Yes, AutoZone does offer brake light replacement services at many of their stores. Depending on the make and model of the vehicle and the type of brake light that needs to be replaced, the AutoZone technician may be able to install the brake light in-store or they may need to order it and have it shipped to your home.
However, before you go to AutoZone, be sure to check the store’s location and hours as some stores may be closed during certain times of the day or closed on certain days of the week or may not offer the brake light replacement service at that location.
Additionally, AutoZone associates may conduct a visual inspection of your vehicle’s brake light to determine the make, model, and type of brake light that needs to be replaced before they are able to order and install a new one.
Table of Contents
How much should a brake light replacement cost?
The cost of a brake light replacement will vary depending on the make and model of your vehicle. Generally speaking, the cost to replace a brake light can range anywhere from $50 to $400. The cost generally depends on the labor involved to access the lighting system.
If a mechanic needs to remove the entire bumper, the cost may be on the higher end. Also, if the light burnt out due to an electrical issue, extra labor may be required to repair the wiring. As a result, the cost of a replacement brake light will range significantly.
It is best to contact a trusted mechanic to provide you with an accurate estimate of the cost.
Does O’Reilly install brake light bulbs?
No, O’Reilly does not install brake light bulbs. O’Reilly is an auto parts and service retailer, so they sell auto parts and supplies but do not typically offer installation services. They offer products to fit most vehicles and have a wide range of brake light bulbs from which to choose.
To install a brake light bulb, it’s generally best to visit a professional auto repair shop or mechanic for the installation – however, you could also do it yourself if you’re familiar with auto repair and are comfortable doing the job.
Does Advance Auto Parts install lights?
Yes, Advance Auto Parts offers light installation services at many of its stores. Depending on the store, they may offer installation services for headlights, fog lights, tail lights, turn signals, exterior marker lights, daytime running lights, and third-brake lights.
When booking the appointment, customers should specify the type of light they are having installed. Advance Auto Parts also sells a wide range of light kits, bulbs, and replacement parts, so customers can buy their lighting products in the store and have them installed at the same time.
Will AutoZone install lights?
No, AutoZone does not offer installation services for headlights, taillights, turn signals, or other lighting components. However, they do offer a wide range of replacement lighting products and a one-year warranty on parts.
This can help you get the parts you need to make the repair and installation yourself. Although AutoZone stores are not equipped to do the installation themselves, they can order specialty parts and help you with any questions you may have.
The technicians and staff at an AutoZone store may also have tips on the best headlight bulbs, which headlights to choose, or how to install the lights properly. For any questions about installation, you should contact your local store for more information.
Will AutoZone change your headlight bulb for you?
Yes, AutoZone can change your headlight bulb for you. Many of their stores offer a “Free Fix-It” service which includes a free bulb replacement, check engine light diagnosis and wiper blade installation.
Every AutoZone store is equipped with the tools necessary to change headlight bulbs. Before you go to the store, make sure to look up what type of headlight bulb you need for your car, as it varies based on the vehicle.
The store will likely also ask you to bring your vehicle’s owner’s manual, as some vehicles need to be taken apart before the bulbs can be replaced or adjusted. Once at the store, AutoZone associates will be able to guide you on purchasing the correct headlight bulb and will assist you in their installation.
Is it easy to replace a brake light bulb?
Replacing a brake light bulb is relatively easy and doesn’t require many special tools. Most of the time, you can find the brake light bulb right in the tail light housing mounted to the back of the car.
All you need to do is unscrew the plastic panel and then pop out the old bulb. Make sure to have a clean rag handy when taking out the old bulb so you don’t get grease on the new bulb. Once you have the old bulb out, you can put the new bulb in, screw the plastic panel and housing back on, and the job is done.
Does Walmart install tail lights?
No, Walmart does not install tail lights. However, Walmart does carry a wide selection of tail lights that customers can purchase and install themselves at home. The products will range from automotive-grade tail lights to designer tail lights, and customers are able to select an option that best fits their vehicle and budget.
In addition, when customers purchase a tail light at Walmart, they can typically find a helpful guide included in the packaging to provide step-by-step instructions on how to install the product. Alternatively, customers who would prefer to have the lights installed professionally can take their vehicle to virtually any mechanic shop and they should be able to do the installation.
Can I change brake lights myself?
Yes, it is possible to change brake lights yourself. It can be a great way to save money, as it’s usually much cheaper than having the work done by a professional. While it sounds intimidating, it’s actually not that difficult of a task and you don’t need many tools.
