Identifying the correct replacement cartridge for a Price Pfister faucet can be a difficult task, as there are several styles and types of cartridges that have been produced over the years. The easiest way to accurately identify the correct cartridge is to first determine the model number of the faucet.
If you do not have the original paperwork from when your faucet was installed, the model number should be printed on a small, metal tag under the faucet handle or on the underside or side of the faucet body itself.
Once you have identified the model number of your faucet, you can visit the Price Pfister website to find the exact replacement cartridge for your model. They even have a “Parts Identification” section on their website, which can help you identify your faucet’s cartridge from the pictures and descriptions provided.
Additionally, you can always take the old cartridge to your local home improvement store and have a representative help you find the exact replacement. Many times, an exact model number is not necessary, as they may be able to simply match up your cartridge visually.
Finally, if you are still having trouble, you can always contact the Price Pfister customer service and ask for help in identifying the correct replacement cartridge.
Table of Contents
How do I know what shower cartridge I have?
The best way to determine what kind of shower cartridge you have is by visually inspecting it. Start by removing the cover plate on your shower and then look at the valve inside. Check the make and model of the cartridge, as this will help you figure out what type you have.
Many of today’s cartridges are either single handle models or two-handle models. If you can’t figure out the make and model, look at the numbers and letters printed on the cartridge itself. This will usually tell you the manufacturer and the specific model you have.
You can also remove the entire cartridge and take it to your local plumbing supply store, where a knowledgeable employee should be able to assist you in finding the correct replacement for your particular model.
Where do I find my faucet model number?
You can usually find the model number for your faucet on the manufacturer’s website. Alternatively, you may need to look on the actual faucet itself. Depending on where the faucet is located and how visible it is, you may need to remove the handle, or detach the faucet to see the model number.
If the faucet is installed in the wall, the model number may be on the body, but in some cases it may be hidden behind trim pieces. Additionally, you may be able to find the model number in the installation manual that came with the faucet.
Additionally, you should be able to call the manufacturer’s customer service line to get help locating the model number for your faucet.
How do I find the model of my price Pfister faucet?
Finding the model of your Price Pfister faucet can be done by locating and examining the faucet for identifying information. Under the spout you should see the brand, “Pfister”, stamped in the metal.
Take a look at the handle, either on the front or the side, for a small metal index, a raised bump or oval sticker with the model number listed on it. This number should be something like “LF-XXX” with three numbers or letters after the LF.
With this information, you can look up the specific model page at www. pricepfister. com and identify your faucet. If you still cannot find the model number, please contact Pfister customer service at 1-800-732-8238 and they will help you identify the correct model number.
How to replace cartridge in price pfister single handle kitchen faucet?
Replacing the cartridge in a Price Pfister single handle kitchen faucet is relatively easy, and can be done without hiring a professional handyman. To start, shut off the water supply to the faucet head.
Underneath the sink, locate the stem unit as well as the retaining nut that holds the stem in place. Once found, carefully unscrew the retaining nut and remove both the stem unit and the old o-rings.
Inside the stem unit is the cartridge. Carefully remove it and discard. Place the new cartridge into the stem unit, aligning it properly to ensure proper operation. Next, replace the o-rings and slide the stem unit back into the faucet head and thread the retaining nut back on the stem unit.
Once done, ensure that the nut is securely tightened so that it will not come undone in the future. To finish, turn the water supply back on to the faucet head and turn on the faucet to check for any leaks.
With these simple steps, you can easily replace the cartridge in your Price Pfister single handle kitchen faucet.
Can I replace a faucet cartridge without turning off water?
No, it is not recommended that you attempt to replace a faucet cartridge without turning off the water. Doing so may lead to flooding and costly repairs. It is important to turn off the water supply at the main shut off valve before attempting to replace a faucet cartridge.
Doing so will prevent water from spilling out and damaging the surrounding area. After turning off the water, it is important to open the faucet and let any remaining water drain out to ensure none enters the new faucet cartridge.
Once the cartridge is replaced, you should inspect the system for leaks prior to turning on the main shut off valve and restoring water flow.
How do you remove the cartridge from a Price Pfister shower faucet?
Removing a cartridge from a Price Pfister shower faucet involves several steps. Before beginning, make sure that the water is turned off to the faucet.
1. Remove the handle of the faucet. You may need to use a Phillips head screwdriver to remove the set screw or screws in the back.
2. Take out the cam and packing from the body of the faucet. You may need to use a flathead screwdriver to do this.
3. Use a cartridge puller to remove the cartridge from the faucet. Place the puller around the cartridge and press down to release the cartridge.
4. Remove the clip or nut above the cartridge. This may require the use of a wrench or pliers.
5. Remove the cartridge and replace it if necessary. Be sure to apply plumber’s grease to the new cartridge before you install it.
6. Make sure to reinstall the cam and packing, clip or nut and handle before turning the water back on.
Do you have to turn the water off to replace a faucet cartridge?
Yes, it is necessary to turn the water off in order to replace a faucet cartridge. Shutting off the water allows you to work on the faucet without any possible flooding. You can turn the water off by turning the shut off valve under the sink, or by turning off the main water shut off for the entire house.
