No, the Bissell CrossWave Pet Pro is not just a vacuum, but rather an all-in-one floor cleaner that both washes and vacuums your floors at the same time. The Crosswave Pet Pro’s dual actions mode allows it to deep clean your hard floors, as well as vacuum and wash your area rugs.
It is designed to thoroughly clean dirt and pet messes from sealed hard floors with the active brush roll and powerful suction. Plus, its multi-surface pet brush roll gently washes area rugs, for a clean and healthy home.
Table of Contents
Can Bissell CrossWave vacuum without water?
No, the Bissell CrossWave is a multi-surface cleaning product that requires the use of both water and cleaning solution in order to effectively clean and protect your floors. The CrossWave is not a dry vacuum and cannot be used without water.
The design of the CrossWave provides a unique combination of suction and multi-surface cleaning action to both wash and suction dirt and debris from your floors, ensuring a deeper clean than a traditional vacuum alone can provide.
The use of water and cleaning solution helps to break apart and then lift the dirt and debris away from the floor, while leaving your floors looking shiny and residue free.
Can you vacuum carpet with Bissell CrossWave pet pro?
Yes, you can vacuum carpet with the Bissell CrossWave Pet Pro. This multi-surface cleaner is specifically designed to vacuum and wash both sealed hard surfaces and carpeted floors. Its three-stage cleaning system includes a dual-action brush roll for picking up pet hair, dirt, and debris from carpets, and its pet-focused multi-surface formula is designed to clean pet messes like tracked-in dirt and fur from area rugs and carpets.
Plus, the easy-rinse brush roll system allows you to easily clean pet hair and debris from the brush with the press of a button. Additionally, the Bissell CrossWave Pet Pro comes equipped with an extra-large dustbin, an extra-large solution tank, and an extra-large brush roll, all of which make it easier to clean large areas quickly and effectively.
With the Bissell CrossWave Pet Pro, you can easily vacuum and clean your carpets in one pass.
Why can’t the Bissell CrossWave be used on carpet?
The Bissell CrossWave is a great multi-surface cleaner, however, it is not designed to be used on carpets. Carpets are traditionally a tougher surface than hard floors and require a more intense cleaning solution.
The CrossWave is designed to mix water and formula to clean hard floors, area rugs and other hard surfaces, but it’s not built to handle the deep debris that can get stuck in carpets. Other types of vacuum cleaners, usually upright models with a beater bar, are designed to loosen and remove deep embedded dirt, giving carpets a more thorough cleaning.
Additionally, carpet fibers are sometimes too delicate to handle a machine like the CrossWave, which can be too abrasive and damage the delicate fabric.
Is Bissell CrossWave safe for engineered hardwood?
Yes, Bissell CrossWave is safe for engineered hardwood. Engineered hardwood is a type of flooring composed of several layers of plywood that have been glued together and topped with a hardwood veneer.
This type of flooring is less susceptible to water damage than traditional solid hardwood flooring, which makes it an ideal choice when using a wet-vac machine like the Bissell CrossWave. The CrossWave has a dual-action brush roll that is designed to lift and remove dirt and debris from your floors in a single pass, while a spill-free tank helps keep liquids contained so that your floors remain clean and dry.
Additionally, it is designed to clean wall-to-wall and with its low 4. 4-ampere motor, it won’t scratch, scuff or otherwise damage engineered hardwood, giving you the peace of mind that your floors are clean and safe.
What should you not use on hardwood floors?
It is important to avoid using certain products on hardwood floors to avoid damaging them and decreasing their lifespan. You should avoid using abrasive cleaning products, such as steel wool, scouring pads, and abrasive powder cleaners, as these can scratch and damage the finish of the hardwood floor.
Additionally, you should not use products that contain oil soaps, wax, acrylic polishes, or lacquers. These products can cause the floor to become dull and could leave it vulnerable to future damage.
Lastly, you should avoid using vinegar, ammonia, detergents, and bleach, as these products can erode the finish and leave marks. Being aware of the products that should not be used on hardwood floors is essential to maintain and protect the flooring.
What cleaner is safe for engineered hardwood floors?
When it comes to cleaning engineered hardwood floors, there are a variety of options available. One of the safest and most effective cleaners for engineered hardwood is a water-vinegar solution. The vinegar helps to cut through any dirt and grime, while the water will help to rinse away any residue.
When preparing this solution, mix one cup of white vinegar into one gallon of warm water. This can then be used with a mop or a damp cloth to clean the floor. For tougher spots, a soft-bristled brush can be used with the cleaning solution for additional scrubbing power.
Additionally, it’s important to note that hardwood floors should never be soaked with a cleaning solution and it’s important to use a soft mop and avoid excess water. To finish off the cleaning process, be sure to wipe the floor dry with a soft cloth or paper towel.
What does the CrossWave pet Pro do?
The CrossWave Pet Pro is an innovative, multi-surface cleaning device designed to make cleaning floors much easier. It works on both hard surfaces like tile, linoleum, laminate, and sealed hardwood, as well as area rugs and low-pile carpets.
It does this by vacuuming up pet hair, dirt, and debris while simultaneously washing and drying floors in one step. It also utilizes a unique, pet-friendly brush roll and solution that removes pet stain & odors while cleaning.
With this device, you can easily clean all your surfaces in half the time, while giving your floors a superior clean. The dual-action brush roll uses both a hard and soft surface bristle, making it gentle on delicate carpets but powerful enough to dig into those tough-to-reach, stuck-on messes.
Additionally, it’s equipped with an easy-fill tank, wash and rinse mode selection, LED tank indicator light for solution tracking, and a low-profile foot that can easily get under furniture. The CrossWave Pet Pro is the perfect solution for busy pet families who don’t have a lot of time to dedicate to cleaning their floors, but also want a superior clean.
Does the CrossWave Max clean carpet?
Yes, the CrossWave Max cleans all types of carpets, including high-pile and low-pile carpets. The vacuum uses an area/stair cleaning brush roll and bristles to loosen dirt and debris, while dual-action multi-surface cleaning formula picks it up.
The CrossWave Max also removes pet hair and tough stains from carpets – making it perfect for households with pets. Additionally, the vacuum’s smart-touch digital controls provide 3 modes for customizing carpet cleaning performance, for those that need a little extra help with their carpets.
Why is my Bissell CrossWave leaving streaks on the floor?
If your Bissell CrossWave is leaving streaks on the floor, it could be caused by a few different issues. The most common causes are incorrect cleaning fluid being used, the CrossWave brush being worn out, or the CrossWave brush not being used correctly.
Incorrect cleaning fluid: The CrossWave cleaner can be used with only Bissell’s Multi-Surface cleaning formula. If you are using a diluted formula or a different brand of cleaner, it may not give you the best results.
Make sure you are using the Bissell Multi-Surface formula if you are using the CrossWave.
Worn-out brush: Over time, the CrossWave brush can become worn out and unable to scrub the floor effectively. If this is the case, you may need to replace the brush.
Incorrect use of brush: If the brush is not used correctly, it can leave streaks on the floor. Make sure that you are scrubbing the floor with the brush at the right angle and pressure.
If you are still experiencing problems, you may want to contact the Bissell customer support team to diagnose the issue. They may be able to offer further advice and help you with any parts or cleaners you may need.
