An 8 by 12 by 16 concrete block typically weighs between 73 and 89 pounds, depending on the type of cement used. This is because the density of concrete blocks is usually between 1200 and 160 kg/m3. For an 8 x 12 x 16 block of concrete, the volume is 1152 cubic feet, and when multiplied with the density it gives a result between 87.
2 and 144. 32 kg or 192 and 318 pounds. So, in general, an 8 by 12 by 16 concrete block would weigh around 73 to 89 pounds.
Table of Contents
What is the actual size of a 16 concrete block?
A standard 16 concrete block, also called a cinder block, measures 16 inches long by 8 inches high by 8 inches deep. The width of a cinder block will typically vary depending on the manufacturer because the shape of the block can differ slightly.
Generally, it is around 2. 5 inches thick. The finished size of a cinder block will be slightly smaller due to the mortar joints around it, therefore the actual size will be 15 5/8 inches long, 7 5/8 inches high, and 7 5/8 inches deep.
Is block cheaper than concrete?
The answer to this question depends on a variety of factors, including the cost of materials, labor costs, and the size and complexity of the project. Generally speaking, block masonry is usually less expensive than concrete when it comes to smaller projects, such as a garden wall or a small boundary wall.
In general, block is cheaper than concrete by about 25-30%. On the other hand, when it comes to large-scale projects like foundations, concrete will often be the cheaper option due to the large labor costs associated with block masonry.
Ultimately, the cheapest option will depend upon the size and complexity of the project, as well as the cost of materials and labor.
Is it cheaper to build with block?
Whether building with block is cheaper depends on the complexity of the project. Generally, blocks can be cost-effective when constructing simple walls and foundations, as the blocks are quite inexpensive and easy to use compared to other materials, like poured concrete or brick.
However, for more complex and labor-intensive projects, block building can be more expensive due to the amount of effort and specialized equipment involved in correctly constructing and interlocking the blocks.
Additionally, block building may also require additional materials, such as joint reinforcing and grout, while poured foundations do not, further driving up the cost of using blocks. Ultimately, when considering the cost effectiveness of building with block, it’s important to evaluate the particular size and complexity of the project, as the cost can vary greatly depending on the project’s requirements.
Is poured concrete better than block?
It really depends on the application. Poured concrete is typically better than block in terms of durability because it forms a monolithic slab that is difficult to damage. Poured concrete is also a better choice when used in exterior applications because it lacks the visible seams and gaps that often occur in block masonry construction.
Poured concrete is also more resistent to cracking, which is important if the application is exposed to frequent changes in temperature and moisture.
On the other hand, block masonry is generally less expensive than poured concrete and tends to possess greater insulation properties. Block masonry is also more malleable, which means it can be configured in more shapes and is more suitable for targeted applications such as curved walls or a design with a lot of angles.
Finally, block masonry is faster to install than poured concrete, which can lead to cost savings.
Ultimately, it is best to evaluate each application point-by-point in order to determine which material is the best choice. An experienced professional can help identify the best material for your specific project.
Are block basements good?
Block basements can be a good option for a home or other structure, depending on the specific needs and circumstances of the building project. Block basements are typically made with solid concrete blocks that are stacked and mortared together.
This type of construction provides a lot of strength and durability. It is also relatively inexpensive and simple to construct. Additionally, the concrete blocks provide thermal mass benefits, which can help regulate temperature across the entire surface area of the foundation.
One major benefit of block basements is that they require little maintenance over their lifetime. Concrete blocks are highly resistant to water damage, extreme temperatures, and fire, so they do not require painting or other preventative care.
Additionally, they can generally be easily modified and repaired, should a problem arise.
Overall, block basements can be a good option for a building, as they are strong, cost effective, and require little maintenance. However, they are not without potential drawbacks. For example, block basements can be difficult to install, particularly for large basement structures.
Additionally, many jurisdictions require a licensed contractor for these types of projects, which can add to the cost and complexity of the installation. As such, it is recommended that you research all the pros and cons of a block basement before making a decision.
Why did they stop making cinder blocks?
Cinder blocks are a type of masonry building material made from cement, sand, and coal ashes. They were popular for the construction of walls and foundations in the mid-20th century, but have since become less in demand.
This is because of the introduction of other material types like concrete blocks, which are more durable, lighter-weight, and easier to install. Additionally, cinder blocks require a higher degree of maintenance and are more likely to deteriorate over time compared to other masonry materials.
