Skip to Content

Is it OK to completely drain an inground pool?

Yes, it is generally okay to completely drain an inground pool. However, it is important to do so with caution, as it can cause significant damage to the structure of the pool. Before draining the pool, it is important to check with the manufacturer to ensure that the pool is made to handle being drained.

Additionally, you should consult with a pool professional before draining the pool to make sure that the pool is properly vented and that the water can be drained safely. Once the pool is drained, it is important to refill it slowly to reduce any potential damage caused by the pressure of the water on the pool shell.

For instance, if a pool is drained too quickly, the lining of the pool may crack or get damaged due to the pressure of water being added. Additionally, it is important to check for any ground water movement once the pool is full and to pump any ground water that is present.

Finally, it is important to clean and inspect the filter, pump, and other equipment after the pool has been filled before using the pool.

Can you completely drain a concrete pool?

Yes, a concrete pool can be completely drained. This type of pool is one of the easiest to drain and will require only a few tools. To begin, you must first make sure that the pool is completely empty, meaning that there should be no water inside.

It is important to note that the pool should never be emptied completely in one go, as doing so could cause structural damage to the surrounding concrete.

Next, you will need to plug the main drain valve in the pool and the skimmer line. Doing this will allow you to slowly and safely empty the pool. You will then need to attach a hose to the suction line that is located near the pool’s pump and PVC piping.

This hose should then be placed securely down a drain to avoid backflow.

Once the hose is secured in the drain, it is time to turn on the pump. Make sure to check the water level regularly to ensure that the pool is draining safely. Once the pool is almost empty, the final step is to open the main drain valve, open the skimmer and let out all the remaining water in the pool.

Note, however, that it’s important to follow the draining instructions of your specific pool type to avoid any damage.

Can you drain an inground pool and leave it empty?

Yes, it is possible to drain an inground pool and leave it empty. However, this should only be done when absolutely necessary, as leaving the pool drained of water can cause significant damages to the pool’s structure and construction.

Whenever possible, it is much better to keep an inground pool filled with water and chemicals to ensure it remains properly balanced and maintained.

When draining an inground pool, the first step is to turn off all of the power related to the pool’s pump and filtration system. Then, you must remove all of the water, which is usually done by attaching a submersed pump to one of the pool’s main drain lines.

If draining and refilling the pool is unavoidable, great caution should be taken to prevent damaging the interior components as the water is removed. After the water is completely drained, tiles and other surfaces must be brushed clean and the pool must be inspected for any hidden damage that may have been caused by the absence of water.

In short, it is possible to drain an inground pool, but this should only be done when absolutely necessary and the process must be conducted with great caution, as damage can easily occur. Whenever possible, it is better to keep the pool consistently filled and maintained.

Why you shouldn’t drain a pool?

Draining a pool is not generally recommended, as it can be a time-consuming and potentially hazardous process. Additionally, it can cause damage to the pool itself and even create additional problems that would need to be addressed by a professional.

Pools that are not drained properly can lead to cracks and other structural damage to the pool walls or liners. In extreme cases, improper draining can even lead to the pool completely collapsing. This can be especially dangerous if there are nearby gas lines, drains, or electrical lines.

Additionally, draining can cause water damage to landscaping, and can even disrupt underground utilities such as water, electricity, and gas. Chlorine levels can also be affected, and can leave the pool water contaminated.

Finally, draining a pool can affect the chemical balance of the pool water by reducing pH, alkalinity, and other vital components. This can leave the pool unusable for up to a week after it is refilled in order to get the balance back to normal.

What happens if you drain a pool completely?

If a pool is drained completely, it can lead to a few different consequences. First, the pool shell and any attached equipment can be affected by a vacuum break, when the pressure in the pool is much lower than the pressure of the soil and groundwater outside it.

This could cause the pool walls to buckle and the equipment to become damaged.

Second, it can cause the water to rapidly evaporate and the resulting change in humidity can cause the surrounding air to become extremely dry. This can cause wooden decking and other nearby outdoor furniture to shrink, warp and become weathered.

Additionally, if the pool hasn’t been properly drained, the walls may crack due to uneven settling or lack of backfill material.

Third, draining the pool completely can result in algae and other organic growth, because without a steady circulation of water, sunlight and nutrients, algal growth can run rampant. This can make it difficult to balance the pH of your pool’s water when refilling it.

Finally, the plumbing connected to your pool will likely become clogged if allowed to sit for an extended period of time. The lack of motion in the pipes can cause debris and minerals to build up, which can lead to a costly repair or replacement job.

In summary, when draining a pool, it is important to follow proper procedure and fill it up again as soon as possible to minimize the potential damage.

