The Lennox EL296V is a 96% efficient, two-stage gas furnace with an output capacity of up to 96,000 BTUs. This furnace is suitable for a wide range of homes, and its variable-speed blower helps to ensure even heating and improved indoor air quality.
It also features two-stage operation which can reduce odors, dust, and humidity levels within the home. The furnish includes an aluminized steel primary heat exchanger and also a stainless steel secondary heat exchanger.
The furnace is tested for reliability and efficiency to ensure it lasts for many years to come. It also comes with a 10-year limited parts warranty for peace of mind.
Table of Contents
What is the BTU of a Lennox gas furnace?
The BTU of a Lennox gas furnace depends on the model and the type of furnace you choose. For example, Lennox offers the EL296V, a two stage variable speed furnace, with a BTU range of up to 80,000. On the other end of the spectrum, Lennox also offers the ML193UH, a single-stage gas furnace, with a BTU range of up to 59,000.
The exact BTU rating for a particular model will depend on the size of the furnace and other factors. It is best to consult with a local heating and cooling specialist for assistance in selecting the best size and BTU rating for your particular needs.
How do I find the BTU of my furnace?
To find the BTU of your furnace, you will first need to locate the model and serial numbers of the unit. The model and serial numbers can usually be found near the bottom edge of the unit’s label, near the control panel, or on the outside of the furnace.
Once you have the model and serial numbers, you can use an online BTU calculator, such as this one provided by EnergyStar. gov here: https://www. energystar. gov/products/appliances/appliance-btu-calculator.
Simply input the information requested, including your furnace’s make and model, and it will calculate the BTU rating for your furnace. Make sure you provide accurate information for the best results.
How many BTU is a 3 ton furnace?
A 3 ton furnace will typically have a BTU output of around 36,000-45,000 BTUs. This depends on the furnace type and its efficiency. A high-efficiency system could have a BTU output at the lower end of the range (36,000), while an older model will likely be closer to the higher end (45,000).
In addition to the furnace size (3 ton in this case), these factors also influence the furnace’s BTU output: type of fuel used (gas, oil, etc. ), climate and weather conditions (temperature and humidity levels vary in different parts of the country), ductwork, and fan settings.
How big of a house will a 80000 BTU furnace heat?
The size of a house that an 80000 BTU furnace will heat will depend on a variety of factors, including its efficiency rating, regional climate, quality of insulation, air tightness, and usage patterns.
Generally, though, an 80000 BTU furnace is recommended to heat a space between 1700-2100 square feet in size.
In terms of efficiency, an 80000 BTU furnace with an AFUE (Annual Fuel Utilization Efficiency) rating of 80% or higher is the most efficient. A higher AFUE rating indicates that more energy is being used to heat the home and less energy is being wasted.
In addition to efficiency, regional climate determines the size of a house a furnace can heat. For example, a furnace may be able to heat a larger house in areas with milder climates than in colder climates due to the difference in temperature.
Areas that are warmer, require a lower BTU furnace than in colder climates.
The level of insulation and home airtightness can also affect the size of a house a furnace can heat. Poor insulation causes heat to enter and leave the home more quickly, requiring more energy to maintain a comfortable temperature.
Poor airtightness also allows air to escape, which causes the furnace to work harder to maintain the desired temperature.
Finally, usage patterns are important in determining the size of a home an 80000 BTU furnace will heat. If the furnace is running at peak efficiency or above, a larger home can be heated using less energy.
However, if the furnace is running below peak efficiency, due to fluctuations in usage, it may not be able to heat a larger home.
Overall, an 80000 BTU furnace should be able to heat a home that is between 1700-2100 square feet in size, depending on the variables mentioned above.
How much is a new Lennox furnace and air conditioner?
The price of a new Lennox furnace and air conditioner will vary depending on the specific model, size, and features. The price can range anywhere from around $3,000 to more than $10,000. The best way to get a more accurate estimate is to contact a local Lennox dealer and give them your information so they can provide you with a personalized quote.
In addition to the cost of the furnace and air conditioner, you also need to take into account the additional cost for installation and other labor.
How much does it cost to replace a Lennox furnace?
The cost of replacing a Lennox furnace will vary greatly depending on many factors, including the size of your home, the type and make of the furnace, and the fees charged by the installer/contractor.
Generally, the cost of purchasing a new Lennox furnace will range anywhere from $2,800 to $7,000, not including installation fees. Installation fees will depend on a variety of factors and will vary greatly depending on your location, complexity of the job, and other associated costs.
In addition, the cost of the installation will also depend on the size and type of equipment required, local labor costs, and other potential upgrades or changes that need to be made. It is always recommended to contact local furnace contractors in your area for an accurate quote.
Is it cheaper to replace AC and furnace together?
In general, it can be cheaper to replace an AC and furnace together rather than replacing them at separate times. First, it is usually less expensive to purchase a combination heating and cooling system rather than buying the components separately.