Once you have shut off the water, go ahead and remove the handles of the faucet, and you will be able to access the cartridge and replace it as necessary. When you are finished, you can turn the water back on and test the faucet to make sure it is working correctly.
Can I replace a shower cartridge myself?
Yes, replacing a shower cartridge is a relatively simple DIY task that can help extend the life of your faucet or shower and save you money on a plumber. The first step is to turn off the water to the shower and then remove the handle and the escutcheon plate connected to the valve stem.
Then you’ll need to take apart the cartridge and replace any o-rings and O-rings, or other parts as needed. Finally, you’ll need to reassemble the parts and reattach the handle and escutcheon plate. As with most DIY jobs, it’s important to follow safety precautions and to make sure that each step is done properly in order to avoid any issues.
Additionally, it’s best to read the instructions carefully before starting and to have all the necessary tools on hand. If you have any doubt about your ability to perform the task, it’s best to consult a professional plumber.
How much does a plumber charge to replace a shower cartridge?
The amount a plumber charges to replace a shower cartridge can vary depending on the difficulty of the job and the cost of the replacement parts. A plumber may charge an hourly rate, a flat fee, or a combination of the two.
Additionally, the cost may also include the cost of the parts being used.
On average, a plumber may charge around $50 to $250 to replace a shower cartridge. This cost can also depend on the condition of the existing fixtures as well as the materials you’re looking for. For example, if the existing shower cartridge is in bad condition, the plumber may need to source additional parts and this could increase the overall cost.
When hiring a plumber, always ask for a quote and a detailed breakdown of the cost. This will help ensure that you’re not surprised by any additional costs and that you’re aware of all the pieces of work that will be completed.
What is the difference between a shower valve and a shower cartridge?
The main difference between a shower valve and a shower cartridge is the way they control water flow. A shower valve is a larger component that typically consists of two levers or knobs, which are used to control the water flow and temperature.
The valves can be mechanical or electronic and may even have an additional diverter that allows you to switch to an overhead or hand-held showerhead. A shower valve also has an integral strainer or aerator, which prevents sediment and other impurities from entering the water supply and clogging the valve.
A shower cartridge is smaller in size and is typically used in single-handle shower valves, which only need one lever or knob to turn the valve on and adjust the temperature and water pressure. The cartridge contains a valve stem, seals, and disks that are designed to control the rate of water flow and vary the temperature.
The cartridge also contains a sensing mechanism that ensures the valves aren’t exposed to too much pressure, which could cause damage. Generally, shower cartridges are made of hard wearing materials and are designed for easy installation and replacement.
What causes shower cartridge failure?
Shower cartridge failure is usually caused by the breakdown over time from regular wear and tear due to exposure to water, soap, minerals, and acids. Additionally, shower cartridges can be affected by improper installation, or by problems with the water supply such as high pressure, or cold temperatures, or insufficient lubrication.
Other causes of shower cartridge failure can include accumulation of mineral deposits, mechanical issues like a broken part or damaged valve seat, or even low water pressure. Improper cleaning and maintenance can also be a factor in shower cartridge failure, as well as using the wrong type of shower cartridge.
Does Pfister have a lifetime warranty?
Yes, Pfister does offer a lifetime warranty on many of their products. This industry-leading warranty guarantees that consumers are safe and protected against any potential manufacturing defects. The warranty covers all their faucets, valves, showerheads, bath accessories, and flush valves, as long as they are installed in residential locations with domestic water use.
Customers must purchase the product from an authorized Pfister retail partner in order to qualify for the lifetime warranty. This warranty also includes a “no-leak guarantee” that ensures that if the product leaks due to a manufacturing defect, Pfister will replace the leaking part.
Customers will also receive a lifetime warranty on the finish of their product so that it continues to look like new.
Is Price Pfister the same as Pfister?
No, Price Pfister and Pfister are not the same. Price Pfister is a brand of home and kitchen fixtures owned by the parent company, Spectrum Brands, Inc. Pfister, on the other hand, is a brand of home and kitchen fixtures owned by the parent company, Fortune Brands Home & Security, Inc.
Although both brands offer similar products such as faucets, showers, and bath accessories, their designs and features are slightly different. Moreover, Price Pfister’s style tends to be a bit more traditional compared to Pfister’s modern look.
Lastly, Price Pfister fixtures tend to be more affordable than Pfister fixtures.
How do I identify my faucet brand and model?
Identifying your faucet brand and model can be done by examining the faucet itself or gathering information on the product. If you are examining the faucet itself, start by looking for any logos, stickers, or markings that might identify what brand the faucet is.
There is usually a logo or a small nameplate on the faucet. This can help you identify the manufacturer of the faucet. Additionally, you may need to gather information from the original installation paperwork or from the faucet’s warranty, if there is one.
A walk-through of your faucet may also provide information on the type of faucet and its materials. Additionally, the manufacturer in a label or nameplate on the faucet may be able to provide the model number.
Model numbers may also be found inside handles or on parts. Once you have gathered information on the brand and model, performing a web search can help you find additional details on the specific faucet and provide any replacement parts or installation instructions if necessary.