Can I drain my concrete pool for winter?

Yes, it is possible to drain your concrete pool for winter. It is recommended to drain your pool every couple of years in order to clean it, repair any cracks or issues, and to prepare it for the coming winter.

Before draining the pool, you should check local ordinances and laws to ensure you are in compliance and not harming the environment in any way. You will also need to check to see if the pool has a separate drain system that can be used to reduce the water level or if you will need to completely drain the pool and fill it back up in the spring.

Additionally, you will need to remove any and all pool equipment such as ladders, rails, light fixtures, and any other items that could be damaged if allowed to remain in place while the pool is drained.

Once the pool is drained, you will need to inspect the pool for cracks and other damage, and make any necessary repairs. Finally, once all repairs are complete you should clean and treat the pool and the surrounding area before refilling the pool for the warmer months.

How do you drain standing water from concrete?

The best way to drain standing water from concrete is to use a wet vacuum or shop vacuum. These will work to pull the water out of the concrete by creating a vacuum with the help of a hose. It is important to note that you should use a wet vacuum specifically designed for water removal as using a standard vacuum cleaner could potentially cause damage due to the amount of water it will be trying to extract from the concrete.

Additionally, you can also use a sump pump to remove the water. The sump pump will need to be lowered into the water and will draw water into the pump and then expel it out. It is important to make sure the water is not expelled too close to the area or it could potentially cause damage to surrounding areas.

If you need to move the water farther away, you can rely on a hose attached to the sump pump that can extend out as far as 25 to 100 feet.

What is the way to empty a pool?

Emptying a pool is a process that requires some preparation before beginning. The following steps will help you successfully empty a pool.

Step 1: Disconnect All Pool Equipment – Before beginning, you’ll need to disconnect all equipment in the pool such as pumps, heaters, filters, and vacuums. This is to both prevent any damage to the equipment and to help the pool drain more efficiently.

Step 2: Shut Off the Filter System – You’ll also need to shut off the filter system to ensure that the water doesn’t flow back into the pool, which would make draining the pool much more difficult.

Step 3: Turn off Pump and Lower Water Level – Begin by turning off the pump, then use a submersible pump or a siphon to lower the water level. Make sure to leave some water in the shallow end of the pool to avoid strain on the sides from the weight of the empty pool.

Step 4: Drain the Rest of the Water – When the water level is low enough, use a wet-dry vacuum or sump pump to drain the rest of the remaining water out of the pool.

Step 5: Clean the Pool – Once the pool is empty, it’s time to clean it. Use detergents, brushes, and other cleaning materials to give the pool a thorough and deep cleaning before refilling.

Step 6: Refill the Pool – Once the pool is clean, you can begin the process of refilling it. Use a garden hose or a special filling device to fill the pool to the desired water level.

By following these steps, you can easily and safely empty a pool. It’s important to remember that emptying and refilling a pool is a time consuming process, so make sure to give yourself enough time and prepare the necessary materials before starting.

What are the steps to drain water from a pool?

Draining a pool involves several steps and should be done carefully to avoid damaging the sides, bottom, and structure of the pool.

1. Turn off the pump, filter, and other pool equipment so that the suction isn’t pulling water from the pool.

2. Check the local water level regulations to make sure the pool can be drained without violating any regulations regarding pool size, temperature, and safety.

3. If applicable, attach a pool cover or cover cloth over the pool to catch any water that splashes out. This will also help keep leaves and other debris from getting into the pool as it drains.

4. Position a pool drain hose at the lowest point in the pool and attach it to a sump pump, an available spigot, or a garden hose. For an inground pool, the sump pump should be set up in the pool’s main drain.

5. Open the spigot or increase the water level in the sump pump if present and begin draining the pool. Be sure to check the drainage levels periodically and stop when there is only a few inches of water left in the pool.

6. Once the water is drained, close the spigot, turn off the sump pump, and remove the pool cover or cover cloth. Clean up any debris or sediment cleaned from the pool.

7. When the pool is drained, check the pH and alkalinity levels of the pool water, adjust as needed, and then fill the pool back up.

Can I drain my pool water on the lawn?

No, you should not drain your pool water on the lawn. The pool water can contain chlorine or other chemicals that can be harmful to the grass and soil. Additionally, a large amount of water being added to the ground at once can cause the soil to become oversaturated, which can cause the grass roots to become waterlogged and weak over time.

A better option would be to drain the excess water into a stormwater drain or other natural drainage area in order to ensure the water is being properly filtered and dispersed. Additionally, you should always check with your local water authority to see what regulations might apply in your area.