Before starting, make sure that your vehicle is in Park and that the engine is off. Also, consult your owner’s manual for details about the specific brake lights for your vehicle.
To begin, you’ll need to remove the trim around the brake light. How you do this depends on the vehicle and light setup, but there may be screws or clips that need to be unclipped or unscrewed. Once the trim is off, you can access the bulbs that need to be replaced.
Firmly grasp the bulb and apply a gentle twist to the bulb to remove it from the socket. Make sure that you don’t touch the bulb with your bare hands since this can reduce its lifespan. Once the old bulb is out, insert the new bulb into the socket and, while gently twisting, make sure that the contact is secure.
Next, reattach the trim and repeat the process on all bulbs that need replacing. After all the new bulbs are in and all trim is secure, turn on the car and double check that all lights are working.
How much does it cost to get tail lights installed?
The cost to get tail lights installed depends on the specific lights used and the complexity of the installation. It can range anywhere from $150-$400. The cost of the lights themselves could also be added to the total final cost along with labor.
This cost can also vary by region, so it’s best to do some research in your area to get the best cost. Depending on the make and model of your vehicle, the connection points may be different and could require additional housing that may add more to the total installation cost.
Additionally, the installation technician may require a testing fee to make sure the tail lights work correctly before leaving. It is always a good idea to get a quote in writing from the installation technician before the job begins.
Do mechanics fix brake lights?
Yes, mechanics can fix brake lights. Typically, replacing a brake light bulb is a simple repair that any knowledgeable mechanic would be able to do. However, sometimes a brake light may not be working due to an issue with the wiring, a faulty switch, or a blown fuse.
In these cases, a mechanic may be able to diagnose and repair the underlying issue and then replace the light bulb.
If you believe the brake light is not well-functioning, it is best to bring in your vehicle to a mechanic or automotive store and have it looked at. The mechanic can advise you on the best course of action to repair the light.
How much do brake lights cost to fix?
The cost of fixing brake lights can vary significantly depending on the kind of vehicle you own and the extent of the repair needed. For example, the price of replacing a brake light bulb can range from as low as $10 to over $100, while the cost of replacing a brake light switch could cost anywhere from $30 to $150 or more.
In other cases, if the wiring harness or tail light assembly needs to be replaced, the repair cost could be many times higher than the cost of a bulb or a switch. Additionally, different vehicles may also require different brake light parts that may have different prices depending on the make, model and year of your car.
Overall, the cost of fixing brake lights can be quite expensive, depending on the type of problem you have and the type of vehicle you own. It is generally recommended to have an experienced mechanic inspect your car and identify the exact cause of the brake light problem.
After that, the mechanic should be able to provide a more accurate cost estimate for the repair.
What do I do if my brake light is out?
If your brake light is out, it’s important to address the issue as soon as possible. To start, check your vehicle’s owner manual to find out the specific steps for a brake light replacement. Typically, you will need to locate and access the housing containing the brake light bulb, which means you will likely need to remove the inside panel of your car to access the light housing.
After doing so, use a socket wrench to unscrew the bulb, remove it, and replace it with a new one. Be sure to use a new bulb of the same size and wattage as the original one. Once the light has been replaced, look to see if the light turns on when the brakes are pressed.
If the brake light remains out, you may need to get it checked out by an experienced mechanic or automotive technician. They can troubleshoot the issue and determine if other components of your car’s brake system need to be replaced, such as the brake relay switch, brake pedal switch, or wiring harness.
Replacing these components can be complex and require professional expertise, so it’s important to get help from a professional if you are not comfortable doing so.
What lights does AutoZone check?
AutoZone has a few different diagnostic tools and services that they can use to diagnose and check the lights on your vehicle. One of the tools that they use is a Digital Multimeter, which enables them to test for a variety of different electrical and lighting issues.
They also have a code scanner that can be plugged into your vehicle’s computer to detect any errors or codes that could be causing issues with the lights. Finally, their free battery and alternator testing can provide more information about why the lights are not performing properly, including detecting a faulty battery or alternator.
Can I drive with a broken taillight?
No, you cannot drive with a broken taillight. Driving with a broken taillight could put you at risk of being pulled over by the police and receiving a citation. It is illegal in most states to drive a car with a broken or missing taillight due to safety concerns.
Not having a functioning taillight makes it harder for other drivers to see you at night or in dense fog, increasing the risk of an accident. Additionally, having a broken taillight goes against the local state laws in most areas and could result in a ticket.
If you need to drive, it’s best to get your taillight fixed before you get behind the wheel.
