The cost of a two-post lift with installation is largely dependent on the type of lift, brand, and options selected. Generally speaking, two-post lifts range from about $2,000 for non-brand, lower capacity units to upwards of $4,000 for higher-capacity lifts from reputable brands such as Rotary Lift and Forward Lift.
The extra cost associated with the installation of a two-post lift can range from an additional $700 to $2,000, depending on the difficulty of the installation, the type and quality of the lift, and whether additional parts are needed.
Therefore, the total cost of a two-post lift with installation could be anywhere from $2,700 to $6,000. For more accurate and competitive prices, it is recommended to shop around and get quotes from multiple providers.
Table of Contents
How much does it cost to install a 2 post car lift?
The cost to install a 2 post car lift varies depending on the type of car lift you choose, as well as the installation and safety procedures. Most garages and automotive centers will charge an hourly rate for their installation service on your car lift, which is typically around $60 per hour in addition to the cost of the lift itself.
Depending on the size and complexity of your lift, the installation process could take anywhere from 3-12 hours. The basic car lifts are priced around $1,500, but can run over $5,000 for larger more complex lifts.
Additives for your car lift such as an additional powerunit, caster and/or rolling bridge jacks, and other safety features can also drive the cost of your car lift higher. Therefore, it is important to determine your needs prior to shopping and installing a car lift.
If you purchase a car lift from a reputable supplier, they should provide a qualified installer who can install the lift properly, as well as provide instruction on proper use and maintenance.
How deep should concrete be for 2 post lift?
The optimal depth for concrete when installing a two post lift is generally 6” to 8”. The concrete should be 4,000 PSI or stronger, with a width that is 8” greater than the base of the lift’s columns on each side.
When cutting out the concrete, make sure to remove the dirt and debris down to a depth that is 4” deeper than the desired finished depth.
In order for the installation to be as secure and stable as possible, it’s advisable to also add rebar in each corner. This requires using anchor bolts, which anchor the columns of the lift to the concrete.
Use re-rod to vertically reinforce the concrete, as well as shear pins or J-bolts to horizontally reinforce it.
Before pouring the concrete, make sure that the post holes are deep enough to pass requirements, as well as wide enough to accommodate the width of the concrete being added. If the post holes are too shallow, the concrete may slump and leave the structure unstable, which could lead to safety concerns, depending on the lifts capacity.
To ensure safety and stability, it is important to follow the installation instructions carefully, and ensure that the concrete is properly poured and set.
How high of ceilings do you need for a 2 post lift?
The height of the ceilings required for a two post lift will vary depending on the type of lift you purchase. Some two post lifts are designed to fit inside garages, meaning they will likely require the clearance of an 8′ ceiling.
Other two post lifts, like commercial grade lifts that are designed for use in auto service & repair shops, may require the clearance of a 14′ ceiling. Regardless of what type of two post lift you have, it is important to ensure you have adequate clearance between the lift and ceiling before and during operation to prevent any damage to the lift or ceiling.
Which 2 post car lift is best?
The best two post car lift for most people depends on a few factors, such as the size of the vehicle, the desired lifting capacity, and the installation requirements. Some of the highest quality two post car lifts include the BendPak XPR-10A, MAHA Lifts CL10XL, Challenger CL10LP & CL10SP, and Rotary Lift SPOA10.
All of these lifts have a variety of options, including different frame sizes, lift capacities, and post heights.
The BendPak XPR-10A is a versatile two post car lift that has a 10,000 lb. capacity and can lift cars up to 193 inches long and 78 inches wide. It features adjustable column height, diamond plate runways, and a multi-position safety lock system.
The MAHA Lifts CL10XL two post lift features a 10,000 lb. lifting capacity and a 183 inch max lifting height. It has adjustable columns and is equipped with direct-drive dual hydraulic cylinders.
Challenger’s CL10LP and CL10SP models both feature a 10,000 lb. lifting capacity and are designed for lifting cars, trucks, and vans. The CL10LP also has a 7,000 lb. capacity for lifting heavier vehicles.
Both models have adjustable columns, wide carriage construction for extra support and stability, and an adjustable motor position.
The Rotary Lift SPOA10 has a 10,000 lb. lifting capacity and is designed for working on regular and extended body vehicles. It has a compact frame and adjustable columns for easier installation. It is also equipped with a single point lock release system for added safety and convenience.
How much should I pay for a 2 inch lift?
The cost for a 2 inch lift will depend on a few things such as type of lift, materials used, and specific vehicle model. If you plan on doing a suspension lift, it could cost anywhere from $500 to over $2,000 depending on the type of suspension, the quality of components, and the labor involved.
If you choose a body lift, it will generally be much less expensive, running anywhere from $100 to $400. For lift kits that don’t involve a suspension, which may include spacer or shackle lifts, it will be even less expensive and could range anywhere from $50 to $200.
It is highly recommended to put in some research and read reviews in order to pick the right lift kit for your specific vehicle that fits your needs and budget.
