Adding an additional receiver to your DIRECTV service requires the purchase of an additional receiver – either through digital retail stores or directly from DIRECTV.
Once you have the additional receiver, the next steps depend on the type of receiver that you have purchased. It is important to check the product manual to ensure that you are following the correct installation steps.
For most DIRECTV receivers, you will need to connect the receiver to power, the TV, and to the satellite dish. It is important to ensure that all connections are secure and that nothing is loose. To connect the satellite receiver to power, you will need to plug the power cord into a power outlet.
If you are using the DIRECTV wall outlet adapter, plug the adapter into the wall outlet and then plug the power cord into the wall outlet adapter.
Next, you will need to connect the receiver to the TV. Currently, DIRECTV boxes usually come with a single HDMI cable to link the device to the TV. Connect the smaller end of the HDMI cable to the back of the receiver, and then connect the larger end of the HDMI cable to the HDMI port on the TV.
The last step is connecting the satellite dish to the receiver. This requires some basic equipment. First, if needed, use a drill to install mount lag screws in the wall or ceiling where you want your satellite dish to be installed.
Then, you’ll need a signal signal meter, screwdriver, two coaxial cables, and a pole brace or mast. Follow the instructions in the product manual for the specific steps.
Once you’ve done all the steps, you can now pair the new receiver with an existing receiver in your home network. This can usually be done from inside the DIRECTV app. Then, you are ready to enjoy your new device!.
Table of Contents
How do I connect a second DIRECTV receiver?
To connect a second DIRECTV receiver, you will need an additional coaxial cable and a power outlet. First, locate an available coaxial output on the wall near the first DIRECTV receiver, or use the splitter included with your first receiver.
Connect one end of the coaxial cable to the splitter. Then, connect the other end of the cable to the ‘Satellite In’ port on the back of the second receiver. Next, connect the power cable to the back of the receiver, plug it into an available power outlet, and press the ‘Power’ button on the receiver.
When the power light on the receiver turns on, it has been successfully connected. Finally, access the Menu Settings on the receiver and select ‘System Setup’. From there, select ‘Install System’, then ‘Point Dish’, and choose your satellite.
Make sure both receivers can access the same satellite, if not you may need to move it within the authorised range. Follow the on-screen instructions to complete the setup procedure. You should now be able to enjoy content on both DIRECTV receivers.
How many receivers can I have on my DIRECTV account?
The exact number of receivers you can have on your DIRECTV account depends on what types of receivers you are using. You can have a maximum of 8 receivers connected at the same time, with no more than 15 total devices connected to your account.
This includes both wired and wireless receivers. If you try to connect more than 8 receivers, your DIRECTV account will be locked. You will also be required to upgrade to a more advanced programming package in order to connect more than 8 receivers.
Additionally, the types of receivers you choose will impact the number of receivers you can have. For example, with the Genie HD DVR, you can connect up to 8 Genie Minis and up to 16 Client receivers.
Finally, if you have more than 8 receivers, you should consider that additional monthly costs may be applied by DIRECTV.
Do I need a DIRECTV box for every TV?
No, you do not need a DIRECTV box for every TV with DIRECTV service. You can connect a single DIRECTV HD DVR receiver to multiple TVs (up to 8) using coaxial cables and a splitter, which will allow you to watch different programs on any of the connected TVs.
You can also connect up to 4 additional TVs with the DIRECTV Wireless Genie Mini for access to the same program lineup as the DVR receiver. However, these devices are limited to a single program at once and can’t record.
If you want to watch and record different programs at the same time in different rooms, then you need to install a separate DIRECTV receiver for each TV.
Can I split satellite signal to 2 receivers?
Yes, it is possible to split a satellite signal to two receivers. This is typically done by using a device known as a satellite splitter. This device takes the single satellite signal and sends it to two receivers, usually through coaxial cables.
The splitter typically has input, output and control ports that allow you to adjust the signal strength and other settings. It is important to note that because the satellite signal is compressed, splitting it between two receivers can cause a significant reduction in the signal quality.
Therefore, it is recommended that you use a high-quality splitter to ensure that the signals remain strong and clear.
How do I connect two satellite receivers to one dish?
Connecting two satellite receivers to one dish is relatively simple. First, you will need to determine whether the receivers can be used on the same network. If so, you will need two coaxial cables, one for each receiver, which will be connected to a two-way splitter.
This splitter will allow each receiver to access the same signal while still having the ability to control the individual receivers. Once both cables are connected, you can then attach the coaxial cable from the splitter to the dish.
Once everything is connected, depending on whether the satellite is a single LNB or dual LNB, you will need to set the output switch. If it is a single LNB, you will need to set it to the appropriate output for each receiver.
If it is a dual LNB setup, you will need to set the switch properly so each receiver is receiving the same signal. Lastly, you must ensure that the receivers are properly calibrated and that the appropriate setting has been chosen.