How do I drain my pool by myself?

Draining a pool by yourself can be a difficult, but rewarding, task. Here is a step-by-step guide so you can do it successfully:

1) Prepare your pool pump and filter. Start by turning off the breaker and then disconnect all the hoses, plugs, and fittings on your pool filter and pump.

2) Connect your hose. Connect a garden hose or another suitable flex hose to the drain line at the bottom of your pool filter or pump, and run the other end of the hose to the appropriate draining location.

3) Turn on your pump. Turn the breaker back on and switch on the pool pump. Depending on the type of pump you are using, you may need a submersible pump for this task. Check the owner’s manual for details.

4) Monitor the draining process. The water should start to flow from the pool into the hose and out to the draining location. Make sure the hose is not kinked or clogged. Monitor the water level of the pool so you don’t over-drain the pool and damage the walls or bottom of the pool.

5) Prime the pump again after the pool is drained. Once the water has been sufficiently drained, turn off the pump and switch off the breaker before disconnecting the hose. Then reattach the plugs, fittings, and hoses to the pool filter and pump, and prime the pump with water before turning on the breaker and the pool pump.

Following these steps should help make draining your pool a safe, easy process.

Can pool water be drained to the street?

No, it is illegal and potentially hazardous to drain pool water to the street. Disposing of pool water must be managed in an approved and safe manner to protect the environment and public health. Pool owners must be responsible and properly dispose of their wastewater.

Generally, pool water should not be drained directly to storm drains or ditches that lead to rivers, lakes, or streams. It is preferable to filter the water and collect it into a drainage canister. The canister should be emptied into a sanitary sewer, rainwater basin, or to an area on the property where plants will absorb the water.

If a property’s septic system is approved to process pool water, it can be drained there. Pool owners should also check with their local municipality and follow any additional rules and regulations. Failure to properly handle wastewater could result in hefty fines, so it is important to follow protocols and not drain or dump pool water into the streets.

How do I drain my pool without flooding my yard?

Draining a pool without flooding your yard requires careful planning and preparation. Start by removing any dirt or debris from the pool and the surrounding area. Next, shut off the pool’s circulation pump and turn off the filter and heater.

Skim the surface of the pool to remove all debris, leaves, and other objects that could clog the pool’s drains.

Partially draining the pool gradually is one way to avoid flooding your yard. Place a sump pump at the surface of the pool to reduce the water level, and place a bucket or other container beneath the sump pump to safely disperse the excess water away from the pool and your yard.

Once you’ve removed some of the water with the sump pump, turn off the power to the pool equipment, such as the filter and pump, to avoid any water coming back into the pool.

Alternatively, you can drain the entire pool at once. Make sure that your pool’s water level is at least 10 inches below any hardscape or landscaping. Place a hose and pump far away from the pool deck and garden area, and choose a low spot in your yard to drain the water.

If possible, plug a hose into a nearby storm drain to prevent any flooding.

When the desired water level is reached, plug and cap the pool lines to avoid contamination and unbalance of chemicals. To keep the pool clean and protected while it’s drained, cover it with a tarp to reduce the risk of accumulating dirt and debris.

Regardless of how you choose to drain your pool, it’s important to take steps to ensure that your yard won’t be flooded in the process.

Can I backwash my pool into my lawn?

No, it is generally not recommended to backwash your pool into your lawn. This is because the large volume of water and chlorine, as well as other chemicals, that are released during the backwashing process can damage your grass, plants and flowers.

Additionally, many regions have regulations preventing backwashing into lawns, as it can contaminate groundwater and nearby water sources. Finally, the extra effort and time it would take to backwash your pool and the resulting cleanup could become costly, troublesome and time-consuming.

If you decide to backwash your pool, it is recommended that you use a drain rather than backwashing into your lawn. This will allow you to properly dispose of the pool water and avoid potentially damaging your lawn.

Where do you drain above ground pool water?

When draining an above ground pool, it is important to ensure the water is being drained safely and responsibly. To begin, use a sump pump or submersible pump to draw water out of the pool and away from your yard.

The safest option is to send the water to a nearby storm drain if possible, being mindful of any regulations in your area related to runoff management. If a storm drain isn’t available, you can direct the water to a drainage area such as a lower part of your yard, making sure to keep it away from your home’s foundations or other structures.

Be sure to use a hose with a check valve if possible to keep the water from going back into the pool. The best practice is to disconnect the pool drain line and route it to the area you are draining the water to.

This helps the pool fill up faster and reduces loss of water due to backflow. After the water is completely drained and the pool is empty, it is important to inspect the pool and make any necessary repairs prior to filling it back up.