4-cylinder model is also available that has 200 horsepower at the prop shaft, a 4. 2-liter displacement and the same fuel options. The Yamaha 200 horsepower outboard motor model is capable of propelling boats to a maximum speed of approximately 55 mph, depending on the weight and wind conditions.
Additionally, it has a built-in power trim and tilt system and Idle Air Control, which allows for improved engine performance and fuel economy. The Yamaha 200 has a total weight of 429 pounds, and the dimensions of the engine are 33 inches long, 24 inches wide and 34 inches high.
Which is a better outboard Mercury or Yamaha?
The answer to which is a better outboard motor, Mercury or Yamaha, is largely dependent on your boating needs and preferences. Both Mercury and Yamaha offer quality outboard motors that are reliable and powerful.
When it comes to performance and power, Mercury is the leader of the two, offering larger engines with higher outputs than Yamaha. In addition, some Mercury engines offer up to a 3-year warranty, while Yamaha typically offers a 1-year or 2-year warranty.
In terms of maintenance and service, Yamaha typically requires fewer tune-ups and repairs than Mercury, making it a bit easier to keep up. Yamaha also offers an array of digital technologies and technologies, such as the Yamaha Command Link that provide a more seamless boating experience.
Overall, both Mercury and Yamaha offer superior engines that can handle the rigors of boating. Ultimately the choice of which engine is the better choice depends on the boater’s intended use and needs.
If you need more power and performance, go with Mercury. If easier maintenance and operation are important, go with Yamaha.
What is Max RPM for Yamaha F200?
The maximum RPM for a Yamaha F200 is 6,000 RPM. The F200 is a four-stroke outboard motor designed by Yamaha. It is classified as a mid-range motor and is suitable for a variety of uses, including powering boats that transport up to nine passengers.
The F200 features many cutting-edge features, such as the Electronic Fuel Injection System (EFI), which enables more precise control of fuel delivery. It also has an optimized propeller and increased exhaust efficiency, resulting in more torque, better fuel economy, and reduced emissions.
Additionally, the F200 has outstanding reliability and durability, which allows it to consistently deliver great performance over extended periods of time. With its maximum RPM of 6,000, the F200 is a powerful and reliable outboard motor suitable for a variety of needs.
What is the price of 4 stroke engine?
The price of a 4-stroke engine can vary greatly depending on the make, model, size and power of the engine. Smaller engines intended for standard lawn mowers and other outdoor equipment may cost anywhere between $200 and $500, while larger, more powerful engines commonly used on boats and other recreational items may cost anywhere from $1,000 to $10,000 or more.
If you’re looking for a used 4-stroke engine, you may save up to 40 percent or more on the purchase price. Additionally, many 4-stroke engines require the purchase of additional parts such as an exhaust system and a spark plug, so you should factor these costs into your total budget.
Shopping around for the best deal is always a good idea.
How much is a new Suzuki 200?
The cost of a new Suzuki 200 will largely depend on a few factors, including the specific model, trim level, and accessories. On average, the price of a new Suzuki 200 is around $7,500, but may vary significantly depending on the features and options.
Generally, the cheapest you can expect to pay for a used Suzuki 200 is around $3,500, while the most expensive models go up to as much as $10,000. If you’re looking for a base model without any additional features, you can find them for around $7,000, while a fully loaded version with all the bells and whistles can cost upwards of $9,500.
As there are a number of different models to choose from, it’s important to shop around to ensure you get the best deal for your model.
What is a lot of hours on a Yamaha outboard?
The amount of hours you can expect to get out of Yamaha outboards depends on several factors, including the model, maintenance, and usage. Generally speaking, however, most Yamaha outboard motors can run between 3000 and 5000 hours before needing a major overhaul.
Within this range, the higher the quality of maintenance, the closer to 5000 hours you can expect to get out of a Yamaha outboard. Additionally, outboards used in saltwater will likely need to be serviced more often, as saltwater can corrode many of the motor components and increase the wear and tear on the motor over time.
