Trex RainEscape takes approximately 3-4 hours to install depending on the size of the area. The installation process generally involves measuring and cutting the Trex RainEscape components to fit the desired area before attaching them to the deck joists.
The Trex RainEscape products also offer a unique low-sloped installation option that makes installation even easier. After installation, the Trex RainEscape deck drainage system should then be covered with a waterproofing and deck covering membrane, either conventional roofing materials or a product such as Trex RainEscape Deck Protector.
If you are new to installing deck drainage systems, it is recommended to seek advice from professionals familiar with the best drainage methods. It is also advised to read the Trex RainEscape installation instructions and product user guide before starting the project.
Table of Contents
Is an under deck drainage system worth it?
Generally speaking, an under deck drainage system can be a worthwhile investment in the long-term. It has the ability to significantly reduce costs associated with water damage and provide a comfortable outdoor living space in the summer months.
An under deck drainage system can allow homeowners to use the outdoor living space beneath their deck without worrying about the potential elements, such as rain or snow. There are a variety of systems available, and many are relatively easy to install.
The most cost-effective option is often to install a drainage system under the joist of the deck, which allows the water to drip into the gutter, instead of dripping down the sides of the deck. Other systems, like gutter extensions and vinyl panels, can be more expensive, but are often much more effective.
Ultimately, the decision to invest in an under deck drainage system will depend on the homeowner’s budget and the intended use for the space beneath the deck.
How do you waterproof under Trex decking?
Depending on the resources you have and the scope of the project. Firstly, you should ensure that the framing underneath the deck is completely sealed with a waterproof sealant. This should be applied to all vertical joists, edges and other exposed joints, and is especially important if the decking is in a space prone to moisture.
After the underneath framing is sealed, the decking itself should be installed using screws that won’t corrode over time. It’s also important to leave a gap of at least an eighth of an inch between each board in order to allow water to escape.
Once the boards are installed, a sealant should be applied over the entire area to ensure that water does not become trapped underneath the decking. It’s important to choose a sealant that is compatible with your particular type of Trex decking, as some may be incompatible with different kinds.
Finally, a waterproof underlayment can be used between the decking and the framing. This will add an extra layer of protection against moisture and water getting into or staying underneath the Trex decking.
It can also provide additional insulation to help keep the decking cooler during hot weather.
By following these steps, you can effectively waterproof under Trex decking and help ensure its longevity.
How do you install under deck drainage?
Installing an under deck drainage system is a great way to create a dry, usable space beneath your deck. The process can be done in a few simple steps.
First, you’ll need to install the joist brackets to the deck joists. The joist brackets are designed to hold the vertical downspouts that will direct the water away from the deck. Once the brackets are in place, you can attach the vertical downspouts.
Next, you need to cut out a portion of the decking to the width of the brackets and downspouts. This will reveal the underlying OSB or plywood sheathing, which you can then attach the under deck drainage system to.
You’ll also need to install the gutter system on the underside of the deck. This will catch and channel water away from the deck and direct it down the downspouts.
Once the gutter system is in place, you can install the downspouts to the joist brackets and attach the membrane liner to the deck’s sheathing. The membrane liner will capture and carry water away from the deck and direct it safely away.
Finally, you can install the finishing trim around the downspouts and the perimeter of the deck. This will also help keep the under deck drainage system secure.
Installing an under deck drainage system can be a simple process with the right materials. Following this guide can help you enjoy the space beneath your deck for years to come.
Can you install Trex RainEscape without downspouts?
Yes, you can install Trex RainEscape without downspouts. Trex RainEscape is a system of channels, gutters, and downspouts designed to divert and disperse rainwater runoff away from your deck. Trex RainEscape channels are installed directly on the joists beneath the deck, and they do not require any downspouts in order to capture and divert water away from your deck.
Trex RainEscape also comes with additional accessories, such as beam coverings, zip ties, and downspout diverters, to help you customize your system and protect your deck from water damage.
What goes under Trex decking?
When installing Trex decking, it is important to use the correct materials. Underneath the decking, pressure-treated joists should be spaced 16” on center for residential decks and 12” on center for commercial decks.
Additionally, a layer of 1/2” or 3/8” CDX plywood should be installed over the joists to create a stable level surface for the Trex decking. When trimming the plywood to fit the shape of the deck, it is important to use a sharp, carbide-tipped blade.
Finally, use a minimum of a #6 or #7 treated lumber screw with pre-drill and countersink the fastener heads.
Should you put a moisture barrier under a deck?
Yes, you should put a moisture barrier under a deck. Putting a moisture barrier under a deck is an important step in building a safe, long-lasting deck. Moisture barriers are designed to keep moisture from penetrating your wood and causing it to rot, warp, or splinter.
They also help keep moisture from getting into the joists and support beams, which can cause similar damage. Moisture barriers come in a variety of materials, such as plastic sheeting, rubber, and PVC.
Depending on the size and design of your deck and the local climate, you may need a combination of several materials to adequately protect your deck from moisture. Installing a moisture barrier is also a good preventive measure against mold, mildew, and other problems caused by water entering your decking structure.
When it comes to installing a moisture barrier correctly, it’s best to consult a professional contractor. They can help you choose the right material and ensure that the barrier has been installed correctly.
Doing so will help keep your deck safe, secure, and long-lasting!.
What do you put under the ground of a deck?
Typically, when constructing a deck, there should be a layer of gravel or crushed stone base material beneath it. This provides a stable, even surface for laying deck boards as well as protection from soil moisture and potential wood rot.
