Skip to Content

What is a 10200 CB code?

The 10200 CB code is a type of code used in Citizen Band (CB) radio communication. CB radios are commonly used in communication between drivers of trucks, cars, or any other vehicles traveling along highways or roadways. While using CB radios, users have a set of codes or language that they use to communicate with each other without revealing their exact location, identity or private information.

CB codes such as the 10200 CB code are a set of numbers or phrases that can be used to convey certain messages between users, without compromising prior agreements. The 10200 CB code specifically is not a widely used or well-known code among CB radio users, therefore, the message or meaning associated with it might be something that is private or personal between specific users.

CB codes such as the 10200 code, are also useful in situations where vehicle drivers have to report accidents, traffic congestion or provide assistance to other drivers through radio communication. Using these codes makes it easier and quicker to communicate essential information without causing confusion and time lags because codes come with a unique and fixed meaning.

The 10200 CB code, like other CB codes, serves a specific purpose in CB radio communication. A user may specifically use this code to convey certain messages or information privately and discreetly with other users. These codes make CB communication easier, quicker and smoother for users who need to communicate without exposing their private information.

What does 10200 mean in CB talk?

In CB talk or Citizen’s Band radio communication, 10200 is not a common code or term. The most commonly used CB codes and terms have been standardized by the Federal Communication Commission (FCC) and International Telecommunication Union (ITU) to aid in efficient and effective communication between CB radio users.

The standardized CB codes and terms are typically numerical codes that represent commonly used phrases and commands in CB communication such as “10-4” (meaning “understood” or “message received”) or “CB radio 19” (referring to the channel commonly used for highway communication). These codes are used to enhance communication clarity and speed, especially in emergency situations where every second counts.

Hence, 10200 doesn’t fit into any of these commonly used CB codes and terms. It is possible that 10200 may have a specific meaning within a particular CB community, but without context or further information, it is impossible to determine what it might mean.

In general, understanding CB codes and terms is essential for anyone who uses CB radios, especially for truckers and other drivers who use CB radios for communication purposes while on the road. It is important to become familiar with the various codes and terms used in CB communication to ensure efficient and effective communication with other users.

What are the 10 codes for CB?

CB codes or Radio codes are used in citizen band radio communication. These codes are generally used to communicate information quickly and precisely between the sender and the receiver. CB codes are often used by trucking companies, emergency services, and people who use CB radios for recreational purposes.

Below are the ten codes for CB radio communication:

1) 10-4 – Affirmative or Acknowledged. This code signifies that the message is heard and understood.

2) 10-20 – Location. This code indicates a question on where the receiver is currently located.

3) 10-32 – Vehicle to vehicle communication. This code is used when a driver wants to speak with another driver using their CB radio.

4) 10-33 – Emergency traffic only. This code is used to signal that the communication is urgent and that emergency services must be contacted immediately.

5) 10-36 – Time check. This code is used to request the time from the receiver or the other end of the communication.

6) 10-42 – End of communication. This code signals that the communication is over, and the sender has finished their message.

7) 10-50 – Break, as in “breaking the silence.” This code indicates that the sender is about to enter a conversation or interrupt another conversation.

8) 10-78 – Need assistance or backup. This code is generally used by emergency services to request additional support.

9) 10-90 – Alarm signal or fire. This code signals a fire, smoke, or carbon monoxide alarm that requires action.

10) 10-99 – Mission completed. This code is often used by emergency services or individuals who have finished a task.

Cb codes are an essential element in effective communication using CB radios. Knowing these codes can help one communicate quickly and efficiently with others while driving or in an emergency situation.

What setting should my CB be on?

The setting for your CB radio will depend on various factors such as location, terrain, other CB users in the area, and the type of communication you intend to have. There are a few standard settings for the Citizen’s Band (CB) radio that you can keep in mind to get started.

Firstly, before you set any settings, check if the CB radio is switched on and correctly wired in your vehicle. Then, tune your radio to channel 19 – the most popular channel for highway communication. Channel 19 is the designated trucker’s channel and is heavily used for general communication on the road.

If you are looking for a specific person or organization, try the channel they have specified.

The primary thing to set is the Squelch control – this is a tool that reduces the background noise that your radio picks up. Turn the control knob clockwise until you hear static noise, then turn the knob anti-clockwise until the noise disappears. This setting will help you hear other radio users more clearly, especially if there are overlapping signals.

If you are in a heavily populated area with many CB users, you may want to switch to a different channel with lower traffic level, which can help prevent overlapping signals that lead to poor sound quality. In that case, you can scan through different channels or ask a fellow CB radio user what channel they prefer.

Another important setting is the modulation control, also known as the mic gain. This option enables you to adjust the volume level of your radio in real-time, allowing you to enhance or decrease the volume of your transmission. Ensure that your mic is between 4-10” away from your mouth, and speak into it clearly, so that other CB users can pick up your voice.

Finally, if you are traveling through hilly or dense terrain, you might encounter difficulty in transmitting to other users. In such cases, switch the RF gain, which controls the signal sensitivity, to ‘high’ or adjust your antenna. These settings’ changes vary based on your radio and antenna types.

