No, it is not necessary to use OxiClean every wash. OxiClean is a laundry additive designed to treat tough stains and boost the effectiveness of detergents, but it is not necessary to use it every time you do a load of laundry.
OxiClean is most effective when used to pre-soak heavily soiled clothes or when stains are present, so using it every wash is not necessarily beneficial. For regular loads, it is best to just use detergent without any additives.
The exception would be if you have particularly water-hard or extra dirty loads. In this case, a dose of OxiClean can help boost the effectiveness of your detergent by breaking down tough soils and penetrating fibers more easily.
Table of Contents
When should you not use OxiClean?
It is generally not recommended to use OxiClean on delicate or brightly-colored fabrics. It can also be damaging to certain types of materials, such as wool or silk, so it is safest to check the care label or test a small area of the fabric first.
Additionally, OxiClean contains chlorine, which can bleach or discolor certain fabrics. Therefore, it is important to use a different stain remover if the clothing item is not machine washable or not colorfast.
Likewise, if the fabric has optical brighteners or if the color is likely to fade, it is not recommended to use OxiClean. Additionally, it is not safe to use OxiClean on leather, silk, suede, flooring, jewelry, metal, upholstery, finishes, unpainted surfaces, or countertops.
How much OxiClean do you use per load?
The amount of OxiClean you use per load will depend on the instructions listed on the package. Generally, the amount should range from 1 scoop of OxiClean powder with 4 to 6 gallons of water (or fill the scoop to the MAX line with 1 Gallon of water).
It is recommended to pre-soak heavily soiled items for up to 6 hours to get the best results. For a normal cycle of washing, use 1 scoop of OxiClean powder for every 16lbs (or 1 full kup for 10lbs) of laundry.
If you’re looking for a deeper clean, use 2 scoops (or 2 cups) of OxiClean powder for every 16lbs of laundry. With OxiClean liquid detergent, use 1/4 cup for a regular load. For large or heavily soiled loads, use 1/2 cup.
If you’re looking for optimal stain cleaning, you may increase to 3/4 cup for a normal and full cup for a large load.
Does OxiClean work better than detergent?
It depends. OxiClean is an oxygen bleach that can help to lift dirt and stains from fabric and soften fabrics when used as a pre-treater or added to the washing machine during the wash cycle. Generally speaking, OxiClean has been found to work as an effective stain remover, although its true effectiveness depends on the type of fabric and the type of stain.
When it comes to cleaning power in comparison to traditional detergent, the effectiveness of OxiClean varies. For some fabrics and stains, OxiClean may be able to remove them more effectively than traditional detergents.
For example, OxiClean is most effective at removing stubborn, greasy stains from fabrics as compared to detergents.
On the other hand, traditional detergents are more effective at low temperatures and may be more thorough in cleaning for other types of fabrics and stains. Since OxiClean needs to be used at higher temperatures to be most effective, it isn’t always an ideal solution for those trying to conserve energy.
Ultimately, it is best to experiment with both detergent and OxiClean to see which one is more effective for your particular fabric and stain.
Can you use OxiClean and detergent together?
Yes, you can use OxiClean and detergent together. OxiClean is a versatile product that can be combined with other laundry products, including detergents, to give your laundry an extra boost of stain-fighting power.
To do so, simply add the OxiClean powder to the detergent dispenser of your washing machine along with the detergent and let the machine cycle through the cycle. If you do not have a washing machine, you can always dissolve the OxiClean powder in a bucket of warm water and add it to the laundry along with the detergent.
This method can be used when pre-treating particularly stubborn stains on clothing before washing.
Should you use hot or cold water with OxiClean?
When it comes to using OxiClean, the verdict is that either hot or cold water will get the job done. The temperature of the water isn’t as important as the temperature of the OxiClean solution itself.
Since OxiClean is an effective but gentle cleaning agent, it’s fine to use either hot or cold water. That said, some people prefer using hot water over cold because it helps dissolve the powder more effectively.
Hot water can also help remove stains and dirt more quickly than cold water.
On the other hand, some people prefer using cold or lukewarm water instead of hot. This is a great option for those who want to avoid water spots or shrinkage when washing delicate fabrics.
In the end, you should use whatever temperature of water you’re most comfortable with when working with OxiClean.
Can OxiClean ruin clothes?
It is possible for OxiClean to ruin clothes, although it is unlikely. By using too much of the product, bleaching the fabric, or using the wrong formula for a particular fabric, one can damage the clothing.
Additionally, any stain remover like OxiClean should always be used following the instructions on the label. If too much of the product is used on delicate fabrics, such as silk or wool, it can fade or discolor the material.
It is important to always test the product on a small area of the clothing before applying it to the entire garment. Additionally, any product that contains bleach should not be used on silk or wool, since these materials will be damaged by the bleach.
Clothes should also be washed understanding the instructions on the fabric care label, taking into consideration whether the clothes can be machine-washed or must be hand-washed. Following these guidelines will help ensure that OxiClean does not ruin clothing.
Does OxiClean work on old stains?
