No, the Stihl concrete saw is a 4-stroke engine. This is because 4-stroke engines are more powerful, reliable and fuel efficient, which are all important factors that should be taken into consideration when using a concrete saw.
The Stihl concrete saw is powered by a 1. 2kW (1. 6 hp) engine and has a max power output of 1,200 watts. The four-stroke engine is a high-performance engine mounted on special rubber dampening pads for a smooth and vibration-free operation, and has a cast iron cylinder for superb heat dissipation and longevity.
It also features a recoil starter and an electric starter, as well as an ignition system with integral switch.
Table of Contents
How many cc is a Stihl TS 420?
The Stihl TS 420 is a cutting saw designed for use in professional landscaping applications. It is equipped with a 79. 9 cc engine and is the largest cylinder displacement of all the professional cut-off saws manufactured by Stihl.
This engine gives the TS 420 the power to easily handle tougher cutting tasks and allows it to operate with up to 66% fewer emissions than a comparable 2-stroke engine. The power output is rated at 2.
4 kW which is enough for all tough cutting jobs, making it perfect for landscape contractors and other professional users. The machine also has a fuel tank capacity of 750mL which gives it a long run time before needing to be refuelled.
What is the difference between Stihl TS410 and TS420?
The Stihl TS410 and TS420 are both powerful and portable cutoff saws designed for precision and durability. However, there are a few differences. The TS410 has a 2. 6 bhp engine, a cutting wheel diameter of 12 inches, and is designed for a cutting depth of 3 3/8 inches.
In comparison, the TS420 has a 3. 1 bhp engine, a cutting wheel diameter of 14 inches, and is designed for a cutting depth of 4 5/16 inches. In addition, the TS420 has an unbeatableanti-vibration system, which makes it significantly more comfortable to use.
The TS420 also has a larger fuel tank, so it can run for longer periods of time before needing to be refilled. Lastly, the TS420 comes with a tool-free filter cover, while the TS410 does not. All in all, the TS420 is the more powerful and durable option of the two.
What CC is a STIHL 410?
The STIHL 410 is a chainsaw with a 2. 2 kW / 3. 2 PS engine, featuring an electronic ignition system and an adjustable oil pump. It has an engine displacement of 40. 1 cm³ and a two-stroke petrol engine with a cylinder bore of 39 mm and a piston stroke of 30 mm.
It also has a 25. 4 cm / 10″ OREGON sprocket nose guide bar and a chainsaw chain pitch of. 325″. This chainsaw has a dry weight of 5. 3 kg and is also equipped with an HD2 filter system and a separate decompression valve for easier starting.
The STIHL 410 has a combination of a high torque and low weight for optimum cutting performance.
Does a STIHL concrete saw take mixed gas?
No, a STIHL concrete saw does not take mixed gas. STIHL concrete saws require a 50:1 ratio of unleaded fuel to STIHL HP Ultra Oil. Using the wrong gas-to-oil ratio can significantly reduce a saw’s performance and can damage the engine.
STIHL recommends specifically formulated STIHL HP Ultra Oil for use in their engine products. Using a different brands’ oil or a different oil-to-gas ratio can also damage internal engine components, resulting in costly fixes or a complete replacement.
Therefore, it is important to always use the correct fuel-to-oil ratio and only use the STIHL HP Ultra Oil when using a STIHL concrete saw.
Is STIHL a 2-stroke or 4-stroke?
Stihl is a 2-stroke engine which follows the same principle as other 2-stroke engines. In the 2-stroke process, the engine connects the piston-crankshaft assembly to the automatic fuel/air mixture system.
This system includes an intake port, a combustion chamber, and an exhaust port, all of which have an integral part in the cycle of operation. As the piston moves downward, the intake port is opened and a precise mixture of fuel and air enters the combustion chamber.
The piston then compresses the mixture and a spark plug ignites it, creating a combustion force that pushes the piston back up, transferring power to the crankshaft. After the combustion forces are exhausted, the exhaust port opens, allowing the combustion particles to exit, and the piston-crankshaft assembly begins another cycle.
This efficient system of operation is used in most of Stihl’s power tools, giving them the recognized reliability and performance for which they have become renowned.
Are all STIHL saws 2-stroke?
No, not all STIHL saws are two-stroke engines. STIHL offers products that feature both two- and four-stroke engines. STIHL two-stroke engines are ideal for the homeowner and entry-level users that only need to use the saw a few times a year.
Four-stroke engines, however, are more powerful, due to the increased compression, and provide greater overall performance and longevity. STIHL four-stroke engines also require less maintenance and produce fewer toxic gases than two-stroke engines.
STIHL also offers PureFire low emission engine technology for both two- and four-stroke engines. This technology reduces exhaust emissions by up to 75 % compared to the emissions of STIHL two-stroke engines that meet EPA and CARB standards.
How do you start a Stihl TS 700?
To start your Stihl TS 700, you should begin by properly preparing the machine before attempting to start it. Open the gas cap and fill the gas tank with unleaded gasoline. Check the oil level by looking at the bar and chain oil window located on the side or top of the saw.
Fill the bar and chain oil tank with Stihl bar and chain oil. Make sure the spark arrestor screen is clean.
Next, engage the cutting attachment. Push the red power switch button located under the starter cover to the “on” position. Rotate the clutch that is located on the saw’s side towards the rear handle to the “start” position and pull out the choke to the “full open” position.
Pull the start cord strongly and evenly until you feel resistance. Then, pull the cord vigorously and suddenly to start the saw. Once the saw is running, press the red power switch button in to the “run” position and gradually push the choke in to the “closed” position.
You may now begin cutting with the machine.
How deep will a 12 inch concrete saw cut?