Setting your CB radio will depend on several factors, but channel 19 is a great place to start. Adjust your Squelch control, Modulation control or MIC gain, and, if necessary, improve your signal sensitivity to obtain excellent communication with other users. Keep in mind that efficient, clear communication is essential to ensure safe driving, navigate traffic, and request help if needed.

What are the basic 10 codes most commonly used?

The use of codes in communication has become an important aspect of various industries, including law enforcement, emergency services, and transportation. In particular, the use of 10 codes is very common in these industries, as they enable communication efficiency and privacy.

The basic 10 codes most commonly used can vary depending on the industry and location, but there are some that are commonly used among different organizations. These codes are often referred to as the “10 codes” or the “ten signals” and are a standardized list of coded phrases for conveying information quickly and effectively.

Here are the basic 10 codes that are commonly used:

1. 10-4: This code is used to indicate that the message being sent has been received and understood.

2. 10-8: This code is used to indicate that the officer or individual is back in service and available for calls.

3. 10-7: This code is used to indicate that the officer or individual is indisposed or busy and cannot respond to calls.

4. 10-20: This code is used to indicate location, usually referring to the location of the vehicle or person.

5. 10-33: This code is used to indicate that an emergency situation is occurring and that assistance is needed.

6. 10-36: This code is used to indicate that the officer or individual is taking a restroom break.

7. 10-79: This code is used to indicate a traffic accident.

8. 10-99: This code is used to indicate that the situation is serious and warrants immediate response.

9. 10-50: This code is used to indicate a vehicle accident.

10. 10-21: This code is used to ask for a telephone call, usually referring to a police officer asking someone to call them.

These basic 10 codes are just a few examples of the many codes that exist within different industries. While these codes are standardized and widely used, they may vary slightly in different locations or between different organizations. However, the primary purpose of these codes remains the same—to facilitate quick and efficient communication in high-pressure situations.

What CB frequency do truckers use?

Truckers use specific citizen band (CB) frequencies to communicate with each other while on the road. The most commonly used CB frequency among truckers is the Channel 19 frequency, which operates at 27.185 MHz. This frequency has become the go-to channel for truck drivers to communicate during their long and often solitary journeys.

CB radio frequencies in the United States are divided into 40 channels ranging between 26.965 MHz to 27.405 MHz. The channels are designated by channel numbers from 1 to 40. Each channel has its own unique frequency and is set up to cover a specific range of distances.

Truckers often use CB radios as a way of keeping themselves entertained and alert during long trips, as they can use the radios to communicate with other truckers about road conditions, traffic, weather, and other issues. They can also use CB radios as a way of forming partnerships known as convoys, where several trucks travel together, increasing their safety and efficiency on the road.

Apart from Channel 19, truckers may also use other frequencies such as Channel 9 which is an emergency channel, Channel 17 and Channel 10. However, it is important to note that the use of the emergency channel is strictly for emergency situations only.

The CB frequency that truckers use depends on the information they want to relay, their location, and the audience they want to reach. Nevertheless, the most commonly used CB frequency by truckers is Channel 19 due to its wide coverage and easy accessibility.

What is the meaning of 10 on 10?

The phrase “10 on 10” is an idiom that originated in the entertainment industry, particularly in the context of film reviews and ratings. In simple terms, it means a perfect score or rating of 10 out of 10. When something is rated as “10 on 10,” it essentially means that it is outstanding and meets all the expectations and criteria for excellence in its genre or category.

This phrase is widely used and understood by people worldwide, not only in the entertainment industry but in various aspects of life where ratings and evaluations are involved. It can be used to describe anything that is considered flawless or exceptional, whether it be a product, a performance, an experience, or an individual’s abilities or achievements.

The use of this phrase has become so popular that it has extended beyond the context of ratings and evaluations. It is now commonly used as a compliment, indicating that something is impressive, remarkable, or praiseworthy. For instance, if someone expresses their admiration for another person’s skills or accomplishments, they may say, “Wow, you’re definitely a 10 on 10!”

“10 on 10” is an expression that represents a perfect score or rating, indicating excellence and quality. It has become a part of our everyday language and is widely used to describe anything that is considered impressive, remarkable, or exceptional.

Why do CB codes start with 10?

The reason CB codes start with 10 is for compatibility with other radio communications systems. CB radios are based on a system known as AMPS (Advanced Mobile Phone System) which dates back to the 1980s.

This system requires radio transmitting and receiving codes to begin with 10 as a standardized prefix in order to differentiate CB radio communications from other radio transmissions. This prefix helps ensure that all CB radios will understand the same communication code regardless of the type of radio being used.

Once the code is received it can then be deciphered by a CB radio based on the number of digits that follow it. Additionally, the 10-code system is internationally recognized and was adopted by the International Telecommunications Union (ITU) in 1985 as the standard for land mobile radio communications for CB radios.


  1. Complete List of CB Codes | CB 10 Code and What They …
  2. The Complete List of CB 10 (Citizens Band Radio) Codes
  3. CB Radio Slang and 10 Codes – Right Channel Radios
  4. 10 codes CB Codes
  5. 10-200 – CB Slang Dictionary