Once all of these steps are followed, you should be able to connect two satellite receivers to one dish.
Can one directv receiver run 2 TVs?
Yes, one DirecTV receiver can run two TVs. It requires either a coaxial cable split, which splits from a single outlet or an HDMI splitter, which takes one signal and splits it into two. The coaxial cable split will require a separate cable to run from the DirecTV receiver to each TV while the HDMI splitter is only connected to the receiver and the TVs are connected via HDMI cable.
Once the signal is split, the DirecTV receiver can be used to operate both TVs.
Can I have directv stream in two homes?
No, it is not possible to have one DIRECTV Now account streamed in two different homes unless you have multiple accounts. Each DIRECTV Now account is intended to be used in one home at a time. Multiple accounts may be created with different payment information, though accessing DIRECTV Now at the same time in different homes with the same account may be limited due to licensing restrictions.
Additionally, in order to avoid possible data charges, the same Wi-Fi connection should not be used in both homes.
Does DIRECTV charge for extra receivers?
Yes, DIRECTV does charge for additional or extra receivers. The fee varies depending on the type of receiver you have, as well as its features. Generally, additional receiver fees range from $7. 00 to $15.
00 each month. Additionally, you may have to pay a one-time fee for activation or upgrade to a certain type of receiver. To avoid additional charges, you may be able to opt for a package that includes additional receivers at no additional cost.
Customer service representatives can provide detailed information regarding additional receiver fees and activation charges.
Do I need a box for each TV with DIRECTV?
Yes, you need a box for each TV that you have with DIRECTV. The DIRECTV box allows you to access the satellite signal and decode the programming for each individual television. Without the DIRECTV box, you won’t be able to watch anything.
Furthermore, you may run into compatibility issues if you try to use an old or outdated box with a newer model of television.
How much is family package on DIRECTV?
The DIRECTV family package offers more than 50 family-friendly channels and is available for a promotional price of just $29. 99 per month for 12 months, plus taxes and Regional Sports Network fees. It includes the greatest variety of family programming with over 50 popular digital stations like Disney Channel, Nickelodeon, Cartoon Network, ABC Family, Disney Junior, Nick Jr.
, Discovery Family, Hallmark Channel—and more! Plus, with the all-included Genie HD DVR, you can record up to five shows at the same time and store up to 200 hours of HD content. Plus, with the DIRECTV mobile app you can watch shows on your tablet, laptop or smartphone, and with Parental Control you can customize the content your family can access.
Can two households share DIRECTV?
Yes, two households can share DIRECTV service. However, DIRECTV does not officially support the sharing of service between two households. If the households decide to share service, they will need to be careful to follow the terms and conditions of use.
For example, both households will need to agree to only use the service for personal, noncommercial viewing. The households may also need to purchase two accounts to ensure that both addresses are covered.
Additionally, both households will need to be aware of DIRECTV’s installation fees, usage caps, and other stipulations in the service agreement. Finally, it is important to remember that sharing service between two households is a violation of the DIRECTV terms and conditions, and thus could lead to a loss of service or other consequences.
For these reasons, households should carefully consider the potential risks of sharing service before doing so.
Can I have DIRECTV STREAM in two homes?
Yes, you can have DIRECTV STREAM in two homes. With DIRECTV STREAM, you can access your DIRECTV content on two devices in two different houses. All you need to do is sign in to both devices using the same username and password.
It works with iOS, Android and Kindle Fire devices. All of the shows, movies and channels you recorded or purchased from DIRECTV can be streamed in both homes. However, only one of those devices can be used at the same time.
In other words, if one person is streaming a show on one device in their home, someone in the other home will not be able to stream the same show on their device. Also, for those who have access to live TV channels, those are limited to one home.
Does DIRECTV require a box for each TV?
No, DIRECTV does not require a box for each TV. With the latest Genie HD DVR, you can connect up to 8 TVs and record up to five shows at once. All TVs connected to one DIRECTV Genie HD DVR will be able to access the same recorded shows, On Demand content, and live channels.
However, the only way to get the “Whole-Home” experience, with access to the same channels, recording and On Demand content on all TVs, is to connect each TV to a separate Genie Receiver. You can either rent Genie Receiver models from DIRECTV, or you can buy them elsewhere.
How many TVs can you hook up to DIRECTV?
The exact number of TVs you can hook up to DIRECTV depends on the type of DIRECTV receivers you have, as well as the video sources available in your home. For example, if you have a standard DIRECTV receiver and an HDTV in your home, you can hook up one TV to it.
However, if you have an HD DVR Receiver in your home, you can hook up two TVs to it – one connected to the HDTV receiver and a second one connected to the HD DVR receiver. For more advanced setups, such as a Whole-Home DVR setup, you can hook up up to 8 TVs in total.
With this setup you can use both Genie and HR24 HD DVRs to access one primary TV, up to 6 additional TVs, plus 2 TVs which can access all of your shows from any room in your home.
