Skip to Content

How much does it cost to install molding per linear foot?

The cost of installing molding per linear foot varies greatly depending on the type and style of molding as well as the specific location and difficulty of the project. Generally speaking, the cost is between $1 to $10 per linear foot.

This may be higher for more intricate moldings such as crown moldings. Labor and installation costs may also factor into the total cost of the project. It is important to chat with an experienced contractor for an exact estimate of the cost per linear foot of the specific molding and project that you are looking to have installed.

How much does it cost per linear foot to install baseboards?

The cost per linear foot to install baseboards depends on several factors, including the type of material used, the complexity of the layout, and the labor involved in the installation. For example, baseboards made of wood can range between $1-$6 per linear foot, while low-cost plastic or composite baseboards can range from $0.

50-$1 per linear foot. If the layout of the installation is complex or requires the use of miter saws, the cost can increase due to the additional labor involved. Additionally, installation of primed baseboards or those with a finish applied will likely be more expensive than those that arrive with a basic finish.

Finally, if the installation is being done by a professional contractor instead of being done by the homeowner, then additional costs may need to be added in. In general, you should expect to pay anywhere between $1-$6 per linear foot to install baseboards, depending on the factors discussed above.

What is the average labor cost to install trim?

The average labor cost to install trim depends on the type of trim being installed and the size of the job. Generally speaking, it is usually between $2 and $8 per linear foot, plus any additional supplies needed.

For more complex trim jobs, such as creating decorative crown molding, labor costs can range from $4 to $10 per linear foot or even more. Factors such as the complexity of the job, the experience of the installer, and the labor rate in your area will usually determine the final cost.

It is best to get quotes from multiple professionals to find the right one for your project.

How do you calculate linear feet for molding?

Calculating the linear feet of molding required for a project is relatively easy. To do so, simply measure the height and width of the area in which the molding will be installed, and then multiply those measurements together.

This will give you the total area in square feet. Next, divide the area (in square feet) by the width of the molding you plan to install. This will give you the number of linear feet of molding you will need.

For example, if you plan to install molding around an area that has a width of 8 feet and a height of 8 feet, your total area would be 64 square feet. If the molding you plan to install is 3 inches wide, you would divide 64 square feet by 0.

25 feet (because there are 0. 25 feet in 3 inches). This would give you 256 linear feet of molding required.

How many linear feet of baseboard do I need per square foot?

The answer to how many linear feet of baseboard you need per square foot depends on the height of the baseboard and the shape of the room. For standard 8 inch baseboard, 1 linear foot of baseboard is needed per square foot of wall space; however, taller baseboards, such as those that are 10 or 12 inches high, require 1.

25 to 1. 5 linear feet of baseboard per square foot of wall space. Additionally, if the room has many corners or odd angles, it is necessary to add extra to accommodate the curved areas. Generally between 10 and 15% of your baseboard material will be lost to corner cuts.

When calculating your linear footage, it is a good idea to add 10 to 15 % to the total, or buy 10–15% more baseboard than you think you will need.

What should I pay for baseboard installation?

The cost of baseboard installation will vary depending on the size of the area that needs to be covered and the type of material you choose for the boards. Generally, professional baseboard installation ranges from about $4 – $8 per linear foot for baseboard only (not including any materials), with projects that require more intricate detail such as corner blocks and mitered cuts typically costing more.

This does not include the cost of the boards themselves, which can vary depending on the type of material that you choose. Common materials for baseboard installation include MDF, PVC, and wood, with PVC and MDF being the most common and least expensive options.

On average, the material cost alone should range from around $1-3 per linear foot, though they can be more expensive depending on the type of wood you choose. It’s important to also factor in the cost of any accessories you may need for your baseboard installation such as corner blocks, trim pieces, and adhesive.

In order to get the most accurate estimate, we recommend that you contact a professional to get a more detailed assessment and quote.

How do I estimate baseboards?

Estimating baseboards is fairly straightforward but does require some basic math. To begin your estimation, you should measure the area of your room(s) or wall(s) that need to be covered. You can measure the length and width of the area to be covered and then multiply them together to get your total square footage.

Once you have a number, you should begin the process of determining how much baseboard trim you need. If you are looking to install one continuous piece of trim down the length of your wall, you will want to purchase trim pieces that are equal to or more than the total length of your wall.

Some baseboards also come in two or more pieces, so you will need to measure how much trim you need to cover each section. If you do purchase separate pieces, be sure to add an inch or two to each piece to account for overlapping pieces.

