The amount that a handyman charges to hang curtains will depend on several factors, such as the type of curtain, the size of the window, and the length of time required to complete the task. Generally speaking, most handymen charge an hourly rate of around $50-60 per hour, though this can vary depending on location and the level of experience and expertise of the handyman.
If a simple curtain rod is needed for a fairly small window, the task could take anywhere from one to two hours to complete at an estimated cost of $50-120. For larger windows with complex curtain treatments like a valance, swags, jabots, and tie-backs, the task could take up to four hours at a cost of around $200-240.
It’s highly recommended that you get a written estimate from the handyman with a breakdown of all the costs associated with the job before work begins to ensure that you get a fair price and avoid any potential headaches down the road.
Table of Contents
How much does it cost to put up curtains?
The cost of putting up curtains can vary widely depending on a variety of factors. These factors include the type of curtains being put up, the type of window that requires this, the size or length of the curtains, and the required installation method.
Generally speaking, if you’re working with standard sliding glass-type windows, you can expect to pay anywhere between $50 – $150 for professional installation. Factors such as height, length, and complexity of the installation can increase the cost.
If the school denotes a more involved installation, the cost can increase to upwards of $200 – $300.
If you choose to install the curtains yourself, you can save significantly, however it can be a more involved process with more room for error. For DIY installations, you can expect to spend roughly $30 – $60 for supplies such as brackets, screws, curtains, and curtain rods.
Most retailers selling curtains often have discounts, so that may be something to look out for. Ultimately, the cost to install can vary depending on the type of curtain and installation method, so it’s best to assess your requirements thoroughly before setting a budget.
Can I get someone to hang my curtains?
Yes, you can certainly get someone to hang your curtains! Depending on your budget and the type of curtains you have, you could hire a professional curtain installer or a handyman to hang them for you.
If you’re looking for a more cost-effective solution, you could always enlist the help of a friend or family member who’s handy with tools. Making sure your curtains are hung correctly is important for both aesthetic reasons (to make sure they look great) and safety reasons (to make sure the hanging rods don’t become a hazard).
If you decide to hire a professional, make sure to do your research and find a reliable contractor.
What is the rule of thumb for hanging curtains?
When hanging curtains, a general rule of thumb is to install the curtain rod four to six inches above the window, measured from the top of the window trim. Additionally, your curtain rod should be at least two to three inches wider than your window on both sides to ensure the curtains hang properly and look balanced when closed.
You should also ensure that your curtain rod is mounted to the wall or ceiling at least three to four inches beyond the edge of the window frame to maximize the amount of light that is blocked out when the curtains are closed.
Finally, it is important to purchase curtains that are appropriate for the size of the window. Curtains that are too short or too narrow will make the window appear smaller.
What not to do when hanging curtains?
When hanging curtains, there are several things you should avoid in order to have the best possible finished product.
First, avoid using nails or other items to hang your curtains as this can damage the wall, cause leaks or even poke through the curtain fabric. Instead, use proper brackets and rods designed specifically for curtains.
Also, be sure not to overextend the rod you’re using to hang your curtains. It may be tempting to make it go all the way along the wall, but having too much fabric hanging down from the rod will make your curtains look bulky and can reduce their lifespan.
It’s also important to avoid hanging your curtains too high. This might mask the window to the point where there’s no light coming in and it won’t look good either. Make sure to hang just enough for your curtains to frame the window nicely.
Finally, avoid hanging heavy curtains if you don’t need them. Heavier curtains can be a hassle to open and close and will cost more to install.
By taking these precautions, you can make sure your curtains are hung properly and look great.
Is installing curtains easy?
Installing curtains is relatively easy depending on the type of curtains you have. If you have curtains that require a rod, installation is as simple as following the instructions included with the rod.
Wall brackets must typically be attached to the wall, the curtain rod placed on the brackets, and then the curtains hung on the rod. Since curtains that require rods often come pre-grommeted, you only need to slide the rings through the curtain fabric and onto the rod.
If you’re installing curtains without a rod, the installation is even simpler. Some curtains come with pre-attached adhesive hooks that can be adhered to the wall or window frame. All you need to do after attaching the hooks is hang the curtains on the hooks.
Curtains that do not come with adhesive hooks can be hung with any type of removable hanging hardware, such as removable adhesive strips or Command Hooks.
Overall, with the right hardware, installation of curtains is relatively easy.
How long do custom curtains take?
The timing for custom curtains can vary depending on several factors such as the complexity of the design, the size of the windows, and the materials used. Generally speaking, the process of creating and stitching custom curtains takes approximately 2-3 weeks after the measurements have been taken and the fabrics and design styles have been selected.
If the design is relatively simple and only requires minimal alterations such as hems and grommets, then the project could be completed more quickly. Certain stores may be able to offer a quicker turnaround time based on their current demand and resources.