They are also not suitable for certain construction projects like sidewalks, driveways, or retaining walls, due to low compressive strength. In today’s construction industry, cinder blocks are used sparingly but may still be used in some wall applications or as footings due to their affordability.
What is the problem with block foundation?
The problem with block foundation is that the blocks may not be laid uniformly and may not provide the structural integrity needed for a sound foundation. The blocks need to be laid uniformly in a level plane and with exacting precision in order to ensure that the foundation will be structurally sound.
Additionally, a block foundation cannot be adjusted once the blocks are laid, so if the foundation is not laid properly, the entire foundation may need to be redone in order to make it structurally sound.
The blocks themselves can be fairly heavy and require lifting equipment, which can add both time and cost to the foundation installation. Finally, block foundations are vulnerable to water intrusion, and waterproofing may need to be done to protect the integrity of the foundation.
Is concrete block good for home?
Yes, concrete block is a good material for homes, particularly in regions that experience extreme weather and high winds. Concrete block is naturally energy efficient, providing reliable insulation from extreme heat and cold.
Additionally, it is extremely durable and long lasting, and is naturally resistant to both fire and insects. In areas that experience regular earthquakes, concrete block is also a good option, since the solid nature of the material is well-suited for the forces at play during an earthquake.
Finally, cinder block is relatively inexpensive and easy to construct, making it a popular and cost-effective material for homes in many areas.
Why are houses in Florida built with cinder blocks?
Houses in Florida are typically built with cinder blocks for several reasons. First, cinder blocks are incredibly durable and can withstand extreme climates, making them an ideal choice for buildings in areas that are prone to hurricanes and other storms.
Furthermore, cinder blocks provide excellent insulation and can help keep buildings cool during hot weather by trapping in cool air. The blocks also offer a high degree of fire resistance and are generally more affordable than other building materials.
Additionally, cinder blocks also provide a sound-proof barrier, making them a great choice in busy beach cities. The blocks are easy to install, providing flexibility when designing a building layout, and they blend well with a range of architectural styles.
Ultimately, cinder blocks can provide both form and function, helping Florida buildings withstand the elements while providing much needed insulation and sound proofing.
How many 12 inch cinder blocks are on a pallet?
It depends on the size and manufacturer of the cinder block, as well as the size of the pallet. Generally, a pallet of 12-inch cinder blocks will contain around 500 blocks, depending on the manufacturer and the size of the blocks.
Most 12-inch cinder blocks are 8x6x12 in size and are packaged with 10 cinder blocks per cube on the pallet. However, some manufacturers also produce 12-inch blocks that are 8x8x12 in size, which will reduce the number of blocks per pallet to around 400.
How many sq ft is a pallet of cinder blocks?
A pallet of cinder blocks typically contains about 64 blocks. The size of a cinder block is 8 inches wide by 16 inches long and 8 to 12 inches high. Therefore, a single cinder block requires approximately 1.
282 sq ft, meaning a pallet of cinder blocks would cover approximately 82. 56 sq ft. This size can vary depending on the type, shape, and size of the cinder blocks. Furthermore, it is also important to consider the time, effort, and other resources needed when determining how many blocks are required for a project.
How many cinder blocks do I need for a 12×16 shed?
The amount of cinder blocks needed for a 12×16 shed will depend on the type of shed build you are doing, as well as the size and thickness of the cinder blocks you are using. Generally, for a basic shed build, you will need between 6 to 8 cinder blocks for the perimeter of the shed, depending on how wide the foundation is.
Additionally, depending on how tall the shed is, you may need more cinder blocks for the walls of the shed, which would increase the total number of cinder blocks you need. Furthermore, if you opt to build your shed with a stepped foundation, you should plan for the number of cinder blocks to increase accordingly to accommodate the width of the step.
For example, if one side of the shed has a step of 4 inches, you will need to add 4 cinder blocks to that side of the shed to account for the extra width of the step. Finally, if you are using different sized cinder blocks and/or laying them in a certain pattern, you should plan and ensure that you have calculated the right amount of cinder blocks to fit your desired shed size and build.
What size is a pallet of blocks?
The size of a pallet of blocks can vary depending on the type of block and the quantity of blocks included. Generally, a pallet can hold up to 1,000 blocks and measure 4 feet by 4 feet. A pallet of all concrete blocks may measure 4 feet by 4 feet by 3 feet high and weigh 4,000 pounds.
A pallet of bricks, however, may measure 4 feet by 4 feet by 4 feet high and weigh 6,500 pounds. Most block pallets include strapping and shrink wrapping for secure transportation.
