Dropping a phone in water is never a good thing, but the outcome ultimately depends on the type of water your phone was submerged in and how long it was in the water. If your phone was submerged in clean water (not seawater, pool water, etc.
), it may still be salvageable after being taken out of the water quickly. Immediately remove the back cover, battery, and SIM card if applicable. Then, dry all of the parts with a cloth and leave them to air-dry completely in a warm, well-ventilated area.
After all parts are completely dry, reassemble them and turn on your phone to see if it is still working.
If your phone was submerged in other substances such as seawater, pool water, or other liquids with contaminants, these substances may corrode the phone’s electrical components and cause permanent damage.
If you suspect any liquid other than plain water has been spilled on your phone or it was left in the water for a long period of time, the devices may need to be cleaned and serviced by a professional before being used again.
Table of Contents
What to do if I dropped my phone in water but it still works?
If you dropped your phone in water but it still works, the first thing you should do is turn it off and remove the battery, if possible. After that, you should dry your phone as much as you can using a clean cloth or paper towels.
Your battery and other components should be left to air dry, preferably overnight. Once it’s dry, try turning your phone back on and see if it works. If it doesn’t, you may need to take it to a repair shop or contact the manufacturer.
If your phone turns on but doesn’t seem to be working correctly, you may need to reset it and back it up so your data is safe. In some cases, the damage caused by water may be too extensive, and you may need to replace your phone.
How long can a phone be in water and still work?
The answer to this question depends on numerous factors, such as the type of phone and the length of exposure to water. Generally speaking, iPhones and other waterproof phones may survive submersion in water for up to 30 minutes, depending on the depth.
However, if the exposure is longer than this, or the water is contaminated (i. e. salt water or chlorinated water) then the phone may suffer permanent damage. Non-waterproof phones are much more vulnerable to water exposure and will likely suffer irreversible damage after just a few minutes in water.
Additionally, the inner workings of a phone (including the battery, SIM card, and charging port) can be quite delicate, and can suffer permanent damage from even minimal exposure to water. So, it is best to err on the side of caution and avoid exposing any phone to water for extended periods of time.
Can a water damaged phone fix itself?
No, a water damaged phone cannot fix itself. Water damage can cause irreversible damage to the internal components of a phone, including corrosion and damage to the motherboard, RAM, and other electronic components.
Depending on the extent of the damage, some phones may be completely unsalvageable and will require a replacement. To fix a water damaged phone, a qualified technician must open the phone and assess the damage and repair any malfunctioning parts.
Furthermore, they may need to use special equipment to dry and clean the phone’s internal components to prevent further damage. In some cases, they may need to replace damaged parts with new, compatible parts.
If the phone was submerged in water, parts that were submerged in liquid may need to be completely replaced. Repairing a water damaged phone requires specialist knowledge and expertise and is an expensive fix that is not always successful.
How long should I wait to plug my phone in after dropping it in water?
Anytime you drop any electronic device, whether it is a phone, computer, tablet, or any other device, in water it is important to immediately turn it off, avoid pressing any buttons, and to dry it off as much as possible.
However, it is essential to wait at least 24 hours before plugging the device in, allowing it ample time to dry out completely, which helps prevent any long-term damage or permanent malfunctioning. It is not recommended to even attempt to power it on during the waiting period, as this can cause further damage.
During this waiting time, removing the battery or any other removable parts, such as an SD card, can help to enhance the drying process and ensure it is completely dry before plugging it in. Additionally, it is worth considering bringing the device to a professional for further inspection, as it is important to ensure there is no underlying damage, even if it appears to be functioning correctly.
Will water eventually come out of phone?
No, water will not come out of a phone. A phone is a device designed to provide access to technology that allows a person to make calls, access the internet, and interact with various applications and features.
It is not designed to contain or move water. In fact, exposing a phone to water in any way can be very damaging and can cause it to malfunction, stop working, or even break completely.
Can I dry my phone with a hair dryer?
No, you should not use a hair dryer to dry your phone as it could damage the device. Instead, you should use a microfiber cloth or towel to absorb any moisture on the outside of the device. You can also use an absorbent pouch, such as silica, calcium chloride, or even uncooked rice, to soak up moisture from the inside of the phone.
Once the phone is almost dry, do not attempt to turn it on or plug it in. Allow the phone to air-dry completely before attempting to use it. Also, when drying your phone, make sure not to use an extreme temperature, as high heat from a hair dryer could cause even more damage by melting internal cables or other circuitry inside the phone.
Will my phone dry out on its own?
Your phone may eventually dry out on its own, but it is not recommended to wait for this to happen as the longer you wait, the greater the risk of damage to your phone. The best course of action is to immediately remove the battery if applicable, dismantle the phone and separate the wet components, and then try to dry the components in a safe environment.
If the phone was submerged in liquid, then you should use isopropyl alcohol or electronics-safe cleaning solution to clean it. It is best to use a synthetic cloth and very gently rub away any visible dirt, then rinse with clean water and dry with a cloth.
Once the components are all dry, you can begin to reassemble the phone. If you turn on the phone before all the components are completely dry, it can cause damage, so it is important to wait for it to be fully dry before turning it on again.