Can I put a 2 post lift in my garage?
Yes, if your garage is designed with enough space and you have the budget for it, you can put a two-post lift in your garage. Two-post lifts are ideal for home garages as they typically require less floor space than a four-post lift.
When selecting a two-post lift for your garage, you’ll need to make sure you get the right sized lift to fit your car and garage space. You’ll also need to ensure there’s a sufficient power supply, plenty of headroom, and adequate clearance around the vehicle to ensure proper operation.
Additionally, you’ll want to make sure the ground is even and level and the garage walls are strong enough to support the lift. Once all of these requirements are met, you can safely install your two-post lift and begin conducting repairs and maintenance on your vehicle.
Is a 2 post or 4 post lift better?
The decision of whether to purchase a 2 post or 4 post lift depends on a few factors such as what type of vehicle you are looking to lift, the size/weight of the vehicle, and the amount of space you have in your garage or workspace.
A 2 post lift generally has a lower initial cost, is less space consuming, and may require less professional installation. A 4 post lift is often the preferred option for heavier vehicles since it is sturdier than a 2 post lift and therefore safer.
Furthermore, a 4 post lift often allows easier access to the underside of a vehicle for repair or customization, and some even come with accessories like a parking platform. Ultimately, the choice of which lift to purchase depends upon the desired balance of cost, size, and functionality for the particular situation.
How tall should a garage be for a lift?
The minimum height for a garage to accommodate a car lift is typically around 10 feet in order to ensure the lift has the proper amount of clearance to be operated safely. This can vary depending on the type of car lift and height of the car however.
It is recommended to check the requirements of the lift you will be using, as lift manufacturers may have specific needs that may need to be addressed. Additionally, the surrounding area and any overhead obstacles may need to be taken into account when determining the ideal height of the garage.
Generally speaking, 12-14 feet is generally recommended to ensure the necessary clearance for the lift and car.
Are Challenger Lifts certified?
Yes, Challenger Lifts are certified. They are certified by the National Automotive Review Board (NARF) and their lifts are inspected and approved by a public authority that are accredited by NARF. In addition, their lifts are also tested and certified to several industry standards such as UL, CE, and ETL.
In addition, all of the different models carry a limited warranty of two years or 24,000 cycles and this warranty covers all of the parts used in the lift.
When purchasing a lift it should be certified by?
When purchasing a lift, it is important to make sure that it is certified by a reputable entity. This is to ensure that it meets safety standards and is fit for purpose. Ideally, a lift should be certified by a third-party testing agency such as UL, ETL, CE, or TUV.
These organizations have rigorous testing protocols in place to test and certify products to meet safety and performance standards. This helps to ensure that the product will be reliable and perform as desired over its lifespan.
Additionally, most jurisdictions require that lifts be certified and registered before operation. This also helps to ensure that operators and passengers are kept safe when using the lift.
Does snap on own Challenger lifts?
No, Snap-on does not own Challenger lifts. Challenger is a different company that specializes in producing high-quality automotive lifts, like two-post lifts, four-post lifts, drive-on lifts, and motorcycle lifts.
They offer a variety of lift models that are designed to meet the needs of any shop. Snap-on does not make lifts; instead, they offer a wide variety of specialized tools and diagnostic equipment for automotive technicians.
Snap-on also offers a range of scanning tools, power tools, and LED lights.
How often should Challenger Lifts be tested?
Challenger Lifts should be tested on a regular basis in accordance to the manufacturer’s instructions and industry safety standards. Regular inspections of the lifts should be done on a monthly basis to ensure proper function and safety.
Any repairs or necessary maintenance should be done as per the manufacturer’s instructions. In addition to monthly inspections and maintenance, Challenger Lifts should be load tested at least three times a year, as well as tested after any major repairs are completed.
If the lift has a static hold feature, this should also be tested at least once a year.
What does Ali certified mean?
Ali Certified is a certification program created by AliExpress, an online marketplace selling millions of products from around the world. The certification program verifies that merchants on AliExpress meet a certain standard of quality and authenticity in their products and services.
It requires merchants to provide detailed information about their products and services and provide documentation that proves that their products are genuine and of high quality. Furthermore, Ali Certified merchants must also comply with AliExpress’s policies and guidelines, as well as their own internal rules.
This program ensures that AliExpress customers can shop confidently knowing that they are getting quality products from reputable sources.
Who manufactures Challenger lifts?
Challenger Lifts are manufactured by the Challenger Lift Company which is based out of Louisville, Kentucky, United States. The company has been in business since 1981 and is one of the world’s largest automotive lift manufacturers.
They offer a wide range of products including garage lifts, service lifts, car storage lifts, drive-on storage systems, parking lifts, and other automotive equipment. The company is ISO/TS certified and prides itself in offering superior quality lifts that are built to last.
The company also offers a variety of lift accessories, from customized bases and decks to adjustable arms and pads. Additionally, Challenger Lifts offers professional installation, maintenance, and repair services for all their lift models.