Yes, OxiClean can work on old stains. It is a great stain remover because it uses the power of oxygen to lift and remove hard-to-remove stains. It can be used on a variety of fabrics, including cotton, wool, silk, and synthetic fabrics, so it’s great for a range of items.
When you’re dealing with an old stain, it doesn’t hurt to “pretreat” the stain with OxiClean. This means to apply a small amount of the product directly to the stain and let it sit for 10-15 minutes before putting it in the washer.
This can help loosen up any built-up dirt or gunk in the material and make it easier for the detergent to remove the stain in your wash cycle. To make sure the product works, it’s a good idea to check the manufacturer’s instructions to see if the system mentions treating old stains.
For example, some recommend not using a pre-soak cycle if you’re treating an old stain, while others do. Following the instructions should help you get the most out of the product and ensure it works on your old stains.
Does OxiClean actually clean clothes?
Yes, OxiClean does in fact clean clothes! It is a multi-purpose stain remover that has been around since 1997. OxiClean uses the power of oxygen to lift stains from fabrics, making it an effective way to remove a variety of tough stains without damaging the fabric.
OxiClean is available in pre-measured single-use stain removal packets, dissolved in water to form a paste or liquid solution, or even as a soaking solution.
OxiClean is designed to remove stubborn stains caused by grass, dirt, red wine, grease, and other everyday foods or drinks. It is even tough enough to remove the stubborn set-in stains caused by tough ingredients like coffee, chocolate and tomato juice.
OxiClean can be used to clean clothes in the washing machine, or as an effective pre-treatment solution. It can even be used on colorfast fabrics, is safe to use on white, bright, and dyed fabrics, and is gentle enough for use on delicate fabrics.
Does OxiClean really get the tough stains out?
Yes, OxiClean does get tough stains out. It has been proven to effectively remove a wide range of stains, from greasy food messes and dried-on dirt to grass and blood. This is largely due to its proprietary oxygen bleach formula, which is made from sodium percarbonate and sodium carbonate.
When you mix it with warm water, it creates an activated oxygenated bleach solution that acts as an effective stain remover. The oxygen helps to break down tough stains and the active cleaning agents work to penetrate the fiber and break away the dirt and stains.
Additionally, OxiClean contains a buffer to protect the colors of treated fabrics in the wash. Therefore, OxiClean really can get those tough stains out.
Why is OxiClean so effective in cleaning?
OxiClean is so effective in cleaning because it contains sodium percarbonate, a special cleaning agent that releases oxygen ions when it comes into contact with water. Those oxygen ions act like tiny scrub brushes that penetrate deep into textiles and fabrics to break down tough stains and dirt, making them easier to remove.
Plus, the oxygen ions are odorless, meaning that you don’t have to worry about any unpleasant smells lingering in your clothes. OxiClean also contains other effective ingredients, such as sodium carbonate, which helps break down dirt and oil, and sodium polycarboxylates that help remove tough stains.
So, with its combination of powerful cleaning agents, OxiClean is one of the most effective ways to confidently remove stains and revive your garments.
Is OxiClean just washing soda?
No, OxiClean is a commercial product that is made from sodium carbonate (aka washing soda) and a few other ingredients. It has been specifically formulated to act as a powerful cleaning agent and an agent for removing stains, grease, and grime.
Washing soda is the basic ingredient, but the other components of OxiClean make it more versatile and effective at tackling a wide variety of different stains. Ultimately, OxiClean is more effective at removing tough grime and stains than just washing soda alone.
Should OxiClean be used with hot or cold water?
Generally, hot water is more effective than cold water because it works to break down and dissolve dirt and grime more effectively. Hot water also helps to activate certain ingredients in OxiClean and enhances the cleaning power.
On the other hand, some items and fabric types may be more sensitive to hot temperatures. In these cases, cold water should be used. Before using OxiClean, it is important to check the fabric care label on the item you’re cleaning.
If it recommends using cold water, it is important to follow those instructions. It is also generally best to test a small area of the fabric with a diluted mixture of OxiClean and either hot or cold water to make sure the fabric won’t shrink or become damaged with the cleaning solution.
Do you mix OxiClean with regular detergent?
Yes, OxiClean can be used in combination with your regular detergent. When you use OxiClean together with detergent, you’re able to get the best of both worlds – the deep cleaning power of OxiClean combined with the detergent’s ability to leave clothes smelling fresh and clean.
Simply add your usual amount of detergent along with 1/2 cup of OxiClean to the washing machine. Be sure to use cold water for best results. When washing heavily soiled items or whites, you can increase the amount of OxiClean to 1 cup for an extra boost.
Keep in mind that OxiClean should not be used on wool, silk, or leather items.
Do you add laundry detergent with OxiClean?
Yes, you can add laundry detergent with OxiClean for a deep clean. To do so, add the OxiClean to the detergent compartment of the washer. It is recommended to add roughly half the amount of the regular laundry detergent you would use.
Then, add your preferred laundry detergent on top of the OxiClean. This will allow the OxiClean to work alongside the detergent and provide a deep clean that removes tough stains. In addition, it is often recommended that you pre-treat any stained items with OxiClean Stain Remover before adding them to the wash to get the most out of the OxiClean.