How do you save a wet phone?
If your phone has been exposed to water, taking the correct steps to dry it off and save it from further damage is important.
1. Try to turn it off and remove the battery as soon as possible to prevent an electrical short.
2. Dry off the phone as much as you can with a soft cloth, then open the back cover of the phone and let it sit upside-down on a dry towel to allow any remaining liquid to drain out.
3. Use a hairdryer on the cool setting to blow-dry the phone for 10 to 15 minutes.
4. Fill a container with uncooked rice or silica packets and place the phone in the container so it is completely submerged by the rice.
5. The rice helps to draw out any remaining liquid and disperse it in the container.
6. Let the phone sit in the container of rice for 24-48 hours.
7. Place your phone in a sealed plastic bag containing desiccants such as silica gel packs. Silica gel packs will absorb excess moisture in the air and protect your phone from corrosion.
8. Inspect the phone after 24 hours and if it looks ok, you can try powering it up. If it’s still wet, leave it for another 24 to 48 hours.
9. If your phone does not respond, take it to a professional electronics repair shop and they can help protect your phone from further water damage.
How do you know if your phone has water damage permanently?
It can be difficult to know if your phone has permanently suffered water damage without the help of a professional. If you suspect that your phone has been exposed to water, the first thing you can do is inspect the outside for signs of corrosion, discoloration, or any other fluid residue.
If you do not observe any signs of corrosion or discoloration, you can turn on the device and check for any changes in performance or indications of a short circuit. If your device remains operational, there still may be internal water damage that requires professional attention.
An experienced technician can inspect the electronic components and take appropriate action to ensure the safety and longevity of the device.
How long does it take for a water damaged phone to dry?
It typically takes anywhere from 24 to 48 hours to dry out a water-damaged phone. The amount of time it will take to fully dry out depends on a variety of factors, such as how wet the phone became, the temperature, and the airflow of the environment it is in.
It is important to remember that drying a water-damaged phone isn’t a quick process and requires patience.
First, remove the battery and any other removable components of the phone. Separately, dry off any components with a clean cloth. Next, it is important to turn off the phone, as any on-going current or voltage can cause a short circuit due to the water damage.
Get a container of compressed air and blow out the ports and openings of the phone to remove any trapped water. Then, put the phone in a container filled with uncooked rice or silica packets so that it can absorb any remaining moisture.
Finally, turn the phone on to test if it is working and make sure that the phone is dry.
It is important to keep in mind that drying a water-damaged phone requires patience and proper technique. Follow the instructions above to ensure that your phone dries out safely and successfully.
Should I turn off my phone after water damage?
It is always a good idea to turn off your phone after it has been exposed to water damage, as it could cause further damage and make the repair process more difficult and costly. Turning off your phone ensures that no further damage is done while the device is drying out.
It’s also a good idea to remove any trapped water in the ports and open the device, if possible, to allow drying to take place. Additionally, if your phone has suffered damage from liquid contact, you should take it to an authorized repair center as soon as possible, as water is capable of damaging other components of the phone even after it has been turned off.
How long should I let my phone dry out?
Depending on the severity of the water damage, you should let your phone dry out for at least 24 hours. This should give the phone adequate time to absorb and evaporate any residual moisture still trapped inside.
Prior to powering on the device, you should also have a professional inspect the internal components to make sure there is no long-term damage. If the damage is substantial, you may need to replace some of the hardware components, but letting your phone dry out for 24 hours should be the first step.
It’s also important to note that you should never use a hair dryer or other form of heating appliance to speed up the drying process, as these can cause additional damage.
How do I dry out my phone quickly?
If you need to dry out your phone quickly the best way to do so is to use a vacuum cleaner. Put the nozzle of the vacuum cleaner near your phone and turn it on. The vacuum will suck out all of the moisture on your phone and get it dry quickly.
You should make sure the vacuum is on the lowest setting possible & that you do not hold the nozzle too close to your phone as you could damage it. Additionally, use a lint-free cloth to gently pat the phone after to get rid of any remaining moisture.
Once it’s dry, place the phone in a warm area for about 15 minutes and then try turning it on. If your phone does not turn on, contact a technician.
What should I do if my phone gets wet?
If your phone gets wet, the first thing that you should do is to turn it off immediately and take out the battery if you can. Doing this prevents any electrical components in the phone from shorting out due to the water.
Once you have done this, you should dry the exterior of the phone as best you can with a clean cloth.
Next, it is important to try and remove as much of the water as possible from inside the phone. To do this, you can use a vacuum cleaner with a brush attachment, or you could try placing the phone in a bag of dry rice to absorb the moisture.
If you aren’t confident doing this yourself, then you can take your phone to a professional service that specializes in phone water damage.
Once the phone is dry, it is important to check all of the components of the phone, such as the charging port, headphone jack, and buttons, and make sure that none have been damaged. If any of the components appear to be damaged, then you may need to find a replacement component.
If your phone does not appear to be working after drying out and you are unable to find a replacement component, then you may need to replace the entire phone.
It is important to note that if your phone does get wet, the best thing to do is act quickly. Even if you are able to revive and fix your phone, long-term water damage can still occur and result in your phone having a shorter lifespan.