Therefore, when used in saltwater, it is recommended to plan on servicing the outboard more often in order to preserve its life expectancy.
Is 200 hours on a boat a lot?
It really depends on what you are using the boat for. For recreational use, 200 hours is a significant amount of time, but not necessarily a lot. In recreational settings, boats typically see use ranging from 20-50 hours per season.
However, if you are using the boat for commercial applications or in a professional context, 200 hours may be considered a relatively low amount of usage. This is because professional boats are often used more regularly and for more intense operations.
Additionally, the amount of maintenance boats require will likely increase the more hours they are used, so heavier use typically requires more frequent servicing and maintenance. Ultimately, whether 200 hours on a boat is a lot or a little depends on how and why the boat is being used.
What year Yamaha outboards had problems?
Yamaha outboards have been around since the 1960s and have had a generally excellent track record. However, Yamaha outboard motors have had some issues over the years. In 2006, Yamaha recalled some F50 and F60 outboard motors when it was discovered that the crankshaft pin could slide out, leading to engine failure.
In 2014, Yamaha recalled their F9. 9A and T9. 9A outboard motors due to a potential oil system-related problem that could cause an engine malfunction. In 2015, Yamaha recalled their F90, F75, F60, and F50 outboard motors due to an issue with the drive shaft splines wearing out prematurely.
Additionally, in 2016, Yamaha issued a Service Bulletin on their F150, LF150, F175, F200, LF200, and F225 outboard motors for issues related to corrosion of the pistons, plug caps, and other related parts.
Although these are the only instances in which Yamaha outboards have had quality issues, the company has taken corrective steps each time and remains committed to providing reliable and safe products for its customers.
What is the most reliable 4 stroke outboard motor?
The most reliable 4 stroke outboard motor is likely the Yamaha F250. This award-winning motor has won numerous awards and helps fishermen and pleasure boaters alike reach their destinations time and time again without issue.
The F250 uses a Smooth-Shift Power-Shift system to ensure seamless and stable shifting, as well as Yamaha’s unique 5 carburetor design to help reduce emissions, increase fuel-efficiency, and offer more power.
Additionally, the F250 has excellent corrosion protection thanks to its inboard-like design and the choice of zinc, aluminum, or stainless steel construction. The oil tank is large, mounted high to minimize contamination and has a built-in oil reservoir monitor.
Finally, this motor has Yamaha’s patented Longsteer system that provides superior boat stability, superior high speed maneuverability and excellent turning performance even in tight situations. All of these features combine to make the Yamaha F250 one of the most reliable 4 stroke outboard motors on the market.
How many hours is a lot on a 4 stroke?
The amount of hours a 4-stroke engine can last can vary depending on a variety of factors, such as the type of engine, maintenance, quality of fuel and oil used, the environment in which it is operated, and the overall condition of the engine itself.
On average, a 4-stroke engine can last anywhere from 1,500 to 5,000 hours when properly maintained. However, some engines can last up to 10,000 hours or more depending on the quality of the machine, fuel and oil used, how often the oil has been changed, and other factors.
Depending on how often the engine is used and how well it is maintained, homeowners may be able to go many years or even decades before needing to replace the engine.
Are 4 stroke outboards reliable?
Yes, four stroke outboards are generally reliable. These engines come in a variety of sizes and power levels, and most manufacturers have a good reputation for creating durable and dependable outboards.
Since they are four-stroke engines, they don’t require as much maintenance as two-stroke engines and usually offer higher fuel efficiency and lower emissions. Many four-stroke outboards are now equipped with computer controlled ignition systems that make them more reliable than ever before.
They also come with several advanced features to help reduce emissions and increase fuel efficiency, like direct fuel injection and advanced oiling systems. Overall, four stroke outboards are highly reliable and a great choice for any boat.
