No, Caterpillar no longer makes the 6090 model. The 6090 model is a discontinued track-type tractors, which were mostly used in the mining industry. It was manufactured by Caterpillar Inc. from 1994 to 2006 and was the last member of the 6x series of tractors.
The 6090 had a 530-horsepower engine, a maximum speed of 18 miles-per-hour, and was capable of carrying a load up to 6. 7 tons.
The 6090 was replaced by the Caterpillar factory with the Cat D10T, a track-type tractor which is more fuel-efficient and boasts higher power at 790 gross horsepower. The D10T is capable of speeds up to 24 mph and can carry up to 12.
6 tons. It is also designed with advanced emission standards in order to meet Tier 4 requirements. Caterpillar developed this model to operate with technology, such as Adaptive Control Technology, Programmed Power Management, and Delayed Work Restart, which all enhance fuel efficiency.
Table of Contents
How much does a caterpillar 6090 excavator cost?
The cost of a Caterpillar 6090 excavator will depend on a variety of factors, including its age, condition, location, and any additional features or attachments it may have. Generally, the prices for a used Caterpillar 6090 excavator can range from as low as $60,000 to as much as $180,000 or more.
If you are looking to purchase a new Caterpillar 6090 excavator, the cost can range anywhere from $250,000 to over $400,000. Additionally, you may need to factor in additional costs depending on the type of maintenance and repairs it may need or any additional attachments or parts that you may need to purchase.
What engine is in a Cat 6090?
The Cat 6090 is a powerful, heavy-duty excavator made by Caterpillar. It runs on a Cat C27 ACERT engine. This engine is a turbocharged, aftercooled diesel engine, with a displacement of 16. 9 litres, net power output of 870 horsepower, and a maximum torque of 4,785 foot-lbs at 1,400 rpm.
The engine meets EPA Tier 3 emission regulations, and has a four-valve combustion chamber that helps it to run more cleanly and efficiently. The Cat C27 ACERT engine has a four-stage air-inlet system, electronic engine controls and engine monitoring systems, and a fuel injection system that helps to optimize performance.
The power output of the engine is also adjustable, allowing it to be tailored to the application and conditions. With this engine, the Cat 6090 provides maximum power, performance, fuel efficiency and reliability.
How heavy is a cat 6090?
The average weight of a cat 6090 varies significantly depending on the breed, size and age of the cat. Generally, small cats weigh between 8 and 10 pounds, while large ones can be as heavy as 15 to 20 pounds.
Male cats are larger and heavier than female cats and are typically between 10 and 15 pounds. Female cats tend to weigh between 8 and 12 pounds. The age of the cat also affects its weight, with older cats weighing somewhat less than their younger counterparts.
It is important to take into consideration the size, gender and age of the cat when determining its average weight.
How tall is the caterpillar 6090 fs?
The caterpillar 6090 FS is the largest surface mining shovel from the Caterpillar family of machines and it has an operating weight of 17 quartic yards (coin). The height of this machine is approximately 348 inches, or 29 feet.
This machine is able to reach a digging depth of up to 219 feet. It also has a maximum reach of 203 feet with an orientation angle of 80 degrees for maximum flexibility. The machines has also been designed with a relatively small footprint, making it easier to maneuver in tight mining conditions.
Overall, this machine is incredibly powerful and efficient thanks to its capability to dig to depths not previously reached, making it an invaluable asset in the mining industry.
What is the largest excavator in the world?
The world’s largest excavator is the Liebherr RH400, built by the German company Liebherr Group. It has a max power of 5380 kW and a bucket capacity of 50 cubic metres, meaning it can carry over 130 tons at a time.
This excavator was custom designed for a project in Canada to easily move oil sands and soft rock materials in tonnes. It is the largest hydraulic excavator in the world and stands 10 meters tall. As well as having an impressive max operating weight of 744 tonnes and an arm length of 25 meters, it also has an impressive reach of 40 meters.
This monster of a machine is powered by two Cummins QSK78 diesel engines, featuring 16 cylinders and four turbochargers, and is thought to be the most powerful mechanical digging machine ever built.
How much does a CAT 6040 weight?
The CAT 6040 Excavator is a medium-sized excavator made by Caterpillar. According to the manufacturer, the CAT 6040 has an operating weight of 50,352lbs (22,830kg) with engine, canopy and long dipper arm, and 47,870lbs (21,707kg) with adding the air conditioning option and counterweight, or a weight of around 41,322lbs (18,754kg) with short dipper arm.
The CAT 6040 is an environmentally friendly machine, equipped with electric-powered hydraulic, pollution control and advanced all-rounder performance. This machine has increased performance, increased fuel efficiency and quieter operations.
The excavator also features an advanced technology of variable power settings, adjustable speed, variable flow, adjustable proportional control and improved visibility. The top swing speed of the CAT 6040 is 9rpm, while its maximum drawbar pull is 28,071lbs (12,740kg).
How big is the bucket on a cat 6090?
The bucket on a Cat 6090 has a bucket capacity of 5. 4 cubic yards (4. 1 cubic meters). The bucket can also be equipped with a variety of optional tools designed to enhance productivity. These include clamshell, coal and rock buckets, as well as grapple buckets and 4-in-1 buckets.