The gravel also helps to ensure that the surface beneath the deck is level, consistent, and well-drained. Depending on the type of soil and environment, it may also be necessary to lay down a weed barrier to prevent the growth of plants beneath the deck.
Generally, a 3-4 inch layer of crushed stone or gravel topped with 1-2 inches of sand should be sufficient. Finally, the area should be raked smooth, packed down and watered.
What is Trex RainEscape made of?
Trex RainEscape is a below-deck drainage system made from UV stabilized polypropylene material. This material is designed to be durable, capable of withstanding many years of outdoor usage and various weather conditions.
It provides a clean and attractive way to manage roof deck drains for decks built with Trex Elevations steel framing products. The system includes components such as downspout connectors, deck drainage channels, troughs, and flanges.
The channels provide a low profile track for water to flow off the deck, and the hose runs along the perimeter to the rain gutter. The troughs, which are height adjustable, allow water to flow from one end of the deck to the other securely, and the flanges provide a point of contact for the channels to be fastened to.
Trex RainEscape is corrosion-resistant and able to withstand harsh environments. This system also comes with a limited lifetime warranty.
How does water drain from the track bed?
The water in the track bed drains thanks to the careful construction of the railway line. Most railway lines have a track bed that includes a base layer of crushed stone, which is known as ballast. The ballast is used to disperse the load and keep the track in place while allowing water to pass through it.
The ballast is typically placed on a slope that allows water accumulated from rain and snow to flow downhill. This helps to reduce the risk of rain and snow accumulating and creating a slippery layer on top of the track that can be hazardous for trains traveling at high speeds.
Additionally, most railway lines have drainage gates, or “spillways,” that are designed to catch and divert runoff from surrounding areas to prevent flooding. The drainage gates are usually located at the lowest point of the track bed so the water can flow down the slope and away from the track bed.
The water can then be carried away using a system of gutters, surface drains, and lower-level drains.
How does Trex decking drain?
Trex decking drains amazingly well because it has a slotted profile on its side that allows for water to gather and then dissipate in between the grooves and then exit. The Trex decking also has a unique spacer that helps promote natural drainage on the deck itself since it is designed with a space between each board.
The spacer also helps with air circulation and overall drainage. The Trex decking material itself is a composite material so it does not retain water in the same way that some other decking materials do, making it an ideal choice for decks in high moisture areas.
The Trex decking also has an integrated gutter system that helps to collect and divert rainwater from the edges and corners of the decking to further improve the drainage of this decking option.
Is Trex decking worth the cost?
Trex decking is one of the more expensive types of decking, so it pays to consider whether it is worth the cost. On the one hand, Trex composite decking offers several advantages that make it worth investing in.
It is incredibly durable and low maintenance, since it does not rot, warp or splinter. In addition, Trex has pioneered unique technologies that make their decking more resistant to fading, staining and scratching, as well as protected from mould and mildew.
Moreover, Trex decking is made from 95% recycled materials, making it an environmentally friendly choice.
On the other hand, there are some drawbacks to consider. While Trex is more expensive than other types of decking, it may actually be cheaper in the long run due to its higher durability and low maintenance requirements.
However, it can be difficult to find Trex decking materials in some areas, so you may need to shop around to find the best price.
Ultimately, whether Trex decking is worth the cost depends on your particular situation. If you live in an area with limited availability, it may not be the best option. However, if you are looking for a low maintenance, durable decking material and are willing to pay for the premium price tag, then Trex is certainly worth the cost.
What are the disadvantages of Trex decking?
Trex decking is one of the most popular decking materials on the market, but like any other material, it has its drawbacks. The main disadvantages to using Trex are its expense, maintenance requirements, and environmental impact.
Cost: Trex decking is often much more expensive than other decking materials due to its polymer content. Trex can be around twice as expensive per square foot when compared with cedar, redwood, and other organic materials.
Maintenance: Trex requires regular maintenance in order to look its best. It needs to be cleaned regularly to remove dirt and debris and can fade in direct sunlight. It also needs to be sealed or stained periodically to preserve its color and reinforce its protection from moisture and other elements.
Environmental Impact: Trex is composed of a combination of plastic and wood fiber, which makes it a form of composite decking. Using composite decking can have an ecological impact due to the resources it uses, such as energy and water.
It is also not biodegradable, so it can create environmental issues if it ends up in landfills.
Is a Trex deck a good investment?
Trex decks are a great investment for any home. Trex decks are constructed from recycled wood and plastic composites, making them a highly durable and renewable product that is perfect for outdoor use.
Trex decks are low maintenance and highly resistant to moisture and decay, which helps to minimize long term costs for upkeep and repairs. Additionally, Trex decks are attractive, come in a variety of colors, and can add significant value to your home if you ever decide to sell.
Plus, Trex decks are slip-resistant and fire-resistant, are easy to clean, and require very little maintenance, so you can enjoy them for years to come. With all these features, Trex decks are certainly worth considering when looking for an outdoor solution that is both attractive and practical.
Is Trex slippery when wet?
Trex decking material is composed of plastic and wood fibers so its surface is not as slick as traditional composite decking materials when it gets wet. However, just like most outdoor surfaces, it can become slippery when wet, so it’s important to use caution when walking on a wet Trex deck.
The product’s surface is textured which helps reduce the chance of injury from slip and falls in wet conditions, but it is not completely slip-proof. It also helps to regularly clean the Trex deck with soap and water and provide a non-slippery surface coating in areas that have a tendency to get wet and slippery.
Adding an anti-slip additive to your cleaning solution can also help to increase the traction of your Trex material.
