Yes, Hardie board siding can come in 4×8 sheets. Hardie board siding, also known as cement board siding, is a type of siding made from cement and cellulose fibers. This type of siding has become increasingly popular due to its durability, fire resistance, and ability to withstand extreme weather conditions.
Hardie Board siding is available in a variety of sizes, shapes, and colors. Hardie board siding can come in a 4×8 sheet as well as 4×9, 4×10, and even 5×10 sheets. Hardie board also offers a wide variety of textures, from smooth to wood grain and even textured stucco patterns, to help match the style of any home.
It is important to note that the installation of Hardie board siding is different than other siding types so make sure that the installer is well-versed in Hardie board before attempting to install it.
Additionally, Hardie board siding should be installed in accordance with local building codes.
How do you install 4×8 sheets of Hardie board?
Installing 4×8 sheets of Hardie board is relatively simple and can be accomplished with a few basic tools and supplies.
To begin, gather necessary materials, including Hardie board sheets, a drill, an awl, and screws that are long enough to penetrate through the Hardie board and securely into the wall. You will also need a miter saw, tape measure, and level.
Before installing the sheets, measure your wall and make sure the Hardie board sheets will fit. Cut the Hardie board to size if necessary and double-check the measurements.
Once the measurements are correct, carefully lift the Hardie board into position and secure with two screws, positioned six inches apart. Do not drill the screws all the way through the board yet.
Next, use a level to ensure the board is level and straight, paying special attention to corners. Adjust if necessary and then secure the remaining screws. Once all screws are secure, drill the remaining screws all the way through the board.
Finally, drill holes in the Hardie board along the wall where a fastener needs to be secured. Be sure to use the appropriate size of screws and to not overdrive them, as this can cause damage to the Hardie board.
With these simple steps, you can install 4×8 sheets of Hardie board with ease.
What sizes does Hardie board come in?
Hardie board comes in a variety of sizes, with the most common sizes being 4’x8′, 4’x9′ and 4’x10′. Additionally, Hardie board products can also come in panels that measure 4’x12′ or 4’x16′. Most commonly, this board is sold in panel thicknesses ranging from 1/4″ to 7/16″.
However, special orders have been made for customers that have required panels up to 1″ thick. For customers looking to apply Hardie board in bathrooms, mud rooms or other areas that may be exposed to moisture, Hardie board does offer a water-resistant backer board that measures 1/4″ thick and panels that are 4’x4′ and 4’x8′.
How much does a 4×8 sheet of Hardie siding weight?
A 4×8 sheet of Hardie siding typically weighs roughly 75 lbs. However, this weight can vary depending on the type of Hardie siding you choose. For example, HardiePlank Lap Siding weighs about 4. 4 lbs.
per square foot, which means that a 4×8 sheet would weigh about 73. 6 lbs. HardieShingle Siding weighs about 4. 5 lbs. per square foot and a 4×8 sheet would weight 76. 8 lbs. HardiePanel Vertical Siding weighs about 5lbs.
per square foot and a 4×8 sheet would weigh roughly 80 lbs. Lastly, HardieTrim Boards weigh approximately 3. 7 lbs. per square foot, so a 4×8 sheet would weigh around 59. 2 lbs. It is important to note that the weight will be different depending on thickness and the type of Hardie siding.
Does Hardie board need 2 coats of paint?
The answer to this question depends on what kind of Hardie board is being discussed and what type of paint is being applied. Generally speaking, Hardie board is a cement fiber siding product made with Portland cement, binders, and Eon fiber glass reinforcements.
Since this product is already very durable, it typically doesn’t require two coats of paint. However, if you are looking to achieve a specific color or finish, or are going with a darker shade, it is recommended to apply at least two coats of paint.
Additionally, if you live in a climate with extreme temperatures and/or frequent precipitation, it may also be advisable to use two coats of paint to ensure the Hardie board is fully protected. Ultimately, it is best to consult a professional contractor or siding specialist to determine how many coats of paint are necessary for your specific application.
What is the difference between Hardie board and cement board?
Hardie board, also known as cement board or cement bonded particleboard (CBPC) is a substrate material used in construction for tile and other finishes. It is composed of Portland cement, sand, and fiberglass mesh that is compressed into sheets or panels.
Hardie board is durable, rot-resistant, and fireproof, making it a great choice for areas that are exposed to weather, moisture, and extreme temperatures. It is also resistant to cracking, mould, and pests.
Cement board is a composite material made up of cement and reinforcing fibers. It is typically used as an underlayment or covering for walls, floors, and roofs, and typically has a thin layer of mortar on either side.
As compared to Hardie board, cement board is less expensive, stronger, and more flexible. It is used in areas that require a waterproof barrier, such as on shower walls or around tubs and outdoor kitchens.
Unlike Hardie board, cement board is not as rot-resistant and is more prone to cracking.
What is the standard size of a fiber cement board?
Fiber cement boards are typically available in a variety of sizes. The standard size for horizontal siding is 4 feet by 8 feet, and for vertical siding is 4 feet by 10 feet. Fiber cement boards can also be found in other sizes such as 4 feet by 12 feet, 4 feet by 9 feet, and 4 feet by 16 feet.