A 12 inch concrete saw can make a maximum cutting depth of up to 7 inches when using a dry-cutting diamond blade. When using a diamond segmented blade, a 12 inch saw can cut up to 3 inches in one pass and 5.
5 inches when taking a second pass. Depending on the power of the machine being used, the maximum cutting depth can be slightly more or less than the estimated depths. Additionally, material characteristics such as hardness, homogeneity, and amount of reinforcement bars will also affect the cutting depth.
What is the deepest cutting concrete saw?
The deepest cutting concrete saw is the Husqvarna K3000. This diamond blade saw is capable of cutting 36 inches deep and has a powerful 15 amp motor that can generate up to 4500 RPM. The saw has an ergonomic design for improved safety and comfort and includes a dust guard to make the job easier.
The Husqvarna K3000 can handle even the toughest cuts – from small driveways to large asphalt roads. It can even cut through thick concrete and reinforced steel, making it ideal for a wide range of projects.
The K3000 is a powerful and reliable machine that is sure to meet your cutting needs.
Which concrete cutter is best?
Choosing the best concrete cutter depends on a number of factors, including the size of the concrete project, the type of job to be completed, and individual preferences. Generally speaking, the most popular concrete cutter is a gas-powered saw, but electric cutters are increasingly becoming more popular and often seen as being more energy efficient.
Additionally, handheld masonry saws, such as dry saws, are sometimes used for smaller jobs. These operate in a circular motion, cutting away at concrete slowly, as powered by electricity. For smaller projects, an oscillating saw with a concrete cutting blade might be suitable, as it can make quick precision cuts in hard materials with minimal dust.
When it comes to larger projects, such as saw-cutting an entire driveway or foundation, a gas-powered saw may be more suitable. It is powerful enough to cut through concrete quickly and with minimal dust.
Additionally, some saws are also available with power sensors that detect when the saw blade is about to hit embedded steel, so the saw automatically shuts off, preventing it from damaging the steel.
Ultimately, the best concrete cutter for any project will depend on a variety of factors and the specific needs of the job.
What is the consaw to buy?
When it comes to purchasing a chainsaw, there are a few things that need to be taken into consideration, such as what type of saw is best for the job at hand, and which features are important. The type of saw you need depends on the type of work it will be used for, such as cutting firewood, pruning branches, or clearing downed trees.
If the job requires longer, thicker cuts, then a larger saw like a 45cc or higher should be considered.
In terms of features, key components such as a motor, bar length, chain size, and safety features come into play. The motor should be powerful enough to handle the job at hand, and the bar length should be long enough to get the job done with as few cuts as possible.
Additionally, having features such as a built-in electronic ignition and tool-less chain tensioning makes life easier when it comes to getting the saw started and keeping it at the right tension. Regarding safety, make sure you are using a saw with a hand guard and chain brake in place.
Finally, don’t forget about budget and manufacturer. Chainsaws can range from a few hundred dollars to well over a thousand, so taking your budget into account is essential. Also, manufacturers are important—some are well known for producing a quality product, while others may not be as reliable.
After taking all of these factors into consideration, you’ll be able to make an educated decision as to which chainsaw is the best for you.
Is it better to cut concrete wet or dry?
The answer depends on the project you are working on. Generally, it is always best to cut concrete when it is dry. Cutting wet concrete can lead to greater dust production and it can also be more difficult to cut a neat, even line.
Wet cutting can also cause water to pool up and cause issues during future procedures, like the application of sealants or coatings. In addition, wet concrete can be much messier than when it is dry.
On the other hand, there are certain cases in which wet cutting concrete can be beneficial. For example, if you need to make a very clean, precise cut, then wet cutting is often the better option. This is because wet concrete does not chip as easily and can be cut more precisely than when it is dry.
Wet cutting is also beneficial for projects that include smaller cuts, such as tile sawing—this method can often produce a much cleaner, smoother finish.
In the end, it is important to do your research and determine which method is best for the type of job you are doing. If you are unsure, it is always best to consult a professional or contact your local concrete supplier for advice.
How do you cleanly cut concrete?
Cleanly cutting concrete requires special tools and techniques. The most common methods used to cleanly cut concrete are sawing, drilling and grinding.
Sawing is the most commonly used method to cleanly cut concrete. Depending on the size of the cut, a handheld power saw with a diamond-tipped blade may be suitable or a wet saw may be necessary. A wet saw uses a gasoline-powered motor and a high-velocity blade to cut into the concrete while a stream of water flows over the blade, containing dust particles and cooling the blade to reduce wear and tear.
Drilling is another commonly used method to cut concrete. Core drills are used to drill circular holes into the surface and are typically used in situations where precision cuts require a straight edge and a perfect circle.
Grinding is another common method for cleaningly cutting concrete. An angle grinder is used for this method, with a diamond cutting wheel attachment. This method is typically used for making small adjustments and creating intricate details in the cut.
For safety reasons, protective gloves and goggles should be worn and hearing protection is usually necessary.
When cutting concrete it is important to remember that dust and debris will be created, so adequate ventilation and moisture control are necessary to avoid damage to the surrounding area. In addition, the use of protective gear when using power tools is a must.
With the right tools and techniques, cleanly cutting concrete can help ensure a successful project.
Does concrete need to be wet to cut?
No, concrete does not need to be wet in order to be cut. A few of which do not require wetting the concrete. Most commonly, a concrete saw is used to cut concrete. This tool is often powered by electricity, gas, fuel, or propane and is used to cut through dry concrete.
Additionally, a hammer and chisel can be used to cut through dry concrete, although this method can be time consuming and labor intensive. Lastly, specialty tools such as core drills, wall saws, and wire saws can be used for dry cuts in concrete, but these tools are typically more expensive and require more skill to use.
For larger projects, it may be more practical to wet the concrete in order to make cutting easier and more efficient.