The Cat 6090 has a maximum pin height that reaches 17. 2 feet (5. 2 meters) and a dumping height of 11 feet (3. 3 meters). With an overall operating weight of 47,792 pounds (21,711 kilograms), the Cat 6090 is well-suited for a variety of tough excavating tasks.
How big is a CAT 6040 bucket?
The bucket size for the CAT 6040 ranges from 1. 4 – 4. 8 cubic yards depending on which configuration you choose. The largest option comes with a 4. 4 cubic yard bucket and a 4. 0 yard backhoe composed of both single and double bottom lip configurations.
In terms of physical size, the bucket is 13 feet long, 8 feet wide and 5 feet tall. The total weight of the CAT 6040 with the 4. 4 cubic yard bucket is 20,062 lbs (9,093 kg). This machine can move materials quickly and efficiently, even in narrow and cramped locations, thanks to its small size, precise maneuverability and powerful hydraulics.
How tall is a Cat excavator?
The Royal Cat® Excavators vary in size from the small compact EC55B which is 7. 2 feet tall up to the larger 70-ton models such as the 385B which is approximately 26 feet tall. The 70-ton excavators are typically used for deep excavation and heavy-duty projects such as dredging, quarrying, and demolishing foundations.
The smaller models, like the EC55B, are more suited to work in tighter spaces and lighter-duty jobs such as trenching, grading, and land clearing. Each model has several components such as buckets, blades, and booms that can affect its overall height.
The Royal Cat Excavators also come in a variety of styles such as crawler, wheeled, and trackhoe to suit any job.
What is the most powerful Cat engine?
The most powerful Cat engine is the Cat 3512C HD Marine Propulsion engine. This powerhouse features a maximum power rating of over 2,400 bhp at 1,600 rpm, making it one of the most powerful marine propulsion engines on the market today.
Along with its impressive power output, the Cat 3512C HD also boasts a robust design and advanced emission control technologies, allowing it to deliver reliable performance and low emissions. The Cat 3512C HD was designed specifically for marine applications, meaning it is rugged and reliable enough to stand up to heavy duty marine conditions.
With its impressive power output, robust design, and low emissions capabilities, the Cat 3512C HD is the most powerful Cat engine available.
What is the Cat motor ever made?
The Cat Motor was a type of aircraft engine made by the Catenary Manufacturing Company (CMC) during the 1940s for use in vintage and modern aircraft. This engine was used in a variety of vintage and modern aircraft, from WWII military planes and crop dusters, to later super-light aircraft.
The Cat Motor was a 4 cylinder air-cooled engine, and was constructed from high-strength alloys and aluminum, allowing it to operate at high speeds and temperatures. Its design featured a single-piece cylinder barrel, overhead camshaft, and a radial valve arrangement.
The engine offered good fuel economy, and its unique weight distribution made installation easy in aircraft that had limited space. The Cat Motors delivered exceptional performance, with a maximum power output of up to 110hp at 3,450rpm.
The design allowed for easy maintenance and modification, with its detailed instruction manual. The Cat Motor was the engine choice of many famous warbirds, including the Focke Wulf Fw190 and Supermarine Spitfire.
It was also used in a variety of kits and light aircraft such as the Kitfox, Hummel Bird, Gypsy Hawk, Legal Eagle, and Zlin Aviation Z-226. In recent years, the Cat Motor has experienced a resurgence in popularity thanks to its simple design, durability, and performance.
It is highly sought after for vintage aircraft restoration projects, as well as for use in custom-built super-light aircraft.
Does Cat still make forestry equipment?
Yes, Cat still makes a wide range of forestry equipment today. Cat offers everything from wheeled and tracked feller bunchers to harvesters and skidders, as well as other forestry attachments to expand the capabilities of their forestry machines.
Cat forestry equipment is designed with efficiency in mind, helping to maximize efficiency, improve environmental sustainability, and increase the productivity of your forestry operation. Cat customer service and support is also available to help you with maintenance, repair, and parts ordering needs.
Did Cat stop making truck engines?
No, Cat (Caterpillar) continues to manufacture truck engines. Cat truck engines are designed to be durable and provide optimal performance for a range of applications. With a range of engine models ranging from 59 to 1576 horsepower, Cat truck engines are used in applications from transportation, construction, and forestry, just to name a few.
Cat engines offer advanced emissions technologies, reliable output, and fuel efficiency. The company continues to invest in research and development and manufacture engines that offer the best performance and value.
Does Cat still build engines?
Yes, Caterpillar Inc. (also known as CAT) still builds a variety of engines for a wide range of industries. Caterpillar is well known for producing high-quality diesel engines for heavy-duty on-highway and off-highway vehicles and equipment.
They are used in construction, mining, industrial, agricultural, and forestry applications around the world. Their extensive engine offering includes power outputs ranging from 13. 5 HP to 2,150 HP, with multiple configurations and options.
In addition to diesel engines, Caterpillar also manufactures and produces natural gas, dual fuel, and electric power options for their customers. On top of that, the company produces a wide selection of marine engines for use in marine vessels, power generation, and propulsion applications.
All of Caterpillar’s engines are designed for outstanding operation and low fuel consumption to provide exceptional value for the customer.