These boards also come in various thicknesses, ranging from 1/4″ to 5/8″. For large projects, custom sizes are available and can be ordered from a manufacturer. Additionally, different textures, colors, and finishes can be applied to meet individual design needs.
What was the main problem with fiber cement board siding?
The main problem with fiber cement board siding was that it had a tendency to crack, chip, warp, and become brittle over time due to exposure to moisture and other elements. This type of siding was not designed to be as weather-resistant as other types of siding and would not hold up well in climates with a lot of rain, snow, or humidity.
Additionally, fiber cement board siding was more labor-intensive to install due to its weight and had to be installed in a particular way to avoid cracking. Lastly, fiber cement board siding was also known to contain potentially harmful silica dust particles, which could be an issue for homeowners who are concerned about indoor air quality.
How many pieces of 7.25 Hardie siding in a square?
This is a difficult question to answer without more information. The number of pieces of 7. 25 Hardie Siding needed for a square depends on a variety of factors, such as the size of the square (measured in square feet or meters), the type of installation (vertical or horizontal) and the model of siding.
Generally, it takes approximately 5-20 pieces to cover a square, with the exact number varying based on the aforementioned factors. For the best estimate, it is recommended to consult a professional siding installer or a supplier familiar with the product.
Is Hardie board cheaper than siding?
The cost of hardie board siding compared to other types of siding can vary depending on a few factors. Hardie board siding is generally a bit more expensive than other types of siding such as aluminum or vinyl because it is a more durable, longer lasting option.
However, the cost of Hardie board varies depending on the size and color of the siding, as well as the brand. Hardie board square footage costs usually range from $2. 50 – $7. 50 per square foot installed, with an average cost of $5.
75 per square foot. Other siding materials may cost between $1. 50 and $5. 00 per square foot, so in general, Hardie board is slightly more expensive than other siding. It is important to weigh the cost of the different types of siding against their longevity, as Hardie board siding does have a longer lifespan than cheaper alternatives.
How much does it cost to put Hardie board on a 1500 square foot house?
The cost of putting Hardie board on a 1500 square foot house depends on a few factors such as the size of the house, labor costs, installation methods, additional materials, and the site conditions. Generally, the materials cost can range from $1,000 to $2,500 and the labor cost can range from $1,000 to $2,500.
However, these prices can be higher in certain areas and depending on the complexity of the installation process. Factors like additional deck flashings, step flashings, ladders, scaffolding and extra materials can also add to the total cost.
On average, an installation of Hardie board on a 1500 square foot house can cost up to $6,000.
What is better Hardie board or vinyl siding?
The decision between Hardie board and vinyl siding ultimately comes down to personal preference, budget, and the climate in which the house is situated. Hardie board is a building material made from cement fibers, which makes it extremely durable—able to withstand extreme temperatures, fire, wind, and whatever Mother Nature throws its way.
Furthermore, Hardie board has a much longer lifespan than vinyl siding, often outliving a building by several decades. As for the aesthetic, Hardie board provides more options for texturing and finishing, so it can come primed for painting or in a variety of stylish shades.
Vinyl siding, on the other hand, is made from plastic and requires little upkeep, as it can be easily rinsed off with a hose. While it is not as durable as Hardie board and not as resistant to fire or strong winds, it’s a much more affordable option and gives homeowners the color options they desire.
In short, Hardie board is a dramatically more durable option that is customizable to whatever look you desire, however it comes at a hefty price. Vinyl siding, on the other hand, is much more affordable and provides more color choice, but not the same level of protection.
Does Hardie board increase value of home?
Hardie board siding can certainly increase the value of a home depending on the area, condition and age of the home, as well as other factors. It is most certainly true that Hardie board siding is one of the more desirable options when it comes to exterior siding, as it is long-lasting, energy efficient and low-maintenance.
Studies have shown that homes with Hardie board siding have higher resale values than those with other forms of siding. Switching to Hardie board siding not only increases the home’s resale value, but also enhances curb appeal and gives the home a fresh look.
Additionally, Hardie board siding lasts much longer than other forms of siding, which means that it could potentially add even more value through the years.
What is the most inexpensive exterior siding?
The most inexpensive exterior siding is vinyl siding. It is a popular choice for homeowners because of its relatively low cost, low maintenance, and wide range of design options. Vinyl siding is water and fade resistant and is also fire rated (Class A).
It is also very easy to install and comes in panels that fit together in simple overlapping configurations. Vinyl siding can be painted in almost any color and once installed is virtually maintenance free.
It is also insect and rot resistant, making it a great choice for harsher climates. Finally, vinyl siding is available in various thicknesses, so it can be more resilient against hail and other weather phenomena.
Is Hardie siding tax deductible?
The answer to this question depends on what type of Hardie siding you have installed and the purpose for which it was installed. Generally, if the Hardie siding was installed for the primary purpose of increasing the value of your home, then it may be considered a capital improvement to the property and thus be tax deductible.
However, if the Hardie siding was not installed primarily for this purpose, then it may not be tax deductible. You should speak with a qualified accountant or tax lawyer to determine if your Hardie siding is eligible for a tax deduction.