Next, you should also factor in the sides of doorways, closets, and any other notched areas that your baseboards need to slide around. To measure for these areas, use a ruler and measure the boundaries of the notched area so that you can purchase the appropriate trim.

Once you have accounted for all the pieces you need and have the dimensions of your trim, you can begin the process of purchasing the baseboards. You can do this online, at a hardware store, or through a home improvement company.

Be sure to measure your walls and double check all measurements prior to purchasing as it can be expensive to replace baseboards if you buy too much or too little.

How much does trim work cost?

The cost of trim work varies depending on the type of trim, the location, and the extent of the project. Generally, though, basic trim work to complete a standard room can range from approximately $800 to $1600.

More complex trim work such as molding and wainscoting typically costs upwards of $3000. Factors such as the size of the room needing work, the type of wood used, the installation of any new materials, and the labor involved can all affect the final cost.

For more accurate estimates, it is best to consult a professional carpenter for a detailed breakdown of expected costs.

Should baseboards be nailed or glued?

It depends on the type of baseboard you are working with. If you are using a wooden baseboard, it is best to use nails to secure the boards. Nails will allow the boards to be easily removed if needed.

If you are using a plastic or metal baseboard, it is best to use a stronger adhesive such as a silicone adhesive or construction grade adhesive. This type of adhesive is more reliable and will help ensure the boards will stay in place.

In either case, it is important to make sure that you are using the appropriate fasteners for the type of material you are working with.

Do you paint baseboards before or after installation?

Whether to paint baseboards before or after installation largely depends on the location of the baseboards and the type of paint used.

If the baseboards are being installed on walls that have already been painted, but you want to change the color of the paint, it is best to install the baseboards first and then paint them after installation is complete.

This will help reduce the chance of any paint getting onto the walls, as well as ensuring an even, seamless finish once the baseboard has been installed. Additionally, be sure to use an oil-based paint that is suited for high-heat environments, such as that of a living room.

On the other hand, if the baseboards are being installed on drywall that has not yet been painted, then it is best to paint them before installation. Painting before installation will ensure that the baseboards have a uniform, even color all around.

Be sure to use a paint that is suited for drywall and can withstand any moisture that may occur. Additionally, be sure to caulk around the baseboard for a finished look and issue protection.

Overall, whether to paint baseboards before or after installation depends on the location of the baseboards and the type of paint to be used.

How do you quote trim work?

Quoting trim work is a process that involves taking measurements and calculating the amount of trim needed to complete a project. It can involve measuring the walls to determine the perimeter, measuring for the length of the baseboard, and measuring for the width of the door trim.

From there, the measurements can be used to determine the amount of trim needed to cover the perimeter, or trim lengths. It is important to take precise measurements to ensure the trim will fit properly and the job looks professional.

After taking the measurements, it is then important to double-check them to make sure there are no errors. Once the measurements are double-checked and accurate, the trim materials can be purchased and cut to size.

Once the trim pieces are cut, they need to be dry-fitted to ensure everything lines up and looks correct. Once it is fitted, the trim pieces can then be secured with nails or glue. Finally, the trim pieces can be sanded and painted to complete the job.

How much are trims usually?

Trims vary greatly in price depending on several factors including the salon, the stylist, and the type of trim you request. Generally, a basic wet hair trim that just involves cutting the ends off of your hair will start at around $15 and can go up from there.

More intricate trims, such as short layers and bangs, typically cost around $30 or more. Color trims, where color is applied to the ends of your hair for a highlight or balayage effect, usually start at around $60 or more.

In general, the longer and thicker your hair is, the more expensive the trim will be. Some salons also add a premium for heat styling services such as blow drying, curling, and straightening that may be used along with the trim.

It is usually best to call the salon to get a quote for the exact services you are interested in.

Is trim measured in linear feet?

Trim is not typically measured in linear feet, as the length of trim pieces is usually measured in feet and inches. For example, trim pieces such as baseboards and crown mouldings are typically sold in 8-foot sections but they are still measured in feet and inches – not linear feet.

The width of the trim pieces is typically measured in linear feet, not the length – this would generally be referred to as the “length of the run”. For example, a 10-foot section of baseboard moulding would be said to have a 10-foot “run”.

The linear measurement does not change with the type of material used, so designer trim pieces such as chair rails can also be measured in linear feet.


  1. Trim Installation Cost & Cost to Install Trim per Linear Foot | Angi
  2. 2023 Average Trim Installation Cost | Cost Per Linear Foot
  3. Cost to Install Trim Molding – Homewyse
  4. How Much Does It Cost To Install Trim Molding? – Porch
  5. Cost to Install Baseboard Molding |