Additionally, you only have to pay for one installation cost, which can save a lot of money in the long run. Additionally, many companies offer deals when you purchase a full system that you wouldn’t get if you purchased a single unit.
Additionally, replacing both the AC and the furnace at the same time allows you to ensure that they are working together efficiently as a unit, lowering your energy bills over time. Finally, you don’t have to worry about any compatibility issues since you are replacing them together, making the entire process more efficient.
How much does a air conditioner furnace combo cost?
The cost of an air conditioner furnace combo typically depends on a variety of factors, including the size of the unit, its type (e. g. gas, electric, heat pump, etc. ), the brand, and the efficiency rating.
Generally speaking, a basic combo unit with a single-stage compressor will start at around $2,000, while a more efficient two-stage unit with variable-speed speeds may cost up to $4,000. More complex systems may cost up to $12,000 or more.
Additionally, installation costs can vary greatly depending on the complexity of the setup, and can increase the price of the combo unit.
Is Lennox more expensive than Carrier?
It depends on a variety of factors. Different models of Carrier and Lennox air conditioners have different prices, so it isn’t possible to say that one brand is always more expensive than the other. In general, high-end models from either brand will be more expensive than mid to low-end models.
Other factors that can influence the cost of HVAC systems include the size of the unit and the SEER rating (seasonal efficiency energy rating). Additionally, the price of installation and the cost of any required labor for maintenance or repairs will vary based on the contractor.
Therefore, it’s best to consult with a qualified HVAC professional in your area to get an accurate quote for the particular model you’re interested in.
Is Lennox a reliable brand?
Yes, Lennox is a reliable brand that has been providing quality heating, cooling, and air quality products since 1895. Lennox is one of the top providers of home comfort systems, and has earned the trust of its customers with products that last for many years.
All of their products are energy-efficient and come with a warranty to ensure that your investment is well-protected. Lennox products are known for their reputation for energy efficiency, durability, and quiet operation.
Not only do they provide a variety of products that meet the needs of their customers, but they also have excellent customer service. Lennox’s network of authorized dealers and service providers ensures you are getting the best service and product support when you choose this brand.
Ultimately, Lennox is known for its reliable products, services, and customer satisfaction.
How long does a Lennox furnace usually last?
On average, a Lennox furnace should last between 15 and 20 years. The length of time a Lennox furnace will last depends on various factors like proper maintenance, installation, and the environment in which the furnace is placed.
Proper maintenance includes routine tune-ups to check for any safety issues, leaks, or other mechanical defects. Failure to keep up with regular maintenance will considerably reduce the lifespan of any furnace.
Quality installation is also important, as any mistakes during the process could lead to problems down the road. The environment in which the furnace is placed also matters. Homes with high levels of dust, moisture, pets, and other pollutants may cause the furnace to wear down faster than if placed in a clean environment.
Additionally, some components of a Lennox furnace, such as pressure switches, are expected to be replaced at least every 5 years. Ultimately, the best way to ensure a lengthy lifespan for your Lennox furnace is to keep up with regular maintenance, avoid contaminants and other pollutants, and replace any necessary parts in a timely fashion.
Is Lennox high end?
Lennox is an HVAC manufacturer that focuses on top-tier quality. Their products use cutting-edge technology and have a reputation for long-term reliability. Their products come with a variety of features that can help you improve the comfort, energy efficiency and safety of your home or business.
The company offers a variety of price points, from budget to high end, with something for every budget. When it comes to high-end options, Lennox has premium air conditioning and heating systems, home automation systems and air purifiers.
They also offer energy-efficient systems that can save you money on energy costs. In short, Lennox is a leader in the HVAC industry, and their products offer high-end quality and performance.
How much do Lennox AC units cost?
The cost of Lennox AC units depends on several factors, including the size of the unit and its energy efficiency rating. Generally speaking, central air conditioners range from $2,000 to $10,000, with prices increasing depending on efficiency, size and special features.
There are also smaller window units available for around $100 to $400. It’s important to note that the purchase price is only the beginning – installation costs for Lennox units can range from about $2,000 to $4,000 on average.
The most efficient air conditioners from Lennox can cost upwards of $7,000. Ultimately, it’s important to take all costs into account, including energy efficiency and the power bills they’ll incur over the long run.
Further, Lennox offers many warranties and service plans that provide coverage and peace of mind. Contacting an HVAC professional is the best way to get an accurate estimate and choose the right unit for your home.
Is Carrier cheaper than Lennox?
It’s not always the case that Carrier is cheaper than Lennox. Both companies manufacture a range of HVAC products that range in price, efficiency, and features. As a general rule of thumb, Carrier offers more budget-friendly options, while Lennox offers top-of-the-line, energy-efficient models.
Ultimately, you’ll need to compare specific models to find out which is cheaper and offers more bang for your buck. Be sure to consider installation and maintenance costs, as these can add up quickly.
Additionally, if you’re looking to replace an existing HVAC system, the cost of removing and replacing the old unit must also be taken into account. Ultimately, the answer of which brand is cheaper will depend on the type of system you want and need.