It is important, however, to not to rush through the process as quality is key when it comes to custom curtains, so it is essential to take your time and be thorough in the assembly.
How long does a window treatment take?
The amount of time it takes to install a window treatment can vary depending on the type of window treatment, the condition of the window, and how experienced the installer is. For example, installing a simple fabric curtain may take a few minutes while installing a complex cellular shade can take much longer.
Additionally, if the window needs some preparation or alterations before the treatment is installed, this could add to the overall time as well. On average, professional installers are able to full install a window treatment within 1 to 2 hours.
Is it hard to hang curtains?
Hanging curtains is not generally a difficult task, but it does require time and patience as well as access to the right tools. It is generally easier with two people, but can also be done solo. Begin by measuring the curtain rod to ensure the curtains will fit, then mark the placement of the rod with a pencil.
Using a power drill, screw the brackets into the wall or ceiling. Once the brackets are in place, you can slide the rod through the curtains and secure at each end. Depending on the fabric or weight of the curtains, you may need to use tiebacks or curtain weights to ensure that the curtains hang properly.
Finally, you can use a steamer or an iron to get out any wrinkles in the fabric. With the right tools and a bit of patience, hanging up curtains doesn’t have to be a difficult process.
Do I need a center support for curtains?
Whether or not you need a center support for your curtains depends on the type of rod you choose and the size of your curtains. If you have particularly heavy or wide curtains, then you may need a center support for added stability.
For lighter, shorter curtains, generally a center support isn’t necessary. When in doubt, it’s good to consult a professional to make sure you are installing your window treatments safely. You may also want to consider adding a center support if you plan to hang long-term curtains or blackout curtains as they will likely be heavier and require more support.
Additionally, electric curtains may also require a center support. Curtains that require a center support should have a support bracket placed every 1-1.5 meters.
Do curtains add value to a house?
Yes, curtains add value to a house in a number of ways. They can instantly provide privacy, while also creating a cozier atmosphere. They also can help with energy efficiency and soundproofing, since they can give insulation from both heat and noise.
On top of that, adding curtains creates an opportunity to add bold and interesting color or pattern to a room, giving it a particular style and vibrancy that is hard to achieve with other items. All of these elements make curtains an excellent addition for any house and can significantly add value to a home.
Is it cheaper to install blinds or curtains?
The cost of installing blinds or curtains depends on several factors, including the type of blinds or curtains, the size of the window, and the installation process. Blinds tend to be less expensive to purchase and install than curtains, but some curtains are more affordable than others.
The installation costs for curtains and blinds can also differ depending on whether you hire a professional or do it yourself. Generally, installing mini blinds are easier and more inexpensive than installing curtains.
If there is a wood or metal frame around the window, the installation process for both blinds and curtains is more time consuming and costly. If you have a slider window, it can be more challenging and costly to install either blinds or curtains.
Ultimately, it is important to research different options and assess your own skills to determine the most cost-effective means of installation.
How much is labor to install blinds?
The cost of labor to install blinds can greatly vary, depending on a range of factors such as the size and type of blinds, the complexity of the installation, the complexity of any pre-installation work required, and the amount of time it takes to complete the installation.
The type of blinds you select may also affect the overall cost, as blinds come in a variety of materials and sizes. For example, some motorized blinds may require more manual labor to install, raising the cost.
For a general ballpark estimate, you can expect to pay around $100 to $250 for labor to install blinds, not including the cost of the blinds themselves. However, if the window is large or the installation is complex, labor costs can rise quite substantially, potentially topping $500 or more.
It’s best to consult with a professional contractor or installer to get an accurate estimate of the labor costs associated with your installation.
How much do you charge to put in a window?
The cost for installing a window will depend on the size, type, frame material, and features of the window, as well as the labor involved. Generally, you can expect to pay anywhere from $300 to $2,000 for window installation, with the average price being around $850.
However, adding special features like tempered glass, triple-pane glass, or low-emissivity (Low-E) glass will increase the overall cost of your window installation. Additionally, if you require a custom size window, or if you need to install several windows, the cost of installation will increase significantly.
Before committing to a window installation project, it is important to get quotes from several window installers to ensure that you get the best price.
What are the most expensive window treatments?
The most expensive window treatments typically consist of custom made options that draw from high-end materials such as silk, velvet, beaded fabrics, and mohair. Drapery panels and elaborate valances made from luxurious fabrics such as silk can be some of the most expensive choices for window treatments.
Depending on the fabric and requested customizations, these drapery treatments can range anywhere from $300 to $1500 per panel. Roman shades made with silk and beaded fabrics are also expensive and can range anywhere from $400-$1,000 + per window.
Additionally, motorized and automated shades, which can provide superior light control, convenience and security, can range in the $1,000 – $3,000+ range per window. Finally, remote control motorized blinds, shades, and shutters can range anywhere from $2,000 to $5,000 or more